Post
Topic
Board Mining support
Re: S3+ (BM1382) Overclocking with voltage setting
by
pekatete
on 16/12/2014, 18:24:46 UTC
On C1, with 218.75M(default) what voltage should i set, currently is 0760. Is it ok, because im not getting over 950ghs
First, you need to ensure that your C1 is NOT running the November firmware before you can change the default setting. This thread is beyond that scope, but a lot has been said in the S3 discussion and support thread.

The datasheet setting for the freq range of 225 (which I'd say 218.75 falls) is 0.72v, so I'd test with a voltage setting of 0720 which should be more than adequate for that freq.

Again, do at your own risk!