Post
Topic
Board Hardware
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
by
opentoe
on 17/12/2014, 19:32:58 UTC
My Sp 20 is disconnecting/ stopping mining for no reason. I have 1300PSU platinum going and it keeps knocking itself offline. The fan is still running so the only way I can tell is when I log into it, which I can't do at that point. I log into my stats page on eligius and I can see I am zero hashing. If I reboot PSU then it comes back on. Seems to be happening between every 4 and 24 hours. Is anyone else having this issue?
I have reset to factory and now trying to run. we will see how this goes.

lower your watts setting to 250 and drop the  all the volts by .005

you are taxing the psu.

 My seasonic  1200 strains to run this  and I have to use lower settings then my evga 1300's

PS: I'm running mine on a pair of CX750's though and have been having this issue too... any suggestions/advice? Cheesy

well my thread has tests for 5 sp20's  they are more like 1400 to 1500gh.  

Unless you can stand the noise and have really cold air. Since all 5 are in my garage directly under my bedroom. I have no choice but to do massive under clocking.
1350gh

I can say that these are not a 1700gh miner do -10%

 which is  1530gh  work from there.

5 SP20's right under your bedroom. You MUST live alone? I have an attached garage, which I tried my SP10 in and still couldn't keep it there from those high pitch fans. Then you wouldn't believe what happened. My good friend brought over his 2 SP10's and told me to go into the house, while he was in the garage. I heard him start up his SP10's then turn then off. He called for me to come out into the garage and low and behold the 2 SP10's were running! He made this audio box, same width size of the SP10. Has a bunch of what looked like speakers to me installed in it and the box was connected to some control with a few knobs on it. He turned one of the knobs slowly and the sound started to get louder and louder. I know nothing about frequencies or audio waves, but all the box does is cancel out all the audio/frequency waves from the miners. Not sure how it works, but since he wants to sell them, he wouldn't let me take a picture. Trust me, it was just a plain wood box with many different sized speakers I think. He said he has a few versions he's working with and making them variable tuning so the timing and frequencies aren't tied to one miner rig. Which would be impossible anyway, maybe our ears think they all sound the same, technically they are not. He was showing me all this on some meter be brought over. When he sells them he said he would make a post here with a youtube video. I don't know any of the details.