Re: Can't find Antminer S3 IP address

I have tried using IP scanner to find the IP address and nothing is showing up for 192.168.0, 192.168.1, or 192.168.2. I have tried resetting it multiple times in the hopes of resetting it to 192.168.1.99 but no luck. Any suggestions?

What do the lights do? Does it seem to still be hashing?

And on reset if you do it the IP should be 192.168.1.99 . It takes around 10 seconds of holding in the little button after it takes a few minutes to do the restart.

The green and red lights are both on. It's not hashing because I don't have it setup on my new router. If I hold down the reset button nothing happens. If I power it off and back on while holding reset then the red light flashes until I turn it off.

I would give it 3-5 mins to reset. What IP range is your router using?

I've already given it an hour to reset and I've let it sit after turning it off. The router is set to 192.168.0 but I've tried connecting it to a laptop set to 192.168.0 thru 192.168.2. The IP scanner can find my other S3 just not this one.