Thank you for your insightful question and interest in our CoolTank 10KW project. I appreciate your expert observations on the choice of two-phase immersion cooling for small-scale miners. Let me provide some context and additional information.

Extensive Experience: I've worked extensively as a consultant for building single-phase immersion cooling mining farms in UAE. During this time, I've gained a wealth of knowledge and insights into the complexities and cost-effectiveness of different cooling techniques.

CAPEX vs OPEX: With my experience in building single-phase immersion cooling farms, I've observed a consistent pattern: while single-phase immersion cooling usually has a lower initial capital expenditure (CAPEX), the operational expenditure (OPEX) tends to be higher over the long run. Given this trade-off, we've chosen two-phase immersion cooling for the CoolTank 10KW, as it provides higher efficiency and, over time, can lead to cost savings.

Pricing Details: I agree that pricing is a critical aspect of any product. While we are still fine-tuning the production process for the CoolTank 10KW, we're planning to share the target selling price as we progress further in the product's development. Your patience and understanding on this matter are appreciated.

Future Development Plans: We are mindful of the needs of various segments within our target market. With that in mind, we're considering the development of both standard and simplified versions of CoolTank. The simplified model will not include busbars but will provide cable management. Also, it will come without a smart controller, instead having a float sensor. This model will not include pumps and a dry cooler; however, specifications will be made available so that customers can source these components on their own if needed.
Once again, I appreciate your interest in our project and your insightful comments. Your understanding of the industry certainly raises valuable points, and I hope my response addresses your concerns effectively.

Hey everyone,

I wanted to share something I've been working on that I think could be really interesting to this community. It's called the CoolTank Project, and it's all about making crypto mining more efficient and accessible, especially for small-scale miners.

The project started back in 2019 in Dubai, where we were trying to solve overheating problems in air-cooled mining farms. After a lot of research, we decided to use 2-phase immersion cooling technology. Read Our Story. https://www.thecooltank.com/about

We've developed the CoolTank 75KW and a smaller CoolTank 10KW, designed for home use and exhibitions. These aren't just efficient; they're designed to boost mining profits, extend the lifespan of your miners, and work well even in extreme conditions. Learn More https://www.thecooltank.com/case-studies

Recently, we held a crowdfunding event to help fund the development of these products. I'm excited to say that the CoolTank 10KW was fully funded by a single contributor! This means we're now in the development and construction phase. https://www.thecooltank.com/crowdfunding

I'd love to share updates about the project here, if that's okay with the moderators. I think it could be a great way to keep everyone in the loop and get your feedback and ideas. After all, this project is about developing something that's useful for all of us in this community.

I've seen many posts here about how to start mining on a small scale, and I genuinely believe the CoolTank could be a game-changer. I'd love to hear your thoughts, and if anyone wants to get involved or offer help, that would be amazing.

Just to be clear, this isn't an advertisement. I'm sharing this because I believe it's interesting and relevant to this community. I'm looking forward to hearing what you all think!

Read my story here: https://www.thecooltank.com/about

Unfortunately I can't add pictures to u message here. I created a blog post on my website to answer your message. https://www.thecooltank.com/post/ntroducing-advanced-cooling-technologies-for-cryptocurrency-mining-in-the-uae

The main idea is immersion cooling is for long term mining. You'll squeeze maximum from every new model of miner and be ahead of competitors. Economy of scale is also is very useful. I am working on small CoolTank for home use.

Thank you for your insights. Natural air cooling and well-ventilated locations can indeed be cost-effective solutions for small-scale or home-based mining operations. However, when it comes to larger-scale operations, especially in hot climates, air cooling can become less efficient and more challenging.

I have extensive experience running a mining farm in Dubai, where temperatures can reach up to 50 degrees Celsius in the summer. In such conditions, air cooling is not sufficient to prevent overheating, and the cost of air conditioning can be prohibitively high.

That's why I developed the CoolTank, a 2-phase immersion cooling system specifically designed for these challenging environments. It allows for a 40% overclock, significantly boosting mining profitability, and it's adaptable to a wide range of environments.

While the initial setup cost for an immersion cooling system can be higher than for an air-cooled system, the increased mining output and the savings on cooling costs can make it a worthwhile investment in the long run.

You can learn more about my journey and the development of the CoolTank on our website: [CoolTank About Us](https://www.thecooltank.com/about).

Thank you for your input, NotFuzzyWarm. You're absolutely right that overclocking doesn't increase the THs/J efficiency. However, in the rapidly evolving world of cryptocurrency mining, the lifespan of a miner is typically 2-3 years before newer, more efficient models hit the market.

In this context, the goal of many miners isn't necessarily to maximize THs/J efficiency, but rather to maximize the total output (THs) of their miners within their effective lifespan. This is where our CoolTank technology comes into play. By allowing a 40% overclock, we enable miners to significantly boost their total output, thereby increasing their mining profitability before their miners become outdated.

Of course, this approach may not be suitable for everyone, and it's always important for each miner to consider their own specific circumstances and objectives. But for those looking to maximize their short-term returns, our CoolTank technology offers a compelling solution.

Sure, here's a draft message for you:

"Hello! I'd like to introduce you to an innovative project that's transforming the landscape of cryptocurrency mining - The CoolTank Project. We're pioneering advanced immersion cooling technology for optimal mining operations. Our flagship product, the CoolTank 75KW, offers unparalleled performance and reliability, significantly boosting mining profitability.

We've designed the CoolTank to effectively cool overclocked ASIC hashing boards and adapt to a wide range of environments. Our technology allows for a 40% overclock, leading to a substantial increase in mining profits.

We're currently hosting a crowdfunding event to build our pilot sample of the CoolTank 75KW. The most generous contributor will receive the pilot sample once testing is complete.

You can learn more about our project and see examples of our work at [CoolTank Case Studies](https://www.thecooltank.com/case-studies).

We're excited to be a part of your cryptocurrency journey. Welcome to the future of crypto mining. Welcome to The CoolTank."

Hello everyone,

We're excited to announce that our flagship product, the CoolTank 75KW, is now ready for manufacturing. This advanced immersion cooling tank is set to revolutionize the cryptocurrency mining industry.

To kickstart the manufacturing process, we're hosting a crowdfunding event. The funds raised will be used to build the first sample of the CoolTank 75KW, allowing us to conduct comprehensive testing and troubleshooting.

Here's the exciting part: the most generous contributor to our crowdfunding event will receive the pilot sample once testing is complete. This is a unique opportunity to be one of the first to own our groundbreaking product.

For those new to our project, you can learn more about our journey and the story behind the CoolTank Project here: https://www.thecooltank.com/about

We also invite you to explore some of the successful implementations of our CoolTanks here:https://www.thecooltank.com/case-studies. These case studies provide a glimpse into the tangible benefits our technology can deliver.

We invite you to be a part of this exciting phase in our journey. Learn more about our crowdfunding event and how you can contribute https://www.thecooltank.com/crowdfunding

Hello everyone,

I'd like to introduce CoolTank, an innovative solution for crypto-mining cooling. It's energy-efficient, boosts mining profits by 40%, and is easy to install.

We're crowdfunding to advance our technology. Your support would be greatly appreciated. Learn more and contribute here: https://www.thecooltank.com/crowdfunding

Thanks for your time!

Hello everyone,

In my recent deep dive into crypto mining cooling solutions, I discovered The CoolTank Project. They're pioneering an immersion cooling technology that could potentially enhance mining profitability by enabling a 40% overclock.

Their products, CoolTank 75KW and the upcoming CoolTank 10KW, are designed to effectively cool overclocked ASIC hashing boards under diverse conditions. It's quite a fascinating development in the crypto mining sphere.

For those interested, you can find more about their project here: https://www.thecooltank.com/case-studies

Thought this might spark some interesting discussions in our community.

Hello everyone,

In my recent exploration of cooling solutions for crypto mining, I stumbled upon The CoolTank Project. They're developing immersion cooling solutions, like the CoolTank 75KW and an upcoming 10KW model, aiming to boost mining profitability and efficiency by allowing a 40% overclock.

They're currently working on their first samples, which could bring some exciting developments to the crypto mining industry.

You can learn more about their project here: https://www.thecooltank.com/crowdfunding

I thought this might spark some interesting discussions in our community.

I checked all links. No one can provide detailed 3D models. Only external dimensions, however I need dimensions of each component.

I’m still looking for scrap Antminer S19 and Whatsminer M30.

Merry Christmas!

Thank you. This is very good advice.

Thanks mate. Interesting resource, but they have only obsolete Antminer S9 and no warranty of accuracy.
I’m still looking for parts to make my own 3D model.

Hi all!

I’m looking for scrap (not working) Antminer S19 or Whatsminer M20/30 parts: hashing board, control board and PSU.

I need all this to make 3D models. I’m doing an engineering of CoolTanks.

Can anyone sell/donate required parts?