Search content
Sort by
Showing 16 of 16 results by 7h3235
Re: [ANN][POOL][PPLNS/SOLO] 2Miners.com [ETH,ZEC,BTG,ETC,ETP,PIRL,DBIX,ZCL...]
Hi there!
I'm mining with you guys for almost a week now, I used to mine at MPH and due to the lack of support, I left them.
I use ETHMonitoring, and it shows me that I have a very stable Hashrate, and a consistent share/hour. But, on the 2miners dashboard I don't see this, in fact, it is showing me an average hash rate quite below. I also see huge variations on the round share perpetuals.
The round shares percentualls I can understand(altough I don't quite agree), but, why the hashrates doesn't reflect what I'm seeing locally, and, how could I prevent or correct it?
I'm mining with you guys for almost a week now, I used to mine at MPH and due to the lack of support, I left them.
I use ETHMonitoring, and it shows me that I have a very stable Hashrate, and a consistent share/hour. But, on the 2miners dashboard I don't see this, in fact, it is showing me an average hash rate quite below. I also see huge variations on the round share perpetuals.
The round shares percentualls I can understand(altough I don't quite agree), but, why the hashrates doesn't reflect what I'm seeing locally, and, how could I prevent or correct it?
Well, it seems that no one will appear here to answer me.
I noticed a strange behavior on this pool. It starts rewarding you with a value that seems about right, perhaps a little bit higher. But, in the days that follow, it consistently drops.
The ethereum values that were being rewarded to me, droped consistently after the first few days to values that was even lower than what MPH was rewarding in the last days mined there. So, as soon as it reached the payment, I switched to YOCOIN. The pool reward me with 104 YOCs on the first day, 98 on the second day, 92 on the third and now it is rewarding me 82 in the last 24h.
I'm mining with the same rashrate for days, and as it was on the ethereum pool, it is showing me a lower value.
This feels very weird.
Re: [ANN][POOL][PPLNS/SOLO] 2Miners.com [ETH,ZEC,BTG,ETC,ETP,PIRL,DBIX,ZCL...]
Hi there!
I'm mining with you guys for almost a week now, I used to mine at MPH and due to the lack of support, I left them.
I use ETHMonitoring, and it shows me that I have a very stable Hashrate, and a consistent share/hour. But, on the 2miners dashboard I don't see this, in fact, it is showing me an average hash rate quite below. I also see huge variations on the round share percentualls.
The round shares percentualls I can understand(altough I don't quite agree), but, why the hashrates doesn't reflect what I'm seeing locally, and, how could I prevent or correct it?
I'm mining with you guys for almost a week now, I used to mine at MPH and due to the lack of support, I left them.
I use ETHMonitoring, and it shows me that I have a very stable Hashrate, and a consistent share/hour. But, on the 2miners dashboard I don't see this, in fact, it is showing me an average hash rate quite below. I also see huge variations on the round share percentualls.
The round shares percentualls I can understand(altough I don't quite agree), but, why the hashrates doesn't reflect what I'm seeing locally, and, how could I prevent or correct it?
Re: EthMonitoring \ EthControl (EWBF, Claymore's, CCMiner, AntMiner, Android/iOS)
Hi There!
I'm doing some testes, and I'm using a Asus RX570 4GB ROG STRIX. I'm current able to see all the informations, except the power consumption, it informs GPU0: 0 W
Am I doing something wrong, or this is a current bug? I'm on version: 0.0.19a
Thanks.
I'm doing some testes, and I'm using a Asus RX570 4GB ROG STRIX. I'm current able to see all the informations, except the power consumption, it informs GPU0: 0 W
Am I doing something wrong, or this is a current bug? I'm on version: 0.0.19a
Thanks.
Hello,
Windows AMD does not report power usage, only linux with EthMonitoring OS does currently.
Hello,
For Linux it works yes, for windows no success yet.
Since you provide us with such a great tool, let me give you an idea.
Since it looks like your app cannot obtain the power consumption directly from the GPU, you could use GPU-z, which provides a log to file option. You could then configure your app to execute GPU-z with a set of configurations, like capture interval, and then capture the parameters from the file. Hope it helps!
BTW, KUDOS for the "update button" on the web page. I used it, and it worked like a charm!
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
eth pool is good, +1% luck over last 7 days, you have nothing to whine for... https://ethereum.miningpoolhub.com/index.php?page=statistics&action=blocks
unlike all equihash, which are horrible misconfigured...
Whine? Dude, with the same config, and the same results, both Mh/s and shares, today I'm receiving 15% less ethereum than what I was receiving a week ago. unlike all equihash, which are horrible misconfigured...
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
Thats only normal
But I hate to admit because I am a long time user of this pool but I'm advising others to go use a different pool. The support here has disappeared. Dont get burned on an exit scam folks.
But I hate to admit because I am a long time user of this pool but I'm advising others to go use a different pool. The support here has disappeared. Dont get burned on an exit scam folks.
Hi there!
By normal you say the variation is normal, or this new values of rewarding prone to be permanent?
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
Hi there!
I'm solo mining ethereum for some time now. I'm mining the same MH/s and shares that I used to have about three weeks ago, but, MPH is awarding me about 10% less in ethereum.
Does anyone knows if something changed to cause this?
Thanks!
I'm solo mining ethereum for some time now. I'm mining the same MH/s and shares that I used to have about three weeks ago, but, MPH is awarding me about 10% less in ethereum.
Does anyone knows if something changed to cause this?
Thanks!
What? you are solo mining in a mining pool?
More miners on a coin = less reward in a pool
My bad, I expressed myself poorly. I'm mining Ethereum Only, not Solo...
The graphs on the pool didn't showed any relevant change in users numbers. Actually, it seems that some of the top miners are off right now.
Re: [ETHEREUM] [POOL] https://ETH.suprnova.cc 0% fee, 20 % BONUS per Block ! //
I've been mining Ether (using Claymore Miner) on eth.suprnova.cc for a few days now and although shares have been found, nothing is showing up on my eth.suprnova.cc dashboard.
It shows:
My Hashrate: 0.00 MH/s
My Balance:
Confirmed: 0.0000 ETH
Unconfirmed: 0.0000 ETH
Round earnings est: 0.0000 ETH
It doesn't show any active workers either.
Same thing on the DCR side.
This is the Claymore command I'm using:
EthDcrMiner64.exe -epool eth.suprnova.cc:5000 -ewal Zippy1970.Worker1 -epsw x -esm 3 -dpool dcr.suprnova.cc:3252 -dwal Zippy1970.Worker2 -dpsw x -allpools 1
It shows:
My Hashrate: 0.00 MH/s
My Balance:
Confirmed: 0.0000 ETH
Unconfirmed: 0.0000 ETH
Round earnings est: 0.0000 ETH
It doesn't show any active workers either.
Same thing on the DCR side.
This is the Claymore command I'm using:
EthDcrMiner64.exe -epool eth.suprnova.cc:5000 -ewal Zippy1970.Worker1 -epsw x -esm 3 -dpool dcr.suprnova.cc:3252 -dwal Zippy1970.Worker2 -dpsw x -allpools 1
Well, this is a bummer... I'm trying to change from MiningPoolHub to suprnova, and I'm in this same situation. Shares found and no information on the dashboard. Is this pool abandoned?
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
Hi there!
I'm solo mining ethereum for some time now. I'm mining the same MH/s and shares that I used to have about three weeks ago, but, MPH is awarding me about 10% less in ethereum.
Does anyone knows if something changed to cause this?
Thanks!
I'm solo mining ethereum for some time now. I'm mining the same MH/s and shares that I used to have about three weeks ago, but, MPH is awarding me about 10% less in ethereum.
Does anyone knows if something changed to cause this?
Thanks!
Re: EthMonitoring \ EthControl (EWBF, Claymore's, CCMiner, AntMiner, Android/iOS)
Hi there!
Latest version with Claymore v11.8 in execution, results:
- No messages or any other errors were shown during the load.
- Three GPUs found, parameters given in the command applied successfully for each GPU.
- FANs rotations applied accordingly to the configurations of Wattman.
So far, great job!
Latest version with Claymore v11.8 in execution, results:
- No messages or any other errors were shown during the load.
- Three GPUs found, parameters given in the command applied successfully for each GPU.
- FANs rotations applied accordingly to the configurations of Wattman.
So far, great job!
Just a follow up. Single mining ethereum at MiningPoolHub, 38 hours in execution without any rejected share.
/ThumbsUp
Re: EthMonitoring \ EthControl (EWBF, Claymore's, CCMiner, AntMiner, Android/iOS)
Hi, I'm using it right now with the Claymore v11.8
I've tried to use it with the OC Profiles, but it caused only problems to me. And even after I'd remove all the OC Profiles, they were still being loaded, also, it is showing a OverdriveNTool message:
" = is not a valid Pstate number
or something like that, each time the miner was restart.
This also caused another problem, the fans ate stuck at 70% when mining. It appears that is something related with the OverdriveNTool, but, I could not find out where it stores this config, because, even after delete the files, it was still showing the errors and keeping the fan speed. I configured the Radeon Wattman with greater fan speeds, and even that did not change the fan speeds.
PS: After delete everything, local and on website, and rebuild the configs, it stoped to inform the pstate invalid values messages, and now the commands appears to be OK, but, the fans are stuck at 70%
PS2: The fans are now with higher speeds. But the temp is a bit higher than what used to be.
I've tried to use it with the OC Profiles, but it caused only problems to me. And even after I'd remove all the OC Profiles, they were still being loaded, also, it is showing a OverdriveNTool message:
" = is not a valid Pstate number
or something like that, each time the miner was restart.
This also caused another problem, the fans ate stuck at 70% when mining. It appears that is something related with the OverdriveNTool, but, I could not find out where it stores this config, because, even after delete the files, it was still showing the errors and keeping the fan speed. I configured the Radeon Wattman with greater fan speeds, and even that did not change the fan speeds.
PS: After delete everything, local and on website, and rebuild the configs, it stoped to inform the pstate invalid values messages, and now the commands appears to be OK, but, the fans are stuck at 70%
PS2: The fans are now with higher speeds. But the temp is a bit higher than what used to be.
Hello,
Fixed pstate issue problem, it was happening when core state is empty in OC profile/custom oc list. Can you try this version.
https://github.com/JamesSmith2/EthControl/releases/tag/0.0.20_1018
Hi there!
Latest version with Claymore v11.8 in execution, results:
- No messages or any other errors were shown during the load.
- Three GPUs found, parameters given in the command applied successfully for each GPU.
- FANs rotations applied accordingly to the configurations of Wattman.
So far, great job!
Re: EthMonitoring \ EthControl (EWBF, Claymore's, CCMiner, AntMiner, Android/iOS)
Hi, I'm using it right now with the Claymore v11.8
I've tried to use it with the OC Profiles, but it caused only problems to me. And even after I'd remove all the OC Profiles, they were still being loaded, also, it is showing a OverdriveNTool message:
" = is not a valid Pstate number
or something like that, each time the miner was restart.
This also caused another problem, the fans ate stuck at 70% when mining. It appears that is something related with the OverdriveNTool, but, I could not find out where it stores this config, because, even after delete the files, it was still showing the errors and keeping the fan speed. I configured the Radeon Wattman with greater fan speeds, and even that did not change the fan speeds.
PS: After delete everything, local and on website, and rebuild the configs, it stoped to inform the pstate invalid values messages, and now the commands appears to be OK, but, the fans are stuck at 70%
PS2: The fans are now with higher speeds. But the temp is a bit higher than what used to be.
I've tried to use it with the OC Profiles, but it caused only problems to me. And even after I'd remove all the OC Profiles, they were still being loaded, also, it is showing a OverdriveNTool message:
" = is not a valid Pstate number
or something like that, each time the miner was restart.
This also caused another problem, the fans ate stuck at 70% when mining. It appears that is something related with the OverdriveNTool, but, I could not find out where it stores this config, because, even after delete the files, it was still showing the errors and keeping the fan speed. I configured the Radeon Wattman with greater fan speeds, and even that did not change the fan speeds.
PS: After delete everything, local and on website, and rebuild the configs, it stoped to inform the pstate invalid values messages, and now the commands appears to be OK, but, the fans are stuck at 70%
PS2: The fans are now with higher speeds. But the temp is a bit higher than what used to be.
Re: EthMonitoring \ EthControl (EWBF, Claymore's, CCMiner, AntMiner, Android/iOS)
EthMonitoring OS ready for public testing:
https://ethmonitoring.com/guide
- AMD & Nvidia OC support
- Custom software support
- Claymore, ccminer etc.
https://ethmonitoring.com/guide
- AMD & Nvidia OC support
- Custom software support
- Claymore, ccminer etc.
Hi there! Thank you for your previous answer and your good work.
I'm advancing in the tests, and it is working very well, except two things.
I have now three GPUs RX570 Rog Strix, and all have the same rom flashed on.
- One is in a riser, and it isn't working, keeps receiving jobs, but, only shows 0.000Mh/s (I'll replace the riser tomorrow)
- On the other two, I'm setting the values for the GPUs in the command as follow:
-cclock 1200,1200 -cvddc 850,850 -mclock 2075,2075 -mvddc 931,931
It applies the config for one GPU, and the other stays with ROM configs or Radeon Profile, if configured. On the logs I'm receiving the following messages:
Quote
00:33:50 domingo, 3 de junho de 2018 : Pulling config changes from API
00:33:50 domingo, 3 de junho de 2018 : Default oc: Referência de objeto não definida para uma instância de um objeto.
00:33:50 domingo, 3 de junho de 2018 : System.NullReferenceException: Referência de objeto não definida para uma instância de um objeto.
em EthControl.Form1.ApplyDefaultOC(GpuOCDefault oc_default, List`1 oc_list)
00:33:50 domingo, 3 de junho de 2018 : Loading config: 7h3235.RadeonEther api: 0
Am I doing something wrong?00:33:50 domingo, 3 de junho de 2018 : Default oc: Referência de objeto não definida para uma instância de um objeto.
00:33:50 domingo, 3 de junho de 2018 : System.NullReferenceException: Referência de objeto não definida para uma instância de um objeto.
em EthControl.Form1.ApplyDefaultOC(GpuOCDefault oc_default, List`1 oc_list)
00:33:50 domingo, 3 de junho de 2018 : Loading config: 7h3235.RadeonEther api: 0
Thanks again!
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
Hi There.
I'm fairly new to miningpoolhub, I used to use NiceHash.
I'm using claymore's(downloaded from the miningpoolhub link) to mine Ethereum only.
It is now mining for 11h40min with zero rejections, and I have a very stable rate of 30.2Mh/s (in the past 30 minutes, I haven't none below 30Mh/s). But, on the ethereum.miningpoolhub dashboard, it was showing only 14.4Mh/s and now is showing 9.5Mh/s
Is this a normal behavor?
Thanks.
I'm fairly new to miningpoolhub, I used to use NiceHash.
I'm using claymore's(downloaded from the miningpoolhub link) to mine Ethereum only.
It is now mining for 11h40min with zero rejections, and I have a very stable rate of 30.2Mh/s (in the past 30 minutes, I haven't none below 30Mh/s). But, on the ethereum.miningpoolhub dashboard, it was showing only 14.4Mh/s and now is showing 9.5Mh/s
Is this a normal behavor?
Thanks.
welcome to real mining. mining is based a little on luck. generally your reported speed is average miner speed. sometimes you get several shares in a short time which pool will read your speed as higher than it actually is and sometimes your unlucky and dont get a share for several mins which pool will think you have slower hashrates. Pool will only show you the actual estimated hash rate based on share.
Hi, and thanks for your answer.
I'm currently getting a rate of 24 to 26 shares/hour. But, what I'm seeing in the last couple of days is that the amount of gathered ethereum is getting lower. Today is nearly 0,002ETH/day.
I'm using Windows, and I'm giving a try to ethmonitoring, let's see.
Thanks!
Re: EthMonitoring \ EthControl (EWBF, Claymore's, CCMiner, AntMiner, Android/iOS)
Hi There!
I'm doing some testes, and I'm using a Asus RX570 4GB ROG STRIX. I'm current able to see all the informations, except the power consumption, it informs GPU0: 0 W
Am I doing something wrong, or this is a current bug? I'm on version: 0.0.19a
Thanks.
I'm doing some testes, and I'm using a Asus RX570 4GB ROG STRIX. I'm current able to see all the informations, except the power consumption, it informs GPU0: 0 W
Am I doing something wrong, or this is a current bug? I'm on version: 0.0.19a
Thanks.
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
Hi There.
I'm fairly new to miningpoolhub, I used to use NiceHash.
I'm using claymore's(downloaded from the miningpoolhub link) to mine Ethereum only.
It is now mining for 11h40min with zero rejections, and I have a very stable rate of 30.2Mh/s (in the past 30 minutes, I haven't none below 30Mh/s). But, on the ethereum.miningpoolhub dashboard, it was showing only 14.4Mh/s and now is showing 9.5Mh/s
Is this a normal behavor?
Thanks.
I'm fairly new to miningpoolhub, I used to use NiceHash.
I'm using claymore's(downloaded from the miningpoolhub link) to mine Ethereum only.
It is now mining for 11h40min with zero rejections, and I have a very stable rate of 30.2Mh/s (in the past 30 minutes, I haven't none below 30Mh/s). But, on the ethereum.miningpoolhub dashboard, it was showing only 14.4Mh/s and now is showing 9.5Mh/s
Is this a normal behavor?
Thanks.
Update: I did some fine tuning, and now it is hashing at stable 30.4Mh/s, and on the dashboard it is showing 4.78Mh/s.... WTF!!!?!??!??!
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
Hi There.
I'm fairly new to miningpoolhub, I used to use NiceHash.
I'm using claymore's(downloaded from the miningpoolhub link) to mine Ethereum only.
It is now mining for 11h40min with zero rejections, and I have a very stable rate of 30.2Mh/s (in the past 30 minutes, I haven't none below 30Mh/s). But, on the ethereum.miningpoolhub dashboard, it was showing only 14.4Mh/s and now is showing 9.5Mh/s
Is this a normal behavor?
Thanks.
I'm fairly new to miningpoolhub, I used to use NiceHash.
I'm using claymore's(downloaded from the miningpoolhub link) to mine Ethereum only.
It is now mining for 11h40min with zero rejections, and I have a very stable rate of 30.2Mh/s (in the past 30 minutes, I haven't none below 30Mh/s). But, on the ethereum.miningpoolhub dashboard, it was showing only 14.4Mh/s and now is showing 9.5Mh/s
Is this a normal behavor?
Thanks.