There were minutes of downtime in the EU server. I also wanted to point out that the statistics server loadings have become significantly slower in the last hour.
A big Thank you to Terk .Really nice work on the EU server. Rejects nearly at 0%. I like people who are dedicated to what they are doing, and Terk is one of them. So people, stop whining about a bad day and see the whole picture...
[18:06:05] New block detected on network before pool notification
Shouldn't the pool notify about block change? maybe that would reduce the rejected ratio a lot more. Plus, my sgminer is using my failback pool A LOT, really A LOT. Maybe an EU server? (please??)
1. My rejection Rate is very High bRejected: 83.9 kH/s (13.8%)
2. I am running Sapphire R9 280X. The cgminer show avg 728 KH/s where as on the website 631.7 kH/s 24-hour Average.
3. As per the website the BTC per day is 0.01218 BTC/day per MH/s.Based on this calculation the BTC/day for 700 KH/s must be .008526. However i have only 0.00565835 BTC. i e 34% less than pool profitability.
Please advise
Raw hashrate is 728 kh/s. Rejects are 13.8%. 728 kh/s * (1 - 0.138) = 628 kh/s effective. Pretty much exactly what you're seeing. And I got the same BTC/MH yesterday. Seemed to be a lower-than-average profitability day.
--
To everyone struggling with very high rejects: You can tweak cgminer to use a lower intensity while still maintaining a high hashrate via the -g 2 parameter. But that will only help if your rejects are actually higher than the pool average. If it's already equal or lower than average, then you don't really need to worry about it because the reject rate is already factored in the profitability calculation, according to Terk.
Forgive me but where is the pool average for rejects? I am at 24% rejects which can't be right! When you use the g2 parameter are there any general rules of thumb? For instance do you usually start with half the -I and -g2? Thanks in advance.
So are you trying to say that the same settings we all use and have used for months/years on profit/coin switching pools don't apply to yours because you all are doing something beyond what the most venerable pools are doing in this space? I'm just trying to understand why the admins of the pool are doing this finger pointing the miners' way. I've never seen reject rates above 10% ever... but here it's like I'm giving away 25% of my hash power and not getting the results I expect from a 90% or better share efficiency.
I want to drink the koolaid guys, don't get me wrong. There's a LOT to like here; that said, pointing the finger at the miners and saying they are doing something wrong to experience this problem only with your pool sounds unreasonable.
That said, I will adjust my mining configs tonight a bit and see if it has any appreciate effect, but I would like to know, in a detailed technical explanation from the pool admin(s) why this is our issue and not a pool-side issue.
i been with the pool for nearly 6 days and never disconnected or went to my back up pool .....but today your pool has gone down ?is that to do with too many new users, putting a strain on your server ?
have you got a back up server address/pool ?
hope you can get this sorted......
We're getting bigger, faster, stronger. In the next couple of hours there will be another server up. Stay tuned and keep on mining.
1. My rejection Rate is very High bRejected: 83.9 kH/s (13.8%)
2. I am running Sapphire R9 280X. The cgminer show avg 728 KH/s where as on the website 631.7 kH/s 24-hour Average.
3. As per the website the BTC per day is 0.01218 BTC/day per MH/s.Based on this calculation the BTC/day for 700 KH/s must be .008526. However i have only 0.00565835 BTC. i e 34% less than pool profitability.
Please advise
Raw hashrate is 728 kh/s. Rejects are 13.8%. 728 kh/s * (1 - 0.138) = 628 kh/s effective. Pretty much exactly what you're seeing. And I got the same BTC/MH yesterday. Seemed to be a lower-than-average profitability day.
--
To everyone struggling with very high rejects: You can tweak cgminer to use a lower intensity while still maintaining a high hashrate via the -g 2 parameter. But that will only help if your rejects are actually higher than the pool average. If it's already equal or lower than average, then you don't really need to worry about it because the reject rate is already factored in the profitability calculation, according to Terk.
And also i am getting the following status Pool 0 stratum+tcp://us.clevermining.com:3333 not responding!
i've had a few disconnects from the pool today too. i've had Cgminer up in an SSH terminal due to monitoring the Rejects and adjusting my intensity, i've seen it disconnect at least 4 times in the last hour.
im in the UK so perhaps this is a factor. please add me to the list of Euro users waiting for a local node.
I am not having disconnection problems and live in Italy, close enough to you!
I just started to use your pool since several hours. Like many other peoples I am not happy with the high rejection rate. Is there a way to see my 24h rejected avarage? I did only find the rejected rate for the last hour. This would be helpful to optimize my miner configuration.
1. My rejection Rate is very High bRejected: 83.9 kH/s (13.8%)
2. I am running Sapphire R9 280X. The cgminer show avg 728 KH/s where as on the website 631.7 kH/s 24-hour Average.
3. As per the website the BTC per day is 0.01218 BTC/day per MH/s.Based on this calculation the BTC/day for 700 KH/s must be .008526. However i have only 0.00565835 BTC. i e 34% less than pool profitability.
Please advise
How long are you using the pool? Expect at least a day before drawing conclusions. it is true that the percentage of rejected is still high but the values of profitability is not wrong!