Hi All,

I've seen alot of people mentioning that they have 13 GPU's up on this board, I have a question or two for those people.

 I've had this board for close to 6 months while only running with 7 RX580's, its been rock solid. Today I managed to get my grubby paws on 6 1070 ti's, but, I cannot get the board to see the 13th GPU, it always comes up with the 13th slot saying that there is an error detecting the card in it (it posts but slot B12 always comes up in error state on the post screen). I've tried different risers, usb cable, gen-1 pcie modules, even swapped the cards in that slot, but, it just wont see it.

Is there a specific slot order, or, placement of the amd/nvidia cards that needs to happen for this board to see all 13 gpu's?

At the moment, I have 7 x rx 580's plugged into PCIEX16_1 and slots A01 - A06, the nvidia 1070 ti's are plugged into slots B07 - B12, I'm just wondering if there is a specific slot order for nvidia/amd that needs to be done for it to detect all 13 gpu's.

How have you guys n gals plugged you amd/nvidia gpu's into your boards to get it to detect all 13 gpus?

Any thoughts / tips would be greatly appreciated.

Thanks for reading thus far.

https://preview.ibb.co/nMvZwS/phoenix_2_6.png

My reported hash rate matches the pool (MiningPoolHub), this is with phoenix v2.6

Have a look at the 1st post in this thread, he has a change log there and it will tell you what the changes are between 10.5 and 10.6.

@claymore
Any possibility you may consider doing a miner for x16r?

Interesting, I used the "-gser 5" to achieve the same thing, I must have missed this one in the readme file.

Hi All,

I'm trying to get Claymore v10.5 to display temperature/fan speeds while mining without actually controlling the trmps/fans. Reading the readme file it looks like all I need to do is specify "-tt 1" as a parameter, this does not work for me.

I then tried "-tt 1 -tstop 85" to see if it would start monitoring the temps and display them, but, no go.

I'm currently on Adrenaline 17.12.2 driver version, is anyone else having this issue, or, am I doing something silly?

Any assistance would be appreciated.

That looks like the OOM killer under linux, you need to see whats eating all your memory/swap on your box. Linux's OOM killer will nuke apps it deems uses most memory (simplistic explanation) just to keep the box running.

See here for a more in depth explanation.

You can disable it and/or increase your physical memory/swap.

Hope this helps.

Which miner are you using there on windows 10 to achieve 940H/s?

I cant get SGminer to work, it starts up but the cards don't seem to do any work (0H/s)

Ahh, no worries, I misunderstood you there.

I tried playing with the -h settings, where -h = 1152 (default), I get:


If I try to get claymore to use more memory, then the hash rate slows down:


How would you work out this "sweet spot", I think I need to do some more reading on the OP...

Looking at the image for the OverdriveNTool, it looks like you're getting 850H/s per card with those settings, but it looks like you mentioned you were getting 1152H/s above, was that a typo?

Oh balls, I'm running on Linux so I cannot use OverdriveNTool

I cannot get Claymore to set my gpu/memory clocks either, for some reason they do not apply

Multiple questions incoming

(a) How are you setting your clocks for core/gpu? Are you using claymore to set clocks or are you doing it with a BIOS mod.
(b) What straps are you using, are they the default PBE "one-click" straps, and is your Samsung/Hynix/Elpida/Micron memory?
(c) What gpu's are these?

1265/2250/65285/900/860

I have rx-580's and I get between 830-860H/s, it was an upgrade from 780-790H/s, but I cannot hit 900+ H/s with these RX-580 8GB cards (Hynix).

The cards I have are PowerColor Red Devil RX-580 Golden Sample 8GB, according to the dash-board in HiveOS, these two have Hynix memory.

I've currently got them mining Electroneum (CryptoNight) at the following rate:


This is with a modified bios which has the PBE one-click patch applied and then the bios modded to increase the memory clock to 2250MHz (I couldn't get the software (Claymore v11.0) to increase clocks for some reason it wouldn't apply (cclock/mclock), so had to do it in the bios)


@Mattthev is saying he has better straps so I'm guessing I need one of those straps to improve my hash rate.

I have 2 x PowerColor Red Devil RX-580 Golden Sample 8GB cards mining Electroneum with the following speeds with v11.0


If I'm not mistaken, I think I was getting around 780/790 H/s per card prior to the update.

BIOS moded with the following reported by rocm-smi:


Wish I could hit the 900+ H/s mark, but I'm not sure what else I could do to improve the speeds.

Where did you find these ones? Were they on amazon? My google-fu is failing me at the moment for this riser board locally.

Hi,

Any chance of upgrading the claymorex102 version to claymore cryptonote amd gpu miner v11.0?

On a side note, is anyone mining with sgminer on hiveos? I've tried a couple settings but i just cannot get the miner to actually start mining, I get 0 H/s with sgminer on hiveos.

Thank you for taking the time to do this, much appreciated!