Search content
Sort by
Showing 7 of 7 results by BWYeung
WOOT WOOT...I'm mining.
I had an Innosilicon tech remote into my system and got it running. He was able to determine my A4+ wasn't connecting to the internet correctly. The culprit was the Network Gateway; once he put in the correct one (router's IP address) into the gateway field, I started mining.
Hope this helps others who were having spinning Miner Status page like I was.
I had an Innosilicon tech remote into my system and got it running. He was able to determine my A4+ wasn't connecting to the internet correctly. The culprit was the Network Gateway; once he put in the correct one (router's IP address) into the gateway field, I started mining.
Hope this helps others who were having spinning Miner Status page like I was.
Thx Gazdac2
I rebooted and waited 5 min, then I telneted in ran the command, this is what I get.
I also did a test, ran the same command after another reboot (thx for the command) at about 30 sec after the start, when the fan speed reduced (just under 3min), and at 5 min. Prior to 5 min, I got the string of codes like yours with the pool information, but after 5 min, I get the same code as above.
I rebooted and waited 5 min, then I telneted in ran the command, this is what I get.
Code:
(none) login: root
Password:
root@miner~:
ps|grep innominer
844 root 0:00 syslogd -f /etc/syslog.conf -O /tmp/log/innominer.log -s 1
024 -b 5
1181 root 0:00 grep innominer
root@miner~:
Password:
root@miner~:
ps|grep innominer
844 root 0:00 syslogd -f /etc/syslog.conf -O /tmp/log/innominer.log -s 1
024 -b 5
1181 root 0:00 grep innominer
root@miner~:
I also did a test, ran the same command after another reboot (thx for the command) at about 30 sec after the start, when the fan speed reduced (just under 3min), and at 5 min. Prior to 5 min, I got the string of codes like yours with the pool information, but after 5 min, I get the same code as above.
Below is the debug log, I'm assuming this is not good.
For Newbies: I telnet in, and use the 1st and 3rd line to run the debug.
For Newbies: I telnet in, and use the 1st and 3rd line to run the debug.
Code:
cd /bin
root@miner/bin:
./innominer_T3 --debug
[1970-01-01 00:09:08] Started sgminer 4.4.2
[1970-01-01 00:09:08] A1 detect
[1970-01-01 00:09:08] hardware version is G19
[1970-01-01 00:09:08] miner type is T2
[ERRO:1970-01-01 00:09:08.331] set fan speed 80
[DEBG:1970-01-01 00:09:08.331] pwm name:/dev/pwmgen0.0.
[DEBG:1970-01-01 00:09:08.331] pwm step:5.
[DEBG:1970-01-01 00:09:08.331] duty max: 100.
[DEBG:1970-01-01 00:09:08.332] targ freq:20000.
[DEBG:1970-01-01 00:09:08.332] freq rate:20000.
[DEBG:1970-01-01 00:09:08.332] fan speed thrd:100.
[DEBG:1970-01-01 00:09:08.332] fan up thrd:55.
[DEBG:1970-01-01 00:09:08.332] fan down thrd:35.
[DEBG:1970-01-01 00:09:08.332] auto_fan true, fan_speed 1
[1970-01-01 00:09:58] A1: checking A1 chain 8,8,8,8,8,8,8,8
[1970-01-01 00:09:58] SPI '/dev/spidev0.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:09:59] SPI '/dev/spidev1.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:00] SPI '/dev/spidev2.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:01] SPI '/dev/spidev3.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:02] SPI '/dev/spidev4.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:03] SPI '/dev/spidev5.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:09] spi init
[1970-01-01 00:10:15] Plug Status[0] = 0
[1970-01-01 00:10:21] Plug Status[1] = 0
[1970-01-01 00:10:27] Plug Status[2] = 0
[1970-01-01 00:10:33] Plug Status[3] = 0
[1970-01-01 00:10:39] Plug Status[4] = 1
[1970-01-01 00:10:45] Plug Status[5] = 1
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
[1970-01-01 00:10:45] 0: A1 init chain
[1970-01-01 00:10:45] cmd bist start: poll fail !
[1970-01-01 00:10:45] bist start fail
[1970-01-01 00:10:45] init a1 chain fail
[1970-01-01 00:10:45] 1: A1 init chain
[1970-01-01 00:10:45] cmd bist start: poll fail !
[1970-01-01 00:10:45] bist start fail
[1970-01-01 00:10:45] init a1 chain fail
[1970-01-01 00:10:45] 2: A1 init chain
[1970-01-01 00:10:45] cmd bist start: poll fail !
[1970-01-01 00:10:45] bist start fail
[1970-01-01 00:10:45] init a1 chain fail
[1970-01-01 00:10:45] 3: A1 init chain
[1970-01-01 00:10:46] cmd bist start: poll fail !
[1970-01-01 00:10:46] bist start fail
[1970-01-01 00:10:46] init a1 chain fail
[1970-01-01 00:10:46] 4: A1 init chain
[1970-01-01 00:10:46] cmd bist start: poll fail !
[1970-01-01 00:10:46] bist start fail
[1970-01-01 00:10:46] init a1 chain fail
[1970-01-01 00:10:46] 5: A1 init chain
[1970-01-01 00:10:46] cmd bist start: poll fail !
[1970-01-01 00:10:46] bist start fail
[1970-01-01 00:10:46] init a1 chain fail
[1970-01-01 00:10:46] pre init_pll...
[ERRO:1970-01-01 00:10:46.789] set fan speed 30
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] reload init a1 chain0 fail
[1970-01-01 00:10:46] reload init a1 chain1 fail
[1970-01-01 00:10:46] reload init a1 chain2 fail
[1970-01-01 00:10:46] reload init a1 chain3 fail
[1970-01-01 00:10:46] reload init a1 chain4 fail
[1970-01-01 00:10:46] reload init a1 chain5 fail
[1970-01-01 00:10:46] A1 dectect finish
[1970-01-01 00:10:46] All devices disabled, cannot mine!
root@miner/bin:
root@miner/bin:
./innominer_T3 --debug
[1970-01-01 00:09:08] Started sgminer 4.4.2
[1970-01-01 00:09:08] A1 detect
[1970-01-01 00:09:08] hardware version is G19
[1970-01-01 00:09:08] miner type is T2
[ERRO:1970-01-01 00:09:08.331] set fan speed 80
[DEBG:1970-01-01 00:09:08.331] pwm name:/dev/pwmgen0.0.
[DEBG:1970-01-01 00:09:08.331] pwm step:5.
[DEBG:1970-01-01 00:09:08.331] duty max: 100.
[DEBG:1970-01-01 00:09:08.332] targ freq:20000.
[DEBG:1970-01-01 00:09:08.332] freq rate:20000.
[DEBG:1970-01-01 00:09:08.332] fan speed thrd:100.
[DEBG:1970-01-01 00:09:08.332] fan up thrd:55.
[DEBG:1970-01-01 00:09:08.332] fan down thrd:35.
[DEBG:1970-01-01 00:09:08.332] auto_fan true, fan_speed 1
[1970-01-01 00:09:58] A1: checking A1 chain 8,8,8,8,8,8,8,8
[1970-01-01 00:09:58] SPI '/dev/spidev0.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:09:59] SPI '/dev/spidev1.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:00] SPI '/dev/spidev2.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:01] SPI '/dev/spidev3.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:02] SPI '/dev/spidev4.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:03] SPI '/dev/spidev5.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:09] spi init
[1970-01-01 00:10:15] Plug Status[0] = 0
[1970-01-01 00:10:21] Plug Status[1] = 0
[1970-01-01 00:10:27] Plug Status[2] = 0
[1970-01-01 00:10:33] Plug Status[3] = 0
[1970-01-01 00:10:39] Plug Status[4] = 1
[1970-01-01 00:10:45] Plug Status[5] = 1
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
[1970-01-01 00:10:45] 0: A1 init chain
[1970-01-01 00:10:45] cmd bist start: poll fail !
[1970-01-01 00:10:45] bist start fail
[1970-01-01 00:10:45] init a1 chain fail
[1970-01-01 00:10:45] 1: A1 init chain
[1970-01-01 00:10:45] cmd bist start: poll fail !
[1970-01-01 00:10:45] bist start fail
[1970-01-01 00:10:45] init a1 chain fail
[1970-01-01 00:10:45] 2: A1 init chain
[1970-01-01 00:10:45] cmd bist start: poll fail !
[1970-01-01 00:10:45] bist start fail
[1970-01-01 00:10:45] init a1 chain fail
[1970-01-01 00:10:45] 3: A1 init chain
[1970-01-01 00:10:46] cmd bist start: poll fail !
[1970-01-01 00:10:46] bist start fail
[1970-01-01 00:10:46] init a1 chain fail
[1970-01-01 00:10:46] 4: A1 init chain
[1970-01-01 00:10:46] cmd bist start: poll fail !
[1970-01-01 00:10:46] bist start fail
[1970-01-01 00:10:46] init a1 chain fail
[1970-01-01 00:10:46] 5: A1 init chain
[1970-01-01 00:10:46] cmd bist start: poll fail !
[1970-01-01 00:10:46] bist start fail
[1970-01-01 00:10:46] init a1 chain fail
[1970-01-01 00:10:46] pre init_pll...
[ERRO:1970-01-01 00:10:46.789] set fan speed 30
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] reload init a1 chain0 fail
[1970-01-01 00:10:46] reload init a1 chain1 fail
[1970-01-01 00:10:46] reload init a1 chain2 fail
[1970-01-01 00:10:46] reload init a1 chain3 fail
[1970-01-01 00:10:46] reload init a1 chain4 fail
[1970-01-01 00:10:46] reload init a1 chain5 fail
[1970-01-01 00:10:46] A1 dectect finish
[1970-01-01 00:10:46] All devices disabled, cannot mine!
root@miner/bin:
Code:
cd /bin
root@miner/bin:
./innominer_T3 --debug
[1970-01-01 00:09:08] Started sgminer 4.4.2
[1970-01-01 00:09:08] A1 detect
[1970-01-01 00:09:08] hardware version is G19
[1970-01-01 00:09:08] miner type is T2
[ERRO:1970-01-01 00:09:08.331] set fan speed 80
[DEBG:1970-01-01 00:09:08.331] pwm name:/dev/pwmgen0.0.
[DEBG:1970-01-01 00:09:08.331] pwm step:5.
[DEBG:1970-01-01 00:09:08.331] duty max: 100.
[DEBG:1970-01-01 00:09:08.332] targ freq:20000.
[DEBG:1970-01-01 00:09:08.332] freq rate:20000.
[DEBG:1970-01-01 00:09:08.332] fan speed thrd:100.
[DEBG:1970-01-01 00:09:08.332] fan up thrd:55.
[DEBG:1970-01-01 00:09:08.332] fan down thrd:35.
[DEBG:1970-01-01 00:09:08.332] auto_fan true, fan_speed 1
[1970-01-01 00:09:58] A1: checking A1 chain 8,8,8,8,8,8,8,8
[1970-01-01 00:09:58] SPI '/dev/spidev0.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:09:59] SPI '/dev/spidev1.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:00] SPI '/dev/spidev2.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:01] SPI '/dev/spidev3.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:02] SPI '/dev/spidev4.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:03] SPI '/dev/spidev5.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:09] spi init
[1970-01-01 00:10:15] Plug Status[0] = 0
[1970-01-01 00:10:21] Plug Status[1] = 0
[1970-01-01 00:10:27] Plug Status[2] = 0
[1970-01-01 00:10:33] Plug Status[3] = 0
[1970-01-01 00:10:39] Plug Status[4] = 1
[1970-01-01 00:10:45] Plug Status[5] = 1
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
[1970-01-01 00:10:45] 0: A1 init chain
[1970-01-01 00:10:45] cmd bist start: poll fail !
[1970-01-01 00:10:45] bist start fail
[1970-01-01 00:10:45] init a1 chain fail
[1970-01-01 00:10:45] 1: A1 init chain
[1970-01-01 00:10:45] cmd bist start: poll fail !
[1970-01-01 00:10:45] bist start fail
[1970-01-01 00:10:45] init a1 chain fail
[1970-01-01 00:10:45] 2: A1 init chain
[1970-01-01 00:10:45] cmd bist start: poll fail !
[1970-01-01 00:10:45] bist start fail
[1970-01-01 00:10:45] init a1 chain fail
[1970-01-01 00:10:45] 3: A1 init chain
[1970-01-01 00:10:46] cmd bist start: poll fail !
[1970-01-01 00:10:46] bist start fail
[1970-01-01 00:10:46] init a1 chain fail
[1970-01-01 00:10:46] 4: A1 init chain
[1970-01-01 00:10:46] cmd bist start: poll fail !
[1970-01-01 00:10:46] bist start fail
[1970-01-01 00:10:46] init a1 chain fail
[1970-01-01 00:10:46] 5: A1 init chain
[1970-01-01 00:10:46] cmd bist start: poll fail !
[1970-01-01 00:10:46] bist start fail
[1970-01-01 00:10:46] init a1 chain fail
[1970-01-01 00:10:46] pre init_pll...
[ERRO:1970-01-01 00:10:46.789] set fan speed 30
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] reload init a1 chain0 fail
[1970-01-01 00:10:46] reload init a1 chain1 fail
[1970-01-01 00:10:46] reload init a1 chain2 fail
[1970-01-01 00:10:46] reload init a1 chain3 fail
[1970-01-01 00:10:46] reload init a1 chain4 fail
[1970-01-01 00:10:46] reload init a1 chain5 fail
[1970-01-01 00:10:46] A1 dectect finish
[1970-01-01 00:10:46] All devices disabled, cannot mine!
root@miner/bin:
[/s]root@miner/bin:
./innominer_T3 --debug
[1970-01-01 00:09:08] Started sgminer 4.4.2
[1970-01-01 00:09:08] A1 detect
[1970-01-01 00:09:08] hardware version is G19
[1970-01-01 00:09:08] miner type is T2
[ERRO:1970-01-01 00:09:08.331] set fan speed 80
[DEBG:1970-01-01 00:09:08.331] pwm name:/dev/pwmgen0.0.
[DEBG:1970-01-01 00:09:08.331] pwm step:5.
[DEBG:1970-01-01 00:09:08.331] duty max: 100.
[DEBG:1970-01-01 00:09:08.332] targ freq:20000.
[DEBG:1970-01-01 00:09:08.332] freq rate:20000.
[DEBG:1970-01-01 00:09:08.332] fan speed thrd:100.
[DEBG:1970-01-01 00:09:08.332] fan up thrd:55.
[DEBG:1970-01-01 00:09:08.332] fan down thrd:35.
[DEBG:1970-01-01 00:09:08.332] auto_fan true, fan_speed 1
[1970-01-01 00:09:58] A1: checking A1 chain 8,8,8,8,8,8,8,8
[1970-01-01 00:09:58] SPI '/dev/spidev0.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:09:59] SPI '/dev/spidev1.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:00] SPI '/dev/spidev2.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:01] SPI '/dev/spidev3.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:02] SPI '/dev/spidev4.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:03] SPI '/dev/spidev5.0': mode=1, bits=8, speed=1500000
[1970-01-01 00:10:09] spi init
[1970-01-01 00:10:15] Plug Status[0] = 0
[1970-01-01 00:10:21] Plug Status[1] = 0
[1970-01-01 00:10:27] Plug Status[2] = 0
[1970-01-01 00:10:33] Plug Status[3] = 0
[1970-01-01 00:10:39] Plug Status[4] = 1
[1970-01-01 00:10:45] Plug Status[5] = 1
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
set_vid_value_G19:8.
[1970-01-01 00:10:45] 0: A1 init chain
[1970-01-01 00:10:45] cmd bist start: poll fail !
[1970-01-01 00:10:45] bist start fail
[1970-01-01 00:10:45] init a1 chain fail
[1970-01-01 00:10:45] 1: A1 init chain
[1970-01-01 00:10:45] cmd bist start: poll fail !
[1970-01-01 00:10:45] bist start fail
[1970-01-01 00:10:45] init a1 chain fail
[1970-01-01 00:10:45] 2: A1 init chain
[1970-01-01 00:10:45] cmd bist start: poll fail !
[1970-01-01 00:10:45] bist start fail
[1970-01-01 00:10:45] init a1 chain fail
[1970-01-01 00:10:45] 3: A1 init chain
[1970-01-01 00:10:46] cmd bist start: poll fail !
[1970-01-01 00:10:46] bist start fail
[1970-01-01 00:10:46] init a1 chain fail
[1970-01-01 00:10:46] 4: A1 init chain
[1970-01-01 00:10:46] cmd bist start: poll fail !
[1970-01-01 00:10:46] bist start fail
[1970-01-01 00:10:46] init a1 chain fail
[1970-01-01 00:10:46] 5: A1 init chain
[1970-01-01 00:10:46] cmd bist start: poll fail !
[1970-01-01 00:10:46] bist start fail
[1970-01-01 00:10:46] init a1 chain fail
[1970-01-01 00:10:46] pre init_pll...
[ERRO:1970-01-01 00:10:46.789] set fan speed 30
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 120 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 320 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 520 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 720 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 920 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] pll 1120 finished
[1970-01-01 00:10:46] reload init a1 chain0 fail
[1970-01-01 00:10:46] reload init a1 chain1 fail
[1970-01-01 00:10:46] reload init a1 chain2 fail
[1970-01-01 00:10:46] reload init a1 chain3 fail
[1970-01-01 00:10:46] reload init a1 chain4 fail
[1970-01-01 00:10:46] reload init a1 chain5 fail
[1970-01-01 00:10:46] A1 dectect finish
[1970-01-01 00:10:46] All devices disabled, cannot mine!
root@miner/bin:
Edit: So my issues weren't hardware, mine was network config issue. My Network Gateway wasn't right, so I wasn't getting to the net.
Same here miner status is constantly loading.. no hash rate showed at the pool. Tried to upgrade the software but it stops at 10% and when u refresh the page its gone.
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
What's your System Version info, mine are:
Miner Type: 17
Hw Version: G19
Build Date: Thur Dec 21 17:56:17 CST 2017
Platform Version: 810e0c2934044ec019b1d929d3de1f3c899b6410
Rootfs Version: 4973e48bd7ab0bb58688ce4845bd7b2b532429f7
Mine is the same 17 and G19 just the date is 29 dec instead
I'm on the same Build Date as you, found the 17-12-29 build off the support site. The good thing now, it doesn't sound like a drone trying to take off.
Weird thing, on their support site, their screenshots shows "Cgminer Version" "Sgminer Version" mine does not, does yours? Same here miner status is constantly loading.. no hash rate showed at the pool. Tried to upgrade the software but it stops at 10% and when u refresh the page its gone.
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
What's your System Version info, mine are:
Miner Type: 17
Hw Version: G19
Build Date: Thur Dec 21 17:56:17 CST 2017
Platform Version: 810e0c2934044ec019b1d929d3de1f3c899b6410
Rootfs Version: 4973e48bd7ab0bb58688ce4845bd7b2b532429f7
New Miner - just got the Innosilicon A4+ LTC Master hooked up to a Bitmain APW3++ (110) and plugged directly into my AT&T Uverse Modem/Router. I've followed the direction from the OP, (upgraded firmware, enter my pool info - Litecoinpool) I have not gone into the Advance Config and change the inno_config.py file. I've also enabled pass through the AT&T modem/router for litecoinpool's ports-TCP 3333 & 8080), been running for over 2 hours. I did have to change the A4+'s IP as it was the same as the modem/router.
Question: How do I know if I'm connected and mining in the pool? Issues, Miner Status Overview does not show me anything, I get the spinning flower fore Summery, InnoMiner, and Pools. Also, my litecoinpool accounts page shows all zeros, if connect, when should you start seeing data?
TIA.
EDIT: Using latest firmware as it works with the Dec 22 Password.
Question: How do I know if I'm connected and mining in the pool? Issues, Miner Status Overview does not show me anything, I get the spinning flower fore Summery, InnoMiner, and Pools. Also, my litecoinpool accounts page shows all zeros, if connect, when should you start seeing data?
TIA.
EDIT: Using latest firmware as it works with the Dec 22 Password.