===========================================Miner log===========================================
1970-01-01 00:00:10 Miner compile time: Thu Nov 26 17:54:48 CST 2020 type: Antminer S19
1970-01-01 00:00:11 This is fix-freq version
1970-01-01 00:00:11 Miner compile time: Thu Nov 26 17:54:48 CST 2020 type: Antminer S19
1970-01-01 00:00:11 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2020-11-26 18:05:56
1970-01-01 00:00:11 opt_multi_version     = 1
1970-01-01 00:00:11 opt_bitmain_ab        = 1
1970-01-01 00:00:11 mid_auto_gen          = 0
1970-01-01 00:00:11 opt_bitmain_work_mode = 0
1970-01-01 00:00:11 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:11 Cannot Find Any Plug In!
1970-01-01 00:00:11 Note: front fan is power on!
1970-01-01 00:00:11 Note: rear fan is power on!
1970-01-01 00:00:11 start the http log.
1970-01-01 00:00:11 httpListenThread start ret=0
1970-01-01 00:00:11 start listen on 6060 ...
1970-01-01 00:00:11 load machine NBS1902 conf
1970-01-01 00:00:11 machine : NBS1902
1970-01-01 00:00:11 chain_num 4, chain_domain_num 38, chain_asic_num 76, domain_asic_num 2
1970-01-01 00:00:17 miner ID : 8110744a5cfaa85c
1970-01-01 00:00:17 FPGA Version = 0xB031
1970-01-01 00:00:17 Cannot Find Any Plug In!
1970-01-01 00:00:17 ==========================capability start==========================
1970-01-01 00:00:17 board num = 0
1970-01-01 00:00:17 ==========================capability end============================
1970-01-01 00:00:17 No chain exist, exit.
1970-01-01 00:00:17 ERROR_SOC_INIT: basic init failed!
1970-01-01 00:00:17 stop_mining: basic init failed!
1970-01-01 00:00:17 ****power off hashboard****
1970-01-01 00:00:18 fan_eft : 0  fan_pwm : 100
1970-01-01 00:00:18 create thread
1970-01-01 00:00:18 fixed working voltage = -1
1970-01-01 00:00:09 Miner compile time: Thu Nov 26 17:54:48 CST 2020 type: Antminer S19
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Thu Nov 26 17:54:48 CST 2020 type: Antminer S19
1970-01-01 00:00:10 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2020-11-26 18:05:56
1970-01-01 00:00:10 opt_multi_version     = 1
FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-08-16 19:48:54
2021-08-16 19:48:54 fan_eft : 0  fan_pwm : 100
2021-08-16 19:48:54 create thread
2021-08-16 19:48:54 fixed working voltage = 1380
2021-08-16 19:48:54 Chain [0] PCB Version: 0x0146
2021-08-16 19:48:54 Chain [0] BOM Version: 0x0100
2021-08-16 19:48:54 Chain [1] PCB Version: 0x0146
2021-08-16 19:48:54 Chain [1] BOM Version: 0x0100
2021-08-16 19:48:54 Chain [2] PCB Version: 0x0146
2021-08-16 19:48:54 Chain [2] BOM Version: 0x0100
2021-08-16 19:48:58 Fan check passed.
2021-08-16 19:48:59 chain[0] PIC jump to app
2021-08-16 19:49:01 Check chain[0] PIC fw version=0x89
2021-08-16 19:49:02 chain[1] PIC jump to app
2021-08-16 19:49:03 Check chain[1] PIC fw version=0x89
2021-08-16 19:49:05 chain[2] PIC jump to app
2021-08-16 19:49:06 Check chain[2] PIC fw version=0x89
2021-08-16 19:49:06 create thread
2021-08-16 19:49:06 max sensor num = 4
2021-08-16 19:49:06 temperature_monitor_thread start...
2021-08-16 19:49:10 power type version: 0x0071
2021-08-16 19:49:10 Enter sleep to make sure power release finish.
2021-08-16 19:50:01 Slept 50 seconds, diff = 5.
2021-08-16 19:50:01 set_voltage_by_steps to 1500.
2021-08-16 19:50:05 chain avg vol rise to 10.34
2021-08-16 19:50:07 start up min temp by 75a = 26
2021-08-16 19:50:07 set UART baud to 115200
2021-08-16 19:50:15 Chain[0]: find 76 asic, times 0
2021-08-16 19:50:18 chain avg vol rise to 15.27
2021-08-16 19:50:23 Chain[1]: find 76 asic, times 0
2021-08-16 19:50:30 Chain[2]: find 76 asic, times 0
2021-08-16 19:50:30 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 0
2021-08-16 19:50:33 min freq in eeprom = 675
2021-08-16 19:50:33 fixed frequency is 675
2021-08-16 19:50:33 Bring up temperature is 26
2021-08-16 19:50:34 set UART baud to 12000000
2021-08-16 19:50:34 set_voltage_by_steps to 1380.
2021-08-16 19:50:41 STATUS_INITED: soc init done!
2021-08-16 19:50:41 create thread
2021-08-16 19:50:41 create thread
2021-08-16 19:50:43 start to init...
2021-08-16 19:50:54 Init done!
2021-08-16 19:50:54 STATUS_OKAY
2021-08-16 19:50:54 start the cached job
2021-08-16 19:50:54 Version num 8
2021-08-16 19:50:54 Mask num 0xe000
2021-08-16 19:50:54 freq = 675, percent = 90, hcn = 14560, timeout = 524
2021-08-16 19:50:54 set_start_time_point total_tv_start_sys=143 total_tv_end_sys=144
1970-01-01 00:00:09 Miner compile time: Sun Apr 11 20:35:33 CST 2021 type: Antminer S19
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Sun Apr 11 20:35:33 CST 2021 type: Antminer S19
1970-01-01 00:00:10 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2021-04-11 20:47:52
1970-01-01 00:00:10 opt_multi_version     = 1
1970-01-01 00:00:10 opt_bitmain_ab        = 1
1970-01-01 00:00:10 mid_auto_gen          = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine NBS1902 conf
1970-01-01 00:00:10 machine : NBS1902
1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 76, domain_asic_num 2
1970-01-01 00:00:16 miner ID : 8110744a5cfaa85c
1970-01-01 00:00:16 FPGA Version = 0xB031
1970-01-01 00:00:16 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:16 ==========================capability start==========================
1970-01-01 00:00:16 board num = 3
1970-01-01 00:00:16 board id = 0, chain num = 1
1970-01-01 00:00:16 chain id = 0
1970-01-01 00:00:16 board id = 1, chain num = 1
1970-01-01 00:00:16 chain id = 1
1970-01-01 00:00:16 board id = 2, chain num = 1
1970-01-01 00:00:16 chain id = 2
1970-01-01 00:00:16 ==========================capability end============================
1970-01-01 00:00:16 chain num = 3
1970-01-01 00:00:18 [chain 0]
1970-01-01 00:00:18 0x0000 11 4A C0 ED E7 1E A9 37   9B FA 06 AB 2C 92 27 59
1970-01-01 00:00:18 0x0010 D1 F5 3C 3F 03 AA 69 C1   BA 11 C5 4C C4 15 FB 98
1970-01-01 00:00:18 0x0020 C0 31 D0 00 E1 F3 BB 33   9F EE BA 6C AF 9B 0B E7
1970-01-01 00:00:18 0x0030 7A 8C 9D 50 15 B1 8F 48   EB 0E 98 BA 93 C4 79 A0
1970-01-01 00:00:18 0x0040 E0 E7 AC 03 EA BA 4D 8D   9E DF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
1970-01-01 00:00:18
1970-01-01 00:00:20 [chain 1]
1970-01-01 00:00:20 0x0000 11 4A 39 CB AD DC E4 B9   FB 53 13 87 9C BA DF DC
1970-01-01 00:00:20 0x0010 55 98 3C A9 82 F7 43 4B   4F C3 70 58 3A 61 F9 D5
1970-01-01 00:00:20 0x0020 27 A8 BE 6E E6 9D 24 2A   42 D1 18 F1 B5 89 E5 74
1970-01-01 00:00:20 0x0030 78 58 A7 0D 20 F4 C3 0B   F2 25 78 D3 7E B8 CC 46
1970-01-01 00:00:20 0x0040 C8 77 83 7C 95 4D 57 C1   6B D4 FF FF FF FF FF FF
1970-01-01 00:00:20 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
1970-01-01 00:00:20
2021-08-16 20:14:04 [chain 2]
2021-08-16 20:14:04 0x0000 11 4A 3B F5 A7 1D 0C 21   5A 8F 5D 8D 0A 12 69 9F
2021-08-16 20:14:04 0x0010 FA 47 36 4E 23 6B 0A 10   D8 5F ED 3A A7 AD 9A 9A
2021-08-16 20:14:04 0x0020 13 A1 0D 3E 15 6B 14 51   F7 80 AA DF F8 CE D6 C8
2021-08-16 20:14:04 0x0030 86 80 BD 68 78 55 DA 78   C4 AC A1 0C 96 FE E1 88
2021-08-16 20:14:04 0x0040 2D 09 A3 EA AE 0E E9 FA   5B 53 FF FF FF FF FF FF
2021-08-16 20:14:04 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:14:04 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:14:04 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:14:04 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:14:04 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:14:04 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:14:04 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:14:04 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:14:04 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:14:04 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:14:04 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-08-16 20:14:04
2021-08-16 20:14:04 fan_eft : 0  fan_pwm : 100
2021-08-16 20:14:04 create thread
2021-08-16 20:14:04 fixed working voltage = 1380
2021-08-16 20:14:04 Chain [0] PCB Version: 0x0146
2021-08-16 20:14:04 Chain [0] BOM Version: 0x0100
2021-08-16 20:14:04 Chain [1] PCB Version: 0x0146
2021-08-16 20:14:04 Chain [1] BOM Version: 0x0100
2021-08-16 20:14:04 Chain [2] PCB Version: 0x0146
2021-08-16 20:14:04 Chain [2] BOM Version: 0x0100
2021-08-16 20:14:08 Fan check passed.
2021-08-16 20:14:09 chain[0] PIC jump to app
2021-08-16 20:14:11 Check chain[0] PIC fw version=0x89
2021-08-16 20:14:12 chain[1] PIC jump to app
2021-08-16 20:14:13 Check chain[1] PIC fw version=0x89
2021-08-16 20:14:14 chain[2] PIC jump to app
2021-08-16 20:14:16 Check chain[2] PIC fw version=0x89
2021-08-16 20:14:16 create thread
2021-08-16 20:14:16 max sensor num = 4
2021-08-16 20:14:16 temperature_monitor_thread start...
2021-08-16 20:14:20 power type version: 0x0071
2021-08-16 20:14:20 Enter sleep to make sure power release finish.
2021-08-16 20:15:20 Slept 59 seconds, diff = 5.
2021-08-16 20:15:20 set_voltage_by_steps to 1500.
2021-08-16 20:15:26 start up min temp by 75a = 26
2021-08-16 20:15:26 set UART baud to 115200
2021-08-16 20:15:28 chain avg vol rise to 15.29
2021-08-16 20:15:34 Chain[0]: find 76 asic, times 0
2021-08-16 20:15:42 Chain[1]: find 76 asic, times 0
2021-08-16 20:15:49 Chain[2]: find 76 asic, times 0
2021-08-16 20:15:49 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 0
2021-08-16 20:15:53 min freq in eeprom = 675
2021-08-16 20:15:53 fixed frequency is 675
2021-08-16 20:15:53 Bring up temperature is 26
2021-08-16 20:15:53 set UART baud to 12000000
2021-08-16 20:15:53 set_voltage_by_steps to 1380.
2021-08-16 20:16:00 STATUS_INITED: soc init done!
2021-08-16 20:16:00 create thread
2021-08-16 20:16:00 create thread
2021-08-16 20:16:03 start to init...
2021-08-16 20:16:14 Init done!
2021-08-16 20:16:14 STATUS_OKAY
2021-08-16 20:16:14 start the cached job
2021-08-16 20:16:14 Version num 8
2021-08-16 20:16:14 Mask num 0xe000
2021-08-16 20:16:14 freq = 675, percent = 90, hcn = 14560, timeout = 524
2021-08-16 20:16:14 set_start_time_point total_tv_start_sys=153 total_tv_end_sys=154
1970-01-01 00:00:10 Miner compile time: Sun Apr 11 20:36:08 CST 2021 type: Antminer S19
1970-01-01 00:00:11 This is fix-freq version
1970-01-01 00:00:11 Miner compile time: Sun Apr 11 20:36:08 CST 2021 type: Antminer S19
1970-01-01 00:00:11 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2021-04-11 20:48:35
1970-01-01 00:00:11 opt_multi_version     = 1
1970-01-01 00:00:11 opt_bitmain_ab        = 1
1970-01-01 00:00:11 mid_auto_gen          = 0
1970-01-01 00:00:11 opt_bitmain_work_mode = 0
1970-01-01 00:00:11 mmap fpga_mem_addr_hal = 0xb5700000
1970-01-01 00:00:11 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:11 Note: front fan is power on!
1970-01-01 00:00:11 Note: rear fan is power on!
1970-01-01 00:00:11 start the http log.
1970-01-01 00:00:11 httpListenThread start ret=0
1970-01-01 00:00:11 start listen on 6060 ...
1970-01-01 00:00:11 load machine NBS1902 conf
1970-01-01 00:00:11 machine : NBS1902
1970-01-01 00:00:11 chain_num 4, chain_domain_num 38, chain_asic_num 76, domain_asic_num 2
1970-01-01 00:00:17 miner ID : 8110744a5cfaa85c
1970-01-01 00:00:17 FPGA Version = 0xB031
1970-01-01 00:00:17 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:17 ==========================capability start==========================
1970-01-01 00:00:17 board num = 3
1970-01-01 00:00:17 board id = 0, chain num = 1
1970-01-01 00:00:17 chain id = 0
1970-01-01 00:00:17 board id = 1, chain num = 1
1970-01-01 00:00:17 chain id = 1
1970-01-01 00:00:17 board id = 2, chain num = 1
1970-01-01 00:00:17 chain id = 2
1970-01-01 00:00:17 ==========================capability end============================
1970-01-01 00:00:17 chain num = 3
1970-01-01 00:00:18 [chain 0]
1970-01-01 00:00:18 0x0000 11 4A C0 ED E7 1E A9 37   9B FA 06 AB 2C 92 27 59
1970-01-01 00:00:18 0x0010 D1 F5 3C 3F 03 AA 69 C1   BA 11 C5 4C C4 15 FB 98
1970-01-01 00:00:18 0x0020 C0 31 D0 00 E1 F3 BB 33   9F EE BA 6C AF 9B 0B E7
1970-01-01 00:00:18 0x0030 7A 8C 9D 50 15 B1 8F 48   EB 0E 98 BA 93 C4 79 A0
1970-01-01 00:00:18 0x0040 E0 E7 AC 03 EA BA 4D 8D   9E DF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
1970-01-01 00:00:18
1970-01-01 00:00:20 [chain 1]
1970-01-01 00:00:20 0x0000 11 4A 39 CB AD DC E4 B9   FB 53 13 87 9C BA DF DC
1970-01-01 00:00:20 0x0010 55 98 3C A9 82 F7 43 4B   4F C3 70 58 3A 61 F9 D5
1970-01-01 00:00:20 0x0020 27 A8 BE 6E E6 9D 24 2A   42 D1 18 F1 B5 89 E5 74
1970-01-01 00:00:20 0x0030 78 58 A7 0D 20 F4 C3 0B   F2 25 78 D3 7E B8 CC 46
1970-01-01 00:00:20 0x0040 C8 77 83 7C 95 4D 57 C1   6B D4 FF FF FF FF FF FF
1970-01-01 00:00:20 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
1970-01-01 00:00:20
2021-08-16 20:45:51 [chain 2]
2021-08-16 20:45:51 0x0000 11 4A 3B F5 A7 1D 0C 21   5A 8F 5D 8D 0A 12 69 9F
2021-08-16 20:45:51 0x0010 FA 47 36 4E 23 6B 0A 10   D8 5F ED 3A A7 AD 9A 9A
2021-08-16 20:45:51 0x0020 13 A1 0D 3E 15 6B 14 51   F7 80 AA DF F8 CE D6 C8
2021-08-16 20:45:51 0x0030 86 80 BD 68 78 55 DA 78   C4 AC A1 0C 96 FE E1 88
2021-08-16 20:45:51 0x0040 2D 09 A3 EA AE 0E E9 FA   5B 53 FF FF FF FF FF FF
2021-08-16 20:45:51 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:45:51 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:45:51 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:45:51 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:45:51 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:45:51 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:45:51 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:45:51 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:45:51 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:45:51 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-08-16 20:45:51 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-08-16 20:45:51
2021-08-16 20:45:51 fan_eft : 0  fan_pwm : 100
2021-08-16 20:45:51 create thread
2021-08-16 20:45:51 fixed working voltage = 1380
2021-08-16 20:45:51 Chain [0] PCB Version: 0x0146
2021-08-16 20:45:51 Chain [0] BOM Version: 0x0100
2021-08-16 20:45:51 Chain [1] PCB Version: 0x0146
2021-08-16 20:45:51 Chain [1] BOM Version: 0x0100
2021-08-16 20:45:51 Chain [2] PCB Version: 0x0146
2021-08-16 20:45:51 Chain [2] BOM Version: 0x0100
2021-08-16 20:45:55 Fan check passed.
2021-08-16 20:45:56 chain[0] PIC jump to app
2021-08-16 20:45:57 Check chain[0] PIC fw version=0x89
2021-08-16 20:45:58 chain[1] PIC jump to app
2021-08-16 20:46:00 Check chain[1] PIC fw version=0x89
2021-08-16 20:46:01 chain[2] PIC jump to app
2021-08-16 20:46:02 Check chain[2] PIC fw version=0x89
2021-08-16 20:46:03 create thread
2021-08-16 20:46:03 max sensor num = 4
2021-08-16 20:46:03 temperature_monitor_thread start...
2021-08-16 20:46:07 power type version: 0x0071
2021-08-16 20:46:07 Enter sleep to make sure power release finish.
2021-08-16 20:46:58 Slept 50 seconds, diff = 5.
2021-08-16 20:46:58 set_voltage_by_steps to 1500.
2021-08-16 20:47:01 chain avg vol rise to 10.38
2021-08-16 20:47:03 start up min temp by 75a = 26
2021-08-16 20:47:03 set UART baud to 115200
2021-08-16 20:47:11 Chain[0]: find 76 asic, times 0
2021-08-16 20:47:14 chain avg vol rise to 15.27
2021-08-16 20:47:19 Chain[1]: find 76 asic, times 0
2021-08-16 20:47:27 Chain[2]: find 76 asic, times 0
2021-08-16 20:47:27 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 0
2021-08-16 20:47:30 min freq in eeprom = 675
2021-08-16 20:47:30 fixed frequency is 675
2021-08-16 20:47:30 Bring up temperature is 26
2021-08-16 20:47:30 set UART baud to 12000000
2021-08-16 20:47:30 set_voltage_by_steps to 1380.
2021-08-16 20:47:37 STATUS_INITED: soc init done!
2021-08-16 20:47:37 create thread
2021-08-16 20:47:37 create thread
2021-08-16 20:52:38 WARN_NET_LOST: network connection lost
2021-08-16 20:52:38 will power off in 241 seconds in case not resume
1970-01-01 00:00:09 Miner compile time: Sun Apr 11 20:36:08 CST 2021 type: Antminer S19
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Sun Apr 11 20:36:08 CST 2021 type: Antminer S19
1970-01-01 00:00:10 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2021-04-11 20:48:35
1970-01-01 00:00:10 opt_multi_version     = 1
1970-01-01 00:00:10 opt_bitmain_ab        = 1
1970-01-01 00:00:10 mid_auto_gen          = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5900000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine NBS1902 conf
1970-01-01 00:00:10 machine : NBS1902
1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 76, domain_asic_num 2
1970-01-01 00:00:16 miner ID : 8110744a5cfaa85c
1970-01-01 00:00:16 FPGA Version = 0xB031
1970-01-01 00:00:16 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:16 ==========================capability start==========================
1970-01-01 00:00:16 board num = 3
1970-01-01 00:00:16 board id = 0, chain num = 1
1970-01-01 00:00:16 chain id = 0
1970-01-01 00:00:16 board id = 1, chain num = 1
1970-01-01 00:00:16 chain id = 1
1970-01-01 00:00:16 board id = 2, chain num = 1
1970-01-01 00:00:16 chain id = 2
1970-01-01 00:00:16 ==========================capability end============================
1970-01-01 00:00:16 chain num = 3
1970-01-01 00:00:18 [chain 0]
1970-01-01 00:00:18 0x0000 11 4A C0 ED E7 1E A9 37   9B FA 06 AB 2C 92 27 59
1970-01-01 00:00:18 0x0010 D1 F5 3C 3F 03 AA 69 C1   BA 11 C5 4C C4 15 FB 98
1970-01-01 00:00:18 0x0020 C0 31 D0 00 E1 F3 BB 33   9F EE BA 6C AF 9B 0B E7
1970-01-01 00:00:18 0x0030 7A 8C 9D 50 15 B1 8F 48   EB 0E 98 BA 93 C4 79 A0
1970-01-01 00:00:18 0x0040 E0 E7 AC 03 EA BA 4D 8D   9E DF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:18 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
1970-01-01 00:00:18
1970-01-01 00:00:20 [chain 1]
1970-01-01 00:00:20 0x0000 11 4A 39 CB AD DC E4 B9   FB 53 13 87 9C BA DF DC
1970-01-01 00:00:20 0x0010 55 98 3C A9 82 F7 43 4B   4F C3 70 58 3A 61 F9 D5
1970-01-01 00:00:20 0x0020 27 A8 BE 6E E6 9D 24 2A   42 D1 18 F1 B5 89 E5 74
1970-01-01 00:00:20 0x0030 78 58 A7 0D 20 F4 C3 0B   F2 25 78 D3 7E B8 CC 46
1970-01-01 00:00:20 0x0040 C8 77 83 7C 95 4D 57 C1   6B D4 FF FF FF FF FF FF
1970-01-01 00:00:20 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:20 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
1970-01-01 00:00:20
1970-01-01 00:00:22 [chain 2]
1970-01-01 00:00:22 0x0000 11 4A 3B F5 A7 1D 0C 21   5A 8F 5D 8D 0A 12 69 9F
1970-01-01 00:00:22 0x0010 FA 47 36 4E 23 6B 0A 10   D8 5F ED 3A A7 AD 9A 9A
1970-01-01 00:00:22 0x0020 13 A1 0D 3E 15 6B 14 51   F7 80 AA DF F8 CE D6 C8
1970-01-01 00:00:22 0x0030 86 80 BD 68 78 55 DA 78   C4 AC A1 0C 96 FE E1 88
1970-01-01 00:00:22 0x0040 2D 09 A3 EA AE 0E E9 FA   5B 53 FF FF FF FF FF FF
1970-01-01 00:00:22 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:22 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:22 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:22 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:22 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:22 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:22 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:22 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:22 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:22 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
1970-01-01 00:00:22 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
1970-01-01 00:00:22
1970-01-01 00:00:22 fan_eft : 0  fan_pwm : 100
1970-01-01 00:00:22 create thread
1970-01-01 00:00:22 fixed working voltage = 1380
1970-01-01 00:00:22 Chain [0] PCB Version: 0x0146
1970-01-01 00:00:22 Chain [0] BOM Version: 0x0100
1970-01-01 00:00:22 Chain [1] PCB Version: 0x0146
1970-01-01 00:00:22 Chain [1] BOM Version: 0x0100
1970-01-01 00:00:22 Chain [2] PCB Version: 0x0146
1970-01-01 00:00:22 Chain [2] BOM Version: 0x0100
1970-01-01 00:00:26 Fan check passed.
1970-01-01 00:00:27 chain[0] PIC jump to app
1970-01-01 00:00:28 Check chain[0] PIC fw version=0x89
1970-01-01 00:00:29 chain[1] PIC jump to app
1970-01-01 00:00:31 Check chain[1] PIC fw version=0x89
1970-01-01 00:00:32 chain[2] PIC jump to app
1970-01-01 00:00:34 Check chain[2] PIC fw version=0x89
1970-01-01 00:00:34 create thread
1970-01-01 00:00:34 max sensor num = 4
1970-01-01 00:00:34 temperature_monitor_thread start...
1970-01-01 00:00:38 power type version: 0x0071
1970-01-01 00:00:38 Enter sleep to make sure power release finish.
1970-01-01 00:01:09 Slept 30 seconds, diff = 1.
1970-01-01 00:01:09 set_voltage_by_steps to 1500.
1970-01-01 00:01:14 start up min temp by 75a = 30
1970-01-01 00:01:14 set UART baud to 115200
1970-01-01 00:01:19 chain avg vol rise to 15.28
1970-01-01 00:01:23 Chain[0]: find 76 asic, times 0
1970-01-01 00:01:30 Chain[1]: find 76 asic, times 0
1970-01-01 00:01:38 Chain[2]: find 76 asic, times 0
1970-01-01 00:01:38 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 0
1970-01-01 00:01:41 min freq in eeprom = 675
1970-01-01 00:01:41 fixed frequency is 675
1970-01-01 00:01:41 Bring up temperature is 30
1970-01-01 00:01:41 set UART baud to 12000000
1970-01-01 00:01:42 set_voltage_by_steps to 1380.
1970-01-01 00:01:49 STATUS_INITED: soc init done!
1970-01-01 00:01:49 create thread
1970-01-01 00:01:49 create thread
1970-01-01 00:06:50 WARN_NET_LOST: network connection lost
1970-01-01 00:06:50 will power off in 249 seconds in case not resume
1970-01-01 00:10:58 network connection lost for 5 min + 249 seconds, power off...
1970-01-01 00:10:58 chain avg vol drop to 9.62
2021-09-24 14:50:12 reload pool, need recalculate
2021-09-24 14:50:12 set_start_time_point total_tv_start_sys=1622 total_tv_end_sys=1623
2021-09-24 14:50:12 network connection resume, restart
2021-09-24 14:50:12 ERROR_NET_LOST: network connection resume, restart...
2021-09-24 14:50:12 stop_mining_and_restart: network connection resume, restart...
2021-09-24 14:50:12 uninit_temp_info
2021-09-24 14:50:12 do not read temp anymore...
2021-09-24 14:50:12 cancel thread
2021-09-24 14:50:12 cancel thread
2021-09-24 14:50:12 cancel thread
2021-09-24 14:50:12 ****power off hashboard****
2021-09-24 14:50:13 start to init...
2021-09-24 14:50:13 Version num 8
2021-09-24 14:50:13 Mask num 0xe000
2021-09-24 14:50:13 freq = 675, percent = 90, hcn = 14560, timeout = 524
2021-09-24 14:50:14 temp monitor thread exit
2021-09-24 14:50:14 restart
2021-09-24 14:50:14 ****power off hashboard****
2021-09-24 14:50:36 Miner compile time: Sun Apr 11 20:36:08 CST 2021 type: Antminer S19
2021-09-24 14:50:37 This is fix-freq version
2021-09-24 14:50:37 Miner compile time: Sun Apr 11 20:36:08 CST 2021 type: Antminer S19
2021-09-24 14:50:37 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2021-04-11 20:48:35
2021-09-24 14:50:37 opt_multi_version     = 1
2021-09-24 14:50:37 opt_bitmain_ab        = 1
2021-09-24 14:50:37 mid_auto_gen          = 0
2021-09-24 14:50:37 opt_bitmain_work_mode = 0
2021-09-24 14:50:37 mmap fpga_mem_addr_hal = 0xb5800000
2021-09-24 14:50:37 HASH_ON_PLUG V9 = 0x7
2021-09-24 14:50:37 Note: front fan is power on!
2021-09-24 14:50:37 Note: rear fan is power on!
2021-09-24 14:50:37 start the http log.
2021-09-24 14:50:37 httpListenThread start ret=0
2021-09-24 14:50:37 start listen on 6060 ...
2021-09-24 14:50:37 load machine NBS1902 conf
2021-09-24 14:50:37 machine : NBS1902
2021-09-24 14:50:37 chain_num 4, chain_domain_num 38, chain_asic_num 76, domain_asic_num 2
2021-09-24 14:50:43 miner ID : 8110744a5cfaa85c
2021-09-24 14:50:43 FPGA Version = 0xB031
2021-09-24 14:50:43 HASH_ON_PLUG V9 = 0x7
2021-09-24 14:50:43 ==========================capability start==========================
2021-09-24 14:50:43 board num = 3
2021-09-24 14:50:43 board id = 0, chain num = 1
2021-09-24 14:50:43 chain id = 0
2021-09-24 14:50:43 board id = 1, chain num = 1
2021-09-24 14:50:43 chain id = 1
2021-09-24 14:50:43 board id = 2, chain num = 1
2021-09-24 14:50:43 chain id = 2
2021-09-24 14:50:43 ==========================capability end============================
2021-09-24 14:50:43 chain num = 3
2021-09-24 14:50:45 [chain 0]
2021-09-24 14:50:45 0x0000 11 4A C0 ED E7 1E A9 37   9B FA 06 AB 2C 92 27 59
2021-09-24 14:50:45 0x0010 D1 F5 3C 3F 03 AA 69 C1   BA 11 C5 4C C4 15 FB 98
2021-09-24 14:50:45 0x0020 C0 31 D0 00 E1 F3 BB 33   9F EE BA 6C AF 9B 0B E7
2021-09-24 14:50:45 0x0030 7A 8C 9D 50 15 B1 8F 48   EB 0E 98 BA 93 C4 79 A0
2021-09-24 14:50:45 0x0040 E0 E7 AC 03 EA BA 4D 8D   9E DF FF FF FF FF FF FF
2021-09-24 14:50:45 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:45 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:45 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:45 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:45 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:45 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:45 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:45 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:45 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:45 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:45 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-09-24 14:50:45
2021-09-24 14:50:47 [chain 1]
2021-09-24 14:50:47 0x0000 11 4A 39 CB AD DC E4 B9   FB 53 13 87 9C BA DF DC
2021-09-24 14:50:47 0x0010 55 98 3C A9 82 F7 43 4B   4F C3 70 58 3A 61 F9 D5
2021-09-24 14:50:47 0x0020 27 A8 BE 6E E6 9D 24 2A   42 D1 18 F1 B5 89 E5 74
2021-09-24 14:50:47 0x0030 78 58 A7 0D 20 F4 C3 0B   F2 25 78 D3 7E B8 CC 46
2021-09-24 14:50:47 0x0040 C8 77 83 7C 95 4D 57 C1   6B D4 FF FF FF FF FF FF
2021-09-24 14:50:47 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:47 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:47 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:47 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:47 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:47 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:47 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:47 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:47 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:47 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:47 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-09-24 14:50:47
2021-09-24 14:50:48 [chain 2]
2021-09-24 14:50:48 0x0000 11 4A 3B F5 A7 1D 0C 21   5A 8F 5D 8D 0A 12 69 9F
2021-09-24 14:50:48 0x0010 FA 47 36 4E 23 6B 0A 10   D8 5F ED 3A A7 AD 9A 9A
2021-09-24 14:50:48 0x0020 13 A1 0D 3E 15 6B 14 51   F7 80 AA DF F8 CE D6 C8
2021-09-24 14:50:48 0x0030 86 80 BD 68 78 55 DA 78   C4 AC A1 0C 96 FE E1 88
2021-09-24 14:50:48 0x0040 2D 09 A3 EA AE 0E E9 FA   5B 53 FF FF FF FF FF FF
2021-09-24 14:50:48 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:48 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:48 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:48 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:48 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:48 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:48 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:48 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:48 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:48 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-24 14:50:48 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-09-24 14:50:48
2021-09-24 14:50:48 fan_eft : 0  fan_pwm : 100
2021-09-24 14:50:48 create thread
2021-09-24 14:50:48 fixed working voltage = 1380
2021-09-24 14:50:48 Chain [0] PCB Version: 0x0146
2021-09-24 14:50:48 Chain [0] BOM Version: 0x0100
2021-09-24 14:50:48 Chain [1] PCB Version: 0x0146
2021-09-24 14:50:48 Chain [1] BOM Version: 0x0100
2021-09-24 14:50:48 Chain [2] PCB Version: 0x0146
2021-09-24 14:50:48 Chain [2] BOM Version: 0x0100
2021-09-24 14:50:52 Fan check passed.
2021-09-24 14:50:53 chain[0] PIC jump to app
2021-09-24 14:50:55 Check chain[0] PIC fw version=0x89
2021-09-24 14:50:56 chain[1] PIC jump to app
2021-09-24 14:50:57 Check chain[1] PIC fw version=0x89
2021-09-24 14:50:59 chain[2] PIC jump to app
2021-09-24 14:51:00 Check chain[2] PIC fw version=0x89
2021-09-24 14:51:00 create thread
2021-09-24 14:51:00 max sensor num = 4
2021-09-24 14:51:00 temperature_monitor_thread start...
2021-09-24 14:51:05 power type version: 0x0071
2021-09-24 14:51:05 Enter sleep to make sure power release finish.
2021-09-24 14:51:36 Slept 30 seconds, diff = 1.
2021-09-24 14:51:36 set_voltage_by_steps to 1500.
2021-09-24 14:51:41 start up min temp by 75a = 29
2021-09-24 14:51:41 set UART baud to 115200
2021-09-24 14:51:45 chain avg vol rise to 15.28
2021-09-24 14:51:49 Chain[0]: find 76 asic, times 0
2021-09-24 14:51:57 Chain[1]: find 76 asic, times 0
2021-09-24 14:52:05 Chain[2]: find 76 asic, times 0
2021-09-24 14:52:05 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 0
2021-09-24 14:52:08 min freq in eeprom = 675
2021-09-24 14:52:08 fixed frequency is 675
2021-09-24 14:52:08 Bring up temperature is 30
2021-09-24 14:52:08 set UART baud to 12000000
2021-09-24 14:52:08 set_voltage_by_steps to 1380.
2021-09-24 14:52:15 STATUS_INITED: soc init done!
2021-09-24 14:52:15 create thread
2021-09-24 14:52:15 create thread
2021-09-24 14:52:17 start to init...
2021-09-24 14:52:28 Init done!
2021-09-24 14:52:28 STATUS_OKAY
2021-09-24 14:52:28 start the cached job
2021-09-24 14:52:28 Version num 8
2021-09-24 14:52:28 Mask num 0xe000
2021-09-24 14:52:28 freq = 675, percent = 90, hcn = 14560, timeout = 524
2021-09-24 14:52:28 set_start_time_point total_tv_start_sys=1758 total_tv_end_sys=1759
2021-09-24 20:43:52 !!! REG_TYPE = 1. 988480000
2021-09-24 20:43:53 !!! REG_TYPE = 1. 864166656
2021-09-24 20:43:57 !!! REG_TYPE = 1. 1006676480
2021-09-24 20:44:03 read asic reg error: expect chain = 0, chip = 18, reg = 184, got chain = 0, chip = 10, reg = 79
2021-09-24 20:44:03 !!! REG_TYPE = 1. 604657664
2021-09-24 20:44:03 !!! REG_TYPE = 1. 604657664
2021-09-24 20:44:03 !!! REG_TYPE = 1. 707858176
2021-09-24 20:44:04 !!! REG_TYPE = 1. 1158301440
2021-09-24 20:44:04 !!! REG_TYPE = 1. 1409960192
2021-09-24 20:44:04 !!! REG_TYPE = 1. 1409960448
2021-09-24 20:44:05 read asic reg error: expect chain = 0, chip = 93, reg = 176, got chain = 0, chip = 2, reg = 252
2021-09-24 20:44:05 read asic reg error: expect chain = 0, chip = 96, reg = 176, got chain = 0, chip = 182, reg = 147
2021-09-24 20:44:05 read asic reg error: expect chain = 0, chip = 96, reg = 176, got chain = 0, chip = 10, reg = 44
2021-09-24 20:44:05 read asic reg error: expect chain = 0, chip = 96, reg = 180, got chain = 0, chip = 28, reg = 182
2021-09-24 20:44:06 read asic reg error: expect chain = 0, chip = 96, reg = 184, got chain = 0, chip = 129, reg = 167
2021-09-24 20:44:06 read asic reg error: expect chain = 0, chip = 99, reg = 176, got chain = 0, chip = 172, reg = 18
2021-09-24 20:44:06 read asic reg error: expect chain = 0, chip = 99, reg = 176, got chain = 0, chip = 203, reg = 30
2021-09-24 20:44:06 !!! REG_TYPE = 1. 1714491136
2021-09-24 20:44:07 read asic reg error: expect chain = 0, chip = 102, reg = 176, got chain = 0, chip = 96, reg = 157
2021-09-24 20:44:07 read asic reg error: expect chain = 0, chip = 129, reg = 176, got chain = 0, chip = 39, reg = 180
2021-09-24 20:44:07 read asic reg error: expect chain = 0, chip = 132, reg = 180, got chain = 0, chip = 61, reg = 60
2021-09-24 20:44:08 read asic reg error: expect chain = 0, chip = 153, reg = 180, got chain = 0, chip = 26, reg = 58
2021-09-24 20:44:08 read asic reg error: expect chain = 0, chip = 162, reg = 176, got chain = 0, chip = 161, reg = 232
2021-09-24 20:44:08 read asic reg error: expect chain = 0, chip = 162, reg = 180, got chain = 0, chip = 105, reg = 7
2021-09-24 20:44:09 read asic reg error: expect chain = 0, chip = 171, reg = 176, got chain = 0, chip = 171, reg = 112
2021-09-24 20:44:09 !!! REG_TYPE = 1. 776798208
2021-09-24 20:44:09 read asic reg error: expect chain = 0, chip = 171, reg = 176, got chain = 0, chip = 214, reg = 105
2021-09-24 20:44:09 read asic reg error: expect chain = 0, chip = 171, reg = 176, got chain = 0, chip = 104, reg = 156
2021-09-24 20:44:09 read asic reg error: expect chain = 0, chip = 171, reg = 176, got chain = 0, chip = 53, reg = 163
2021-09-24 20:44:09 read asic reg error: expect chain = 0, chip = 174, reg = 176, got chain = 0, chip = 166, reg = 93
2021-09-24 23:07:41 chain 0 hash rate 12720.00 low in 15 mins
1970-01-01 00:00:09 Miner compile time: Sun Apr 11 20:36:08 CST 2021 type: Antminer S19
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Sun Apr 11 20:36:08 CST 2021 type: Antminer S19
1970-01-01 00:00:10 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2021-04-11 20:48:35
1970-01-01 00:00:10 opt_multi_version     = 1
1970-01-01 00:00:10 opt_bitmain_ab        = 1
1970-01-01 00:00:10 mid_auto_gen          = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5900000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine NBS1902 conf
1970-01-01 00:00:10 machine : NBS1902
1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 76, domain_asic_num 2
1970-01-01 00:00:16 miner ID : 8110744a5cfaa85c
1970-01-01 00:00:16 FPGA Version = 0xB031
1970-01-01 00:00:16 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:16 ==========================capability start==========================
1970-01-01 00:00:16 board num = 3
1970-01-01 00:00:16 board id = 0, chain num = 1
1970-01-01 00:00:16 chain id = 0
1970-01-01 00:00:16 board id = 1, chain num = 1
1970-01-01 00:00:16 chain id = 1
1970-01-01 00:00:16 board id = 2, chain num = 1
1970-01-01 00:00:16 chain id = 2
1970-01-01 00:00:16 ==========================capability end============================
1970-01-01 00:00:16 chain num = 3
2021-09-25 00:13:59 [chain 0]
2021-09-25 00:13:59 0x0000 11 4A C0 ED E7 1E A9 37   9B FA 06 AB 2C 92 27 59
2021-09-25 00:13:59 0x0010 D1 F5 3C 3F 03 AA 69 C1   BA 11 C5 4C C4 15 FB 98
2021-09-25 00:13:59 0x0020 C0 31 D0 00 E1 F3 BB 33   9F EE BA 6C AF 9B 0B E7
2021-09-25 00:13:59 0x0030 7A 8C 9D 50 15 B1 8F 48   EB 0E 98 BA 93 C4 79 A0
2021-09-25 00:13:59 0x0040 E0 E7 AC 03 EA BA 4D 8D   9E DF FF FF FF FF FF FF
2021-09-25 00:13:59 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:13:59 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:13:59 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:13:59 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:13:59 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:13:59 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:13:59 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:13:59 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:13:59 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:13:59 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:13:59 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-09-25 00:13:59
2021-09-25 00:14:00 [chain 1]
2021-09-25 00:14:00 0x0000 11 4A 39 CB AD DC E4 B9   FB 53 13 87 9C BA DF DC
2021-09-25 00:14:00 0x0010 55 98 3C A9 82 F7 43 4B   4F C3 70 58 3A 61 F9 D5
2021-09-25 00:14:00 0x0020 27 A8 BE 6E E6 9D 24 2A   42 D1 18 F1 B5 89 E5 74
2021-09-25 00:14:00 0x0030 78 58 A7 0D 20 F4 C3 0B   F2 25 78 D3 7E B8 CC 46
2021-09-25 00:14:00 0x0040 C8 77 83 7C 95 4D 57 C1   6B D4 FF FF FF FF FF FF
2021-09-25 00:14:00 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:00 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:00 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:00 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:00 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:00 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:00 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:00 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:00 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:00 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:00 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-09-25 00:14:00
2021-09-25 00:14:02 [chain 2]
2021-09-25 00:14:02 0x0000 11 4A 3B F5 A7 1D 0C 21   5A 8F 5D 8D 0A 12 69 9F
2021-09-25 00:14:02 0x0010 FA 47 36 4E 23 6B 0A 10   D8 5F ED 3A A7 AD 9A 9A
2021-09-25 00:14:02 0x0020 13 A1 0D 3E 15 6B 14 51   F7 80 AA DF F8 CE D6 C8
2021-09-25 00:14:02 0x0030 86 80 BD 68 78 55 DA 78   C4 AC A1 0C 96 FE E1 88
2021-09-25 00:14:02 0x0040 2D 09 A3 EA AE 0E E9 FA   5B 53 FF FF FF FF FF FF
2021-09-25 00:14:02 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:02 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:02 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:02 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:02 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:02 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:02 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:02 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:02 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:02 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 00:14:02 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-09-25 00:14:02
2021-09-25 00:14:02 fan_eft : 0  fan_pwm : 100
2021-09-25 00:14:02 create thread
2021-09-25 00:14:02 fixed working voltage = 1380
2021-09-25 00:14:02 Chain [0] PCB Version: 0x0146
2021-09-25 00:14:02 Chain [0] BOM Version: 0x0100
2021-09-25 00:14:02 Chain [1] PCB Version: 0x0146
2021-09-25 00:14:02 Chain [1] BOM Version: 0x0100
2021-09-25 00:14:02 Chain [2] PCB Version: 0x0146
2021-09-25 00:14:02 Chain [2] BOM Version: 0x0100
2021-09-25 00:14:06 Fan check passed.
2021-09-25 00:14:07 chain[0] PIC jump to app
2021-09-25 00:14:08 Check chain[0] PIC fw version=0x89
2021-09-25 00:14:10 chain[1] PIC jump to app
2021-09-25 00:14:11 Check chain[1] PIC fw version=0x89
2021-09-25 00:14:12 chain[2] PIC jump to app
2021-09-25 00:14:14 Check chain[2] PIC fw version=0x89
2021-09-25 00:14:14 create thread
2021-09-25 00:14:14 max sensor num = 4
2021-09-25 00:14:14 temperature_monitor_thread start...
2021-09-25 00:14:18 power type version: 0x0071
2021-09-25 00:14:18 Enter sleep to make sure power release finish.
2021-09-25 00:15:24 Slept 65 seconds, diff = 5.
2021-09-25 00:15:24 set_voltage_by_steps to 1500.
2021-09-25 00:15:29 start up min temp by 75a = 28
2021-09-25 00:15:29 set UART baud to 115200
2021-09-25 00:15:35 !!! REG_TYPE = 1. 1426063360
2021-09-25 00:15:37 Chain[0]: find 69 asic, times 0
2021-09-25 00:15:38 chain avg vol rise to 15.27
2021-09-25 00:15:45 Chain[0]: find 76 asic, times 1
2021-09-25 00:15:54 Chain[1]: find 76 asic, times 0
2021-09-25 00:16:01 Chain[2]: find 76 asic, times 0
2021-09-25 00:16:01 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 0
2021-09-25 00:16:05 min freq in eeprom = 675
2021-09-25 00:16:05 fixed frequency is 675
2021-09-25 00:16:05 Bring up temperature is 27
2021-09-25 00:16:05 set UART baud to 12000000
2021-09-25 00:16:05 set_voltage_by_steps to 1380.
2021-09-25 00:16:12 STATUS_INITED: soc init done!
2021-09-25 00:16:12 create thread
2021-09-25 00:16:12 create thread
2021-09-25 00:16:15 start to init...
2021-09-25 00:16:26 Init done!
2021-09-25 00:16:26 STATUS_OKAY
2021-09-25 00:16:26 start the cached job
2021-09-25 00:16:26 Version num 8
2021-09-25 00:16:26 Mask num 0xe000
2021-09-25 00:16:26 freq = 675, percent = 90, hcn = 14560, timeout = 524
2021-09-25 00:16:26 set_start_time_point total_tv_start_sys=167 total_tv_end_sys=168
2021-09-25 00:46:13 avg rate is lower than ideal rate, 63788.91 in 29 mins
2021-09-25 01:01:13 chain 0 hash rate 0.00 low in 15 mins
2021-09-25 01:16:14 avg rate is lower than ideal rate, 63619.74 in 30 mins
2021-09-25 01:46:16 avg rate is lower than ideal rate, 63806.45 in 30 mins
2021-09-25 02:16:17 avg rate is lower than ideal rate, 63748.48 in 30 mins
2021-09-25 02:46:19 avg rate is lower than ideal rate, 63612.42 in 30 mins
2021-09-25 03:16:21 avg rate is lower than ideal rate, 63487.18 in 30 mins
2021-09-25 03:46:22 avg rate is lower than ideal rate, 63797.30 in 30 mins
2021-09-25 04:16:24 avg rate is lower than ideal rate, 63642.32 in 30 mins
2021-09-25 04:46:25 avg rate is lower than ideal rate, 63912.09 in 30 mins
2021-09-25 05:16:27 avg rate is lower than ideal rate, 63951.67 in 30 mins
2021-09-25 05:46:29 avg rate is lower than ideal rate, 63883.40 in 30 mins
2021-09-25 06:16:30 avg rate is lower than ideal rate, 64160.96 in 30 mins
2021-09-25 06:46:32 avg rate is lower than ideal rate, 63986.57 in 30 mins
2021-09-25 07:16:33 avg rate is lower than ideal rate, 63758.86 in 30 mins
2021-09-25 07:46:35 avg rate is lower than ideal rate, 63808.89 in 30 mins
2021-09-25 08:16:36 avg rate is lower than ideal rate, 64156.29 in 30 mins
2021-09-25 08:46:38 avg rate is lower than ideal rate, 63377.51 in 30 mins
2021-09-25 09:16:40 avg rate is lower than ideal rate, 64128.82 in 30 mins
2021-09-25 09:46:41 avg rate is lower than ideal rate, 63554.46 in 30 mins
2021-09-25 10:16:43 avg rate is lower than ideal rate, 63694.79 in 30 mins
2021-09-25 10:46:44 avg rate is lower than ideal rate, 63780.83 in 30 mins
2021-09-25 11:16:46 avg rate is lower than ideal rate, 63792.42 in 30 mins
1970-01-01 00:00:09 Miner compile time: Sun Apr 11 20:36:08 CST 2021 type: Antminer S19
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Sun Apr 11 20:36:08 CST 2021 type: Antminer S19
1970-01-01 00:00:10 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2021-04-11 20:48:35
1970-01-01 00:00:10 opt_multi_version     = 1
1970-01-01 00:00:10 opt_bitmain_ab        = 1
1970-01-01 00:00:10 mid_auto_gen          = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine NBS1902 conf
1970-01-01 00:00:10 machine : NBS1902
1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 76, domain_asic_num 2
2021-09-25 11:29:34 miner ID : 8110744a5cfaa85c
2021-09-25 11:29:34 FPGA Version = 0xB031
2021-09-25 11:29:34 HASH_ON_PLUG V9 = 0x7
2021-09-25 11:29:34 ==========================capability start==========================
2021-09-25 11:29:34 board num = 3
2021-09-25 11:29:34 board id = 0, chain num = 1
2021-09-25 11:29:34 chain id = 0
2021-09-25 11:29:34 board id = 1, chain num = 1
2021-09-25 11:29:34 chain id = 1
2021-09-25 11:29:34 board id = 2, chain num = 1
2021-09-25 11:29:34 chain id = 2
2021-09-25 11:29:34 ==========================capability end============================
2021-09-25 11:29:34 chain num = 3
2021-09-25 11:29:36 [chain 0]
2021-09-25 11:29:36 0x0000 11 4A C0 ED E7 1E A9 37   9B FA 06 AB 2C 92 27 59
2021-09-25 11:29:36 0x0010 D1 F5 3C 3F 03 AA 69 C1   BA 11 C5 4C C4 15 FB 98
2021-09-25 11:29:36 0x0020 C0 31 D0 00 E1 F3 BB 33   9F EE BA 6C AF 9B 0B E7
2021-09-25 11:29:36 0x0030 7A 8C 9D 50 15 B1 8F 48   EB 0E 98 BA 93 C4 79 A0
2021-09-25 11:29:36 0x0040 E0 E7 AC 03 EA BA 4D 8D   9E DF FF FF FF FF FF FF
2021-09-25 11:29:36 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-09-25 11:29:36
2021-09-25 11:29:38 [chain 1]
2021-09-25 11:29:38 0x0000 11 4A 39 CB AD DC E4 B9   FB 53 13 87 9C BA DF DC
2021-09-25 11:29:38 0x0010 55 98 3C A9 82 F7 43 4B   4F C3 70 58 3A 61 F9 D5
2021-09-25 11:29:38 0x0020 27 A8 BE 6E E6 9D 24 2A   42 D1 18 F1 B5 89 E5 74
2021-09-25 11:29:38 0x0030 78 58 A7 0D 20 F4 C3 0B   F2 25 78 D3 7E B8 CC 46
2021-09-25 11:29:38 0x0040 C8 77 83 7C 95 4D 57 C1   6B D4 FF FF FF FF FF FF
2021-09-25 11:29:38 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-09-25 11:29:38
2021-09-25 11:29:40 [chain 2]
2021-09-25 11:29:40 0x0000 11 4A 3B F5 A7 1D 0C 21   5A 8F 5D 8D 0A 12 69 9F
2021-09-25 11:29:40 0x0010 FA 47 36 4E 23 6B 0A 10   D8 5F ED 3A A7 AD 9A 9A
2021-09-25 11:29:40 0x0020 13 A1 0D 3E 15 6B 14 51   F7 80 AA DF F8 CE D6 C8
2021-09-25 11:29:40 0x0030 86 80 BD 68 78 55 DA 78   C4 AC A1 0C 96 FE E1 88
2021-09-25 11:29:40 0x0040 2D 09 A3 EA AE 0E E9 FA   5B 53 FF FF FF FF FF FF
2021-09-25 11:29:40 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-09-25 11:29:40
2021-09-25 11:29:40 fan_eft : 0  fan_pwm : 100
2021-09-25 11:29:40 create thread
2021-09-25 11:29:40 fixed working voltage = 1380
2021-09-25 11:29:40 Chain [0] PCB Version: 0x0146
2021-09-25 11:29:40 Chain [0] BOM Version: 0x0100
2021-09-25 11:29:40 Chain [1] PCB Version: 0x0146
2021-09-25 11:29:40 Chain [1] BOM Version: 0x0100
2021-09-25 11:29:40 Chain [2] PCB Version: 0x0146
2021-09-25 11:29:40 Chain [2] BOM Version: 0x0100
2021-09-25 11:29:44 Fan check passed.
2021-09-25 11:29:45 chain[0] PIC jump to app
2021-09-25 11:29:46 Check chain[0] PIC fw version=0x89
2021-09-25 11:29:47 chain[1] PIC jump to app
2021-09-25 11:29:49 Check chain[1] PIC fw version=0x89
2021-09-25 11:29:50 chain[2] PIC jump to app
2021-09-25 11:29:51 Check chain[2] PIC fw version=0x89
2021-09-25 11:29:52 create thread
2021-09-25 11:29:52 max sensor num = 4
2021-09-25 11:29:52 temperature_monitor_thread start...
2021-09-25 11:29:56 power type version: 0x0071
2021-09-25 11:29:56 Enter sleep to make sure power release finish.
2021-09-25 11:31:03 Slept 66 seconds, diff = 5.
2021-09-25 11:31:03 set_voltage_by_steps to 1500.
2021-09-25 11:31:08 start up min temp by 75a = 32
2021-09-25 11:31:08 set UART baud to 115200
2021-09-25 11:31:15 chain avg vol rise to 15.28
2021-09-25 11:31:16 Chain[0]: find 32 asic, times 0
2021-09-25 11:31:24 Chain[0]: find 76 asic, times 1
2021-09-25 11:31:32 Chain[1]: find 76 asic, times 0
2021-09-25 11:31:40 Chain[2]: find 76 asic, times 0
2021-09-25 11:31:40 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 0
2021-09-25 11:31:43 min freq in eeprom = 675
2021-09-25 11:31:43 fixed frequency is 675
2021-09-25 11:31:43 Bring up temperature is 32
2021-09-25 11:31:43 set UART baud to 12000000
2021-09-25 11:31:44 set_voltage_by_steps to 1380.
2021-09-25 11:31:51 STATUS_INITED: soc init done!
2021-09-25 11:31:51 create thread
2021-09-25 11:31:51 create thread
2021-09-25 11:31:54 start to init...
2021-09-25 11:32:04 Init done!
2021-09-25 11:32:04 STATUS_OKAY
2021-09-25 11:32:04 start the cached job
2021-09-25 11:32:04 Version num 8
2021-09-25 11:32:04 Mask num 0xe000
2021-09-25 11:32:04 freq = 675, percent = 90, hcn = 14560, timeout = 524
2021-09-25 11:32:04 set_start_time_point total_tv_start_sys=168 total_tv_end_sys=169
2021-09-25 12:01:51 avg rate is lower than ideal rate, 63838.74 in 29 mins
2021-09-25 12:31:53 avg rate is lower than ideal rate, 64060.44 in 30 mins
2021-09-25 13:01:55 avg rate is lower than ideal rate, 63645.37 in 30 mins

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209680K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19696K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090e410   (9242 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b3cda0   ( 244 kB)
       .bss : 0xc0b3cda0 - 0xc0b77024   ( 233 kB)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6624K (cd482000 - cdafa000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1167210513
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "config_data"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi0:0): reserved for root: 275879 bytes (269 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 1C6A403F-0FD1-49D5-9565-8D3C4712785B, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 2457017153
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID E23BF2AB-CA45-4EFC-A9FE-A6E96461B64C, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbc8000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized


===========================================Miner log===========================================
1970-01-01 00:00:09 Miner compile time: Sun Apr 11 20:36:08 CST 2021 type: Antminer S19
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Sun Apr 11 20:36:08 CST 2021 type: Antminer S19
1970-01-01 00:00:10 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2021-04-11 20:48:35
1970-01-01 00:00:10 opt_multi_version     = 1
1970-01-01 00:00:10 opt_bitmain_ab        = 1
1970-01-01 00:00:10 mid_auto_gen          = 0
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine NBS1902 conf
1970-01-01 00:00:10 machine : NBS1902
1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 76, domain_asic_num 2
2021-09-25 11:29:34 miner ID : 8110744a5cfaa85c
2021-09-25 11:29:34 FPGA Version = 0xB031
2021-09-25 11:29:34 HASH_ON_PLUG V9 = 0x7
2021-09-25 11:29:34 ==========================capability start==========================
2021-09-25 11:29:34 board num = 3
2021-09-25 11:29:34 board id = 0, chain num = 1
2021-09-25 11:29:34 chain id = 0
2021-09-25 11:29:34 board id = 1, chain num = 1
2021-09-25 11:29:34 chain id = 1
2021-09-25 11:29:34 board id = 2, chain num = 1
2021-09-25 11:29:34 chain id = 2
2021-09-25 11:29:34 ==========================capability end============================
2021-09-25 11:29:34 chain num = 3
2021-09-25 11:29:36 [chain 0]
2021-09-25 11:29:36 0x0000 11 4A C0 ED E7 1E A9 37   9B FA 06 AB 2C 92 27 59
2021-09-25 11:29:36 0x0010 D1 F5 3C 3F 03 AA 69 C1   BA 11 C5 4C C4 15 FB 98
2021-09-25 11:29:36 0x0020 C0 31 D0 00 E1 F3 BB 33   9F EE BA 6C AF 9B 0B E7
2021-09-25 11:29:36 0x0030 7A 8C 9D 50 15 B1 8F 48   EB 0E 98 BA 93 C4 79 A0
2021-09-25 11:29:36 0x0040 E0 E7 AC 03 EA BA 4D 8D   9E DF FF FF FF FF FF FF
2021-09-25 11:29:36 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:36 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-09-25 11:29:36
2021-09-25 11:29:38 [chain 1]
2021-09-25 11:29:38 0x0000 11 4A 39 CB AD DC E4 B9   FB 53 13 87 9C BA DF DC
2021-09-25 11:29:38 0x0010 55 98 3C A9 82 F7 43 4B   4F C3 70 58 3A 61 F9 D5
2021-09-25 11:29:38 0x0020 27 A8 BE 6E E6 9D 24 2A   42 D1 18 F1 B5 89 E5 74
2021-09-25 11:29:38 0x0030 78 58 A7 0D 20 F4 C3 0B   F2 25 78 D3 7E B8 CC 46
2021-09-25 11:29:38 0x0040 C8 77 83 7C 95 4D 57 C1   6B D4 FF FF FF FF FF FF
2021-09-25 11:29:38 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:38 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-09-25 11:29:38
2021-09-25 11:29:40 [chain 2]
2021-09-25 11:29:40 0x0000 11 4A 3B F5 A7 1D 0C 21   5A 8F 5D 8D 0A 12 69 9F
2021-09-25 11:29:40 0x0010 FA 47 36 4E 23 6B 0A 10   D8 5F ED 3A A7 AD 9A 9A
2021-09-25 11:29:40 0x0020 13 A1 0D 3E 15 6B 14 51   F7 80 AA DF F8 CE D6 C8
2021-09-25 11:29:40 0x0030 86 80 BD 68 78 55 DA 78   C4 AC A1 0C 96 FE E1 88
2021-09-25 11:29:40 0x0040 2D 09 A3 EA AE 0E E9 FA   5B 53 FF FF FF FF FF FF
2021-09-25 11:29:40 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF
2021-09-25 11:29:40 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A
2021-09-25 11:29:40
2021-09-25 11:29:40 fan_eft : 0  fan_pwm : 100
2021-09-25 11:29:40 create thread
2021-09-25 11:29:40 fixed working voltage = 1380
2021-09-25 11:29:40 Chain [0] PCB Version: 0x0146
2021-09-25 11:29:40 Chain [0] BOM Version: 0x0100
2021-09-25 11:29:40 Chain [1] PCB Version: 0x0146
2021-09-25 11:29:40 Chain [1] BOM Version: 0x0100
2021-09-25 11:29:40 Chain [2] PCB Version: 0x0146
2021-09-25 11:29:40 Chain [2] BOM Version: 0x0100
2021-09-25 11:29:44 Fan check passed.
2021-09-25 11:29:45 chain[0] PIC jump to app
2021-09-25 11:29:46 Check chain[0] PIC fw version=0x89
2021-09-25 11:29:47 chain[1] PIC jump to app
2021-09-25 11:29:49 Check chain[1] PIC fw version=0x89
2021-09-25 11:29:50 chain[2] PIC jump to app
2021-09-25 11:29:51 Check chain[2] PIC fw version=0x89
2021-09-25 11:29:52 create thread
2021-09-25 11:29:52 max sensor num = 4
2021-09-25 11:29:52 temperature_monitor_thread start...
2021-09-25 11:29:56 power type version: 0x0071
2021-09-25 11:29:56 Enter sleep to make sure power release finish.
2021-09-25 11:31:03 Slept 66 seconds, diff = 5.
2021-09-25 11:31:03 set_voltage_by_steps to 1500.
2021-09-25 11:31:08 start up min temp by 75a = 32
2021-09-25 11:31:08 set UART baud to 115200
2021-09-25 11:31:15 chain avg vol rise to 15.28
2021-09-25 11:31:16 Chain[0]: find 32 asic, times 0
2021-09-25 11:31:24 Chain[0]: find 76 asic, times 1
2021-09-25 11:31:32 Chain[1]: find 76 asic, times 0
2021-09-25 11:31:40 Chain[2]: find 76 asic, times 0
2021-09-25 11:31:40 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 0
2021-09-25 11:31:43 min freq in eeprom = 675
2021-09-25 11:31:43 fixed frequency is 675
2021-09-25 11:31:43 Bring up temperature is 32
2021-09-25 11:31:43 set UART baud to 12000000
2021-09-25 11:31:44 set_voltage_by_steps to 1380.
2021-09-25 11:31:51 STATUS_INITED: soc init done!
2021-09-25 11:31:51 create thread
2021-09-25 11:31:51 create thread
2021-09-25 11:31:54 start to init...
2021-09-25 11:32:04 Init done!
2021-09-25 11:32:04 STATUS_OKAY
2021-09-25 11:32:04 start the cached job
2021-09-25 11:32:04 Version num 8
2021-09-25 11:32:04 Mask num 0xe000
2021-09-25 11:32:04 freq = 675, percent = 90, hcn = 14560, timeout = 524
2021-09-25 11:32:04 set_start_time_point total_tv_start_sys=168 total_tv_end_sys=169
2021-09-25 12:01:51 avg rate is lower than ideal rate, 63838.74 in 29 mins
2021-09-25 12:31:53 avg rate is lower than ideal rate, 64060.44 in 30 mins
2021-09-25 13:01:55 avg rate is lower than ideal rate, 63645.37 in 30 mins
2021-09-25 13:31:56 avg rate is lower than ideal rate, 64023.81 in 30 mins
2021-09-25 14:01:58 avg rate is lower than ideal rate, 63893.10 in 30 mins
2021-09-25 14:31:59 avg rate is lower than ideal rate, 63514.19 in 30 mins
2021-09-25 15:02:01 avg rate is lower than ideal rate, 63807.69 in 30 mins
2021-09-25 15:32:03 avg rate is lower than ideal rate, 63677.71 in 30 mins
2021-09-25 16:02:04 avg rate is lower than ideal rate, 64111.72 in 30 mins
2021-09-25 16:32:06 avg rate is lower than ideal rate, 63655.13 in 30 mins
2021-09-25 17:02:07 avg rate is lower than ideal rate, 64079.98 in 30 mins
2021-09-25 17:32:09 avg rate is lower than ideal rate, 64066.38 in 30 mins
2021-09-25 18:02:11 avg rate is lower than ideal rate, 63803.40 in 30 mins
2021-09-25 18:32:12 avg rate is lower than ideal rate, 64094.63 in 30 mins
2021-09-25 19:02:14 avg rate is lower than ideal rate, 64043.81 in 30 mins
2021-09-25 19:32:15 avg rate is lower than ideal rate, 64130.04 in 30 mins
2021-09-25 20:02:17 avg rate is lower than ideal rate, 63752.76 in 30 mins
2021-09-25 20:32:18 avg rate is lower than ideal rate, 63429.37 in 30 mins
2021-09-25 21:02:20 avg rate is lower than ideal rate, 63768.62 in 30 mins
2021-09-25 21:32:22 avg rate is lower than ideal rate, 63565.44 in 30 mins
2021-09-25 22:02:23 avg rate is lower than ideal rate, 63738.71 in 30 mins
2021-09-25 22:32:25 avg rate is lower than ideal rate, 63685.64 in 30 mins
2021-09-25 23:02:26 avg rate is lower than ideal rate, 63970.59 in 30 mins

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9344 r8192 d15232 u32768
[    0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364252K/507904K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 143652K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06e8cf4   (7044 kB)
[    0.000000]       .init : 0xc06e9000 - 0xc071d480   ( 210 kB)
[    0.000000]       .data : 0xc071e000 - 0xc0767058   ( 293 kB)
[    0.000000]        .bss : 0xc0767064 - 0xc07a7d64   ( 260 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000288] ps7-ttc #0 at df804000, irq=43
[    0.000590] Console: colour dummy device 80x30
[    0.000619] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040195] pid_max: default: 32768 minimum: 301
[    0.040404] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040423] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042595] CPU: Testing write buffer coherency: ok
[    0.042909] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042964] Setting up static identity map for 0x4d3ec0 - 0x4d3f18
[    0.043183] L310 cache controller enabled
[    0.043202] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.120985] CPU1: Booted secondary processor
[    0.210216] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210346] Brought up 2 CPUs
[    0.210365] SMP: Total of 2 processors activated.
[    0.210374] CPU: All CPU(s) started in SVC mode.
[    0.211030] devtmpfs: initialized
[    0.213470] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214656] regulator-dummy: no parameters
[    0.222042] NET: Registered protocol family 16
[    0.224307] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226576] cpuidle: using governor ladder
[    0.226590] cpuidle: using governor menu
[    0.233973] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235492] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235506] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235614] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.258018] bio: create slab <bio-0> at 0
[    0.259429] vgaarb: loaded
[    0.260119] SCSI subsystem initialized
[    0.261204] usbcore: registered new interface driver usbfs
[    0.261380] usbcore: registered new interface driver hub
[    0.261608] usbcore: registered new device driver usb
[    0.262122] media: Linux media interface: v0.10
[    0.262278] Linux video capture interface: v2.00
[    0.262515] pps_core: LinuxPPS API ver. 1 registered
[    0.262527] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.262648] PTP clock support registered
[    0.263011] EDAC MC: Ver: 3.0.0
[    0.264037] Advanced Linux Sound Architecture Driver Initialized.
[    0.266780] DMA-API: preallocated 4096 debug entries
[    0.266792] DMA-API: debugging enabled by kernel config
[    0.266860] Switched to clocksource arm_global_timer
[    0.288281] NET: Registered protocol family 2
[    0.288918] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.288975] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.289059] TCP: Hash tables configured (established 4096 bind 4096)
[    0.289100] TCP: reno registered
[    0.289118] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.289146] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.289373] NET: Registered protocol family 1
[    0.289705] RPC: Registered named UNIX socket transport module.
[    0.289717] RPC: Registered udp transport module.
[    0.289726] RPC: Registered tcp transport module.
[    0.289734] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.289746] PCI: CLS 0 bytes, default 64
[    0.290170] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.292156] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.294227] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.294414] msgmni has been set to 967
[    0.295176] io scheduler noop registered
[    0.295190] io scheduler deadline registered
[    0.295238] io scheduler cfq registered (default)
[    0.306737] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.306756] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.429759] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.997616] console [ttyPS0] enabled
[    1.001871] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.009517] [drm] Initialized drm 1.1.0 20060810
[    1.026454] brd: module loaded
[    1.035805] loop: module loaded
[    1.045219] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.051332] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.059230] libphy: XEMACPS mii bus: probed
[    1.063599] ------------- phy_id = 0x3625e62
[    1.068339] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.076912] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.083533] ehci-pci: EHCI PCI platform driver
[    1.090788] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.097650] usbcore: registered new interface driver usb-storage
[    1.104486] mousedev: PS/2 mouse device common for all mice
[    1.110624] i2c /dev entries driver
[    1.117583] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.123062] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.128985] Xilinx Zynq CpuIdle Driver started
[    1.133828] sdhci: Secure Digital Host Controller Interface driver
[    1.140030] sdhci: Copyright(c) Pierre Ossman
[    1.144296] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.151130] mmc0: no vqmmc regulator found
[    1.155141] mmc0: no vmmc regulator found
[    1.196887] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205568] usbcore: registered new interface driver usbhid
[    1.211074] usbhid: USB HID core driver
[    1.215781] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.222082] nand: Micron MT29F2G08ABAEAWP
[    1.226048] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.231986] Bad block table found at page 131008, version 0x01
[    1.238206] Bad block table found at page 130944, version 0x01
[    1.244255] 3 ofpart partitions found on MTD device pl353-nand
[    1.250039] Creating 3 MTD partitions on "pl353-nand":
[    1.255129] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.263171] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270496] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.279231] nf_conntrack version 0.5.0 (7739 buckets, 30956 max)
[    1.285760] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.291084] TCP: cubic registered
[    1.294316] NET: Registered protocol family 17
[    1.299049] Registering SWP/SWPB emulation handler
[    1.304936] regulator-dummy: disabling
[    1.309303] UBI: attaching mtd1 to ubi0
[    1.834738] UBI: scanning is finished
[    1.846306] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.853384] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.860148] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.866812] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.873690] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.879671] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.886778] UBI: max/mean erase counter: 18/11, WL threshold: 4096, image sequence number: 768485946
[    1.895908] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.905124] UBI: background thread "ubi_bgt0d" started, PID 1085
[    1.905129] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.909133] ALSA device list:
[    1.909136]   No soundcards found.
[    1.925423] UBIFS: background thread "ubifs_bgt0_0" started, PID 1087
[    1.954542] UBIFS: recovery needed
[    2.876233] UBIFS: recovery completed
[    2.879927] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.885847] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.894981] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.904871] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.909906] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E215D0B0-FA6F-4ECF-A946-F9E82D00BE06, small LPT model
[    2.920965] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.927688] devtmpfs: mounted
[    2.930797] Freeing unused kernel memory: 208K (c06e9000 - c071d000)
[    3.788965] random: dd urandom read with 0 bits of entropy available
[    4.086880]
[    4.086880] bcm54xx_config_init
[    4.966907]
[    4.966907] bcm54xx_config_init
[   15.967742] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   15.973827] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   29.931829] In axi fpga driver!
[   29.934894] request_mem_region OK!
[   29.938315] AXI fpga dev virtual address is 0xdf9fc000
[   29.943392] *base_vir_addr = 0xc51e
[   29.955220] In fpga mem driver!
[   29.959588] request_mem_region OK!
[   29.963099] fpga mem virtual address is 0xe2000000
[   30.746177]
[   30.746177] bcm54xx_config_init
[   31.626064]
[   31.626064] bcm54xx_config_init
[   35.626448] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   35.632468] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  523.060240] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507424768
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6f78000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5d71000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 8128b4c67910481c
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:9113: Chain[5] ASIC[17] has core num=2
main.c:9113: Chain[5] ASIC[19] has core num=1
main.c:9113: Chain[5] ASIC[54] has core num=1
main.c:9113: Chain[5] ASIC[55] has core num=2
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:9113: Chain[6] ASIC[15] has core num=15
main.c:9113: Chain[6] ASIC[35] has core num=5
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:9113: Chain[7] ASIC[3] has core num=2
main.c:9113: Chain[7] ASIC[59] has core num=15
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=159 on chain[5], value=850
main.c:9183: get PIC voltage=57 on chain[6], value=910
main.c:9183: get PIC voltage=159 on chain[7], value=850
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,39,28
main.c:9366: chain[5] temp chip I2C addr=0x9c
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,39,28
main.c:9366: chain[6] temp chip I2C addr=0x9c
main.c:9372: chain[6] has no middle temp, use special fix mode.
main.c:9349: chain[7] temp offset record: 62,0,0,0,0,0,39,28
main.c:9366: chain[7] temp chip I2C addr=0x9c
main.c:9372: chain[7] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 3
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649:
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 3, total chain num = 3
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found=23206 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12285:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12334:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12355:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12366:bitmain_c5_init: Miner compile time: Tue Jul 30 20:37:39 CST 2019 type: Antminer S9
driver-btm-c5.c:12456:bitmain_c5_init: miner ID : 8128b4c67910481c
driver-btm-c5.c:12613:bitmain_c5_init: Checking fans...
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5760
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5760
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5760
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[4] speed=5760
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:13148:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x48 0x00 0x48 0x04 0x48 0x08 0x48 0x00 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x05 0x48 0x09 0x48 0x23 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=3 : 0
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J6] has backup chain_voltage=890
driver-btm-c5.c:13233:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13148:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x49 0x00 0x49 0x04 0x49 0x09 0x49 0x00 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x05 0x49 0x09 0x49 0x23 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=3 : 0
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J7] has backup chain_voltage=890
driver-btm-c5.c:13233:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:13148:bitmain_c5_init: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13162:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4d 0x00 0x4d 0x04 0x4d 0x0d 0x4d 0x00 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x05 0x4d 0x07 0x4d 0x23 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d
driver-btm-c5.c:13189:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13195:bitmain_c5_init: Detect: S9_63 use voltage level=3 : 0
driver-btm-c5.c:13211:bitmain_c5_init: Chain[J8] has backup chain_voltage=870
driver-btm-c5.c:13233:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1883:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
driver-btm-c5.c:12237:init_exist_chain_table: total_exist_chain_num = 3
btm_adjust_hash.c:910:adjust_vol: Chain[J6] original vol value=890 adjusted vol value:830
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=159 value=850
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J6] original chain_voltage_value=890 adjusted chain_voltage_value:830, value=850
driver-btm-c5.c:13379:bitmain_c5_init: Chain[J6] will use backup chain_voltage_pic=830 [193]
driver-btm-c5.c:13389:bitmain_c5_init: Chain[J6] get working chain_voltage_pic=193
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[00] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[01] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[02] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[03] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[04] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[05] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[06] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[07] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[08] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[09] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[10] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[11] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[12] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[13] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[14] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[15] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[16] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[17] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[18] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[19] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[20] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[21] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[22] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[23] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[24] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[25] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[26] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[27] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[28] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[29] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[30] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[31] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[32] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[33] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[34] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[35] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[36] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[37] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[38] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[39] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[40] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[41] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[42] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[43] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[44] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[45] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[46] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[47] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[48] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[49] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[50] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[51] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[52] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[53] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[54] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[55] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[56] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[57] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[58] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[59] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[60] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[61] original freq=637 adjusted freq:429
btm_adjust_hash.c:795:set_asic_freq: Chain[J6] Aisc[62] original freq=637 adjusted freq:429
btm_adjust_hash.c:910:adjust_vol: Chain[J7] original vol value=890 adjusted vol value:830
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=57 value=910
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J7] original chain_voltage_value=890 adjusted chain_voltage_value:830, value=910
driver-btm-c5.c:13379:bitmain_c5_init: Chain[J7] will use backup chain_voltage_pic=830 [193]
driver-btm-c5.c:13389:bitmain_c5_init: Chain[J7] get working chain_voltage_pic=193
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[00] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[01] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[02] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[03] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[04] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[05] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[06] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[07] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[08] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[09] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[10] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[11] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[12] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[13] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[14] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[15] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[16] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[17] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[18] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[19] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[20] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[21] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[22] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[23] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[24] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[25] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[26] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[27] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[28] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[29] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[30] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[31] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[32] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[33] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[34] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[35] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[36] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[37] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[38] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[39] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[40] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[41] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[42] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[43] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[44] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[45] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[46] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[47] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[48] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[49] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[50] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[51] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[52] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[53] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[54] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[55] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[56] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[57] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[58] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[59] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[60] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[61] original freq=643 adjusted freq:437
btm_adjust_hash.c:795:set_asic_freq: Chain[J7] Aisc[62] original freq=643 adjusted freq:437
btm_adjust_hash.c:910:adjust_vol: Chain[J8] original vol value=870 adjusted vol value:830
driver-btm-c5.c:13361:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=159 value=850
driver-btm-c5.c:13362:bitmain_c5_init: Chain[J8] original chain_voltage_value=870 adjusted chain_voltage_value:830, value=850
driver-btm-c5.c:13379:bitmain_c5_init: Chain[J8] will use backup chain_voltage_pic=830 [193]
driver-btm-c5.c:13389:bitmain_c5_init: Chain[J8] get working chain_voltage_pic=193
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[00] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[01] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[02] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[03] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[04] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[05] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[06] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[07] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[08] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[09] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[10] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[11] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[12] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[13] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[14] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[15] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[16] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[17] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[18] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[19] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[20] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[21] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[22] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[23] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[24] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[25] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[26] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[27] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[28] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[29] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[30] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[31] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[32] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[33] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[34] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[35] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[36] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[37] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[38] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[39] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[40] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[41] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[42] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[43] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[44] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[45] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[46] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[47] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[48] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[49] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[50] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[51] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[52] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[53] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[54] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[55] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[56] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[57] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[58] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[59] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[60] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[61] original freq=668 adjusted freq:462
btm_adjust_hash.c:795:set_asic_freq: Chain[J8] Aisc[62] original freq=668 adjusted freq:462
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J6] has 61 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J6] has 62 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J6] has 62 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J6] has 61 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J6] has 61 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J6] has 61 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J6] has 61 asic
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J7] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13522:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13494:bitmain_c5_init: Chain[J8] has 63 asic
driver-btm-c5.c:4543:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[17] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[19] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[54] has core num=1
driver-btm-c5.c:4553:set_frequency: Chain[J6] ASIC[55] has core num=2
driver-btm-c5.c:4543:set_frequency: Chain[J8] has core num in PIC
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[3] has core num=2
driver-btm-c5.c:4553:set_frequency: Chain[J8] ASIC[59] has core num=15
driver-btm-c5.c:4583:set_frequency: miner total rate=6342GH/s ideal_total_hash_rate = 6000GH/s
driver-btm-c5.c:4608:set_frequency: read PIC voltage=910 on chain[5]
driver-btm-c5.c:4610:set_frequency: Chain:5 chipnum=61
driver-btm-c5.c:4630:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4780:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4785:set_frequency: Chain:5 base freq=637
Asic[ 0]:429 Asic[ 1]:429 Asic[ 2]:429 Asic[ 3]:429 Asic[ 4]:429 Asic[ 5]:429 Asic[ 6]:429 Asic[ 7]:429
Asic[ 8]:429 Asic[ 9]:429 Asic[10]:429 Asic[11]:429 Asic[12]:429 Asic[13]:429 Asic[14]:429 Asic[15]:429
Asic[16]:429 Asic[17]:429 Asic[18]:429 Asic[19]:429 Asic[20]:429 Asic[21]:429 Asic[22]:429 Asic[23]:429
Asic[24]:429 Asic[25]:429 Asic[26]:429 Asic[27]:429 Asic[28]:429 Asic[29]:429 Asic[30]:429 Asic[31]:429
Asic[32]:429 Asic[33]:429 Asic[34]:429 Asic[35]:429 Asic[36]:429 Asic[37]:429 Asic[38]:429 Asic[39]:429
Asic[40]:429 Asic[41]:429 Asic[42]:429 Asic[43]:429 Asic[44]:429 Asic[45]:429 Asic[46]:429 Asic[47]:429
Asic[48]:429 Asic[49]:429 Asic[50]:429 Asic[51]:429 Asic[52]:429 Asic[53]:429 Asic[54]:429 Asic[55]:429
Asic[56]:429 Asic[57]:429 Asic[58]:429 Asic[59]:429 Asic[60]:429
driver-btm-c5.c:4821:set_frequency: Chain:5 max freq=429
driver-btm-c5.c:4822:set_frequency: Chain:5 min freq=429

driver-btm-c5.c:4608:set_frequency: read PIC voltage=910 on chain[7]
driver-btm-c5.c:4610:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:4630:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:4780:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:4785:set_frequency: Chain:7 base freq=668
Asic[ 0]:462 Asic[ 1]:462 Asic[ 2]:462 Asic[ 3]:462 Asic[ 4]:462 Asic[ 5]:462 Asic[ 6]:462 Asic[ 7]:462
Asic[ 8]:462 Asic[ 9]:462 Asic[10]:462 Asic[11]:462 Asic[12]:462 Asic[13]:462 Asic[14]:462 Asic[15]:462
Asic[16]:462 Asic[17]:462 Asic[18]:462 Asic[19]:462 Asic[20]:462 Asic[21]:462 Asic[22]:462 Asic[23]:462
Asic[24]:462 Asic[25]:462 Asic[26]:462 Asic[27]:462 Asic[28]:462 Asic[29]:462 Asic[30]:462 Asic[31]:462
Asic[32]:462 Asic[33]:462 Asic[34]:462 Asic[35]:462 Asic[36]:462 Asic[37]:462 Asic[38]:462 Asic[39]:462
Asic[40]:462 Asic[41]:462 Asic[42]:462 Asic[43]:462 Asic[44]:462 Asic[45]:462 Asic[46]:462 Asic[47]:462
Asic[48]:462 Asic[49]:462 Asic[50]:462 Asic[51]:462 Asic[52]:462 Asic[53]:462 Asic[54]:462 Asic[55]:462
Asic[56]:462 Asic[57]:462 Asic[58]:462 Asic[59]:462 Asic[60]:462 Asic[61]:462 Asic[62]:462
driver-btm-c5.c:4821:set_frequency: Chain:7 max freq=462
driver-btm-c5.c:4822:set_frequency: Chain:7 min freq=462


driver-btm-c5.c:4831:set_frequency: Miner fix freq ...
driver-btm-c5.c:4866:set_frequency: read PIC voltage=910 on chain[5]
driver-btm-c5.c:4867:set_frequency: Chain:5 chipnum=61
driver-btm-c5.c:4886:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5070:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5075:set_frequency: Chain:5 base freq=637
Asic[ 0]:429 Asic[ 1]:429 Asic[ 2]:429 Asic[ 3]:429 Asic[ 4]:429 Asic[ 5]:429 Asic[ 6]:429 Asic[ 7]:429
Asic[ 8]:429 Asic[ 9]:429 Asic[10]:429 Asic[11]:429 Asic[12]:429 Asic[13]:429 Asic[14]:429 Asic[15]:429
Asic[16]:429 Asic[17]:429 Asic[18]:429 Asic[19]:429 Asic[20]:429 Asic[21]:429 Asic[22]:429 Asic[23]:429
Asic[24]:429 Asic[25]:429 Asic[26]:429 Asic[27]:429 Asic[28]:429 Asic[29]:429 Asic[30]:429 Asic[31]:429
Asic[32]:429 Asic[33]:429 Asic[34]:429 Asic[35]:429 Asic[36]:429 Asic[37]:429 Asic[38]:429 Asic[39]:429
Asic[40]:429 Asic[41]:429 Asic[42]:429 Asic[43]:429 Asic[44]:429 Asic[45]:429 Asic[46]:429 Asic[47]:429
Asic[48]:429 Asic[49]:429 Asic[50]:429 Asic[51]:429 Asic[52]:429 Asic[53]:429 Asic[54]:429 Asic[55]:429
Asic[56]:429 Asic[57]:429 Asic[58]:429 Asic[59]:429 Asic[60]:429
driver-btm-c5.c:5122:set_frequency: Chain:5 max freq=429
driver-btm-c5.c:5123:set_frequency: Chain:5 min freq=429

driver-btm-c5.c:4866:set_frequency: read PIC voltage=910 on chain[7]
driver-btm-c5.c:4867:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:4886:set_frequency: Chain[J8] voltage added=0.0V
driver-btm-c5.c:5070:set_frequency: Chain:7 temp offset=0
driver-btm-c5.c:5075:set_frequency: Chain:7 base freq=668
Asic[ 0]:462 Asic[ 1]:462 Asic[ 2]:462 Asic[ 3]:462 Asic[ 4]:462 Asic[ 5]:462 Asic[ 6]:462 Asic[ 7]:462
Asic[ 8]:462 Asic[ 9]:462 Asic[10]:462 Asic[11]:462 Asic[12]:462 Asic[13]:462 Asic[14]:462 Asic[15]:462
Asic[16]:462 Asic[17]:462 Asic[18]:462 Asic[19]:462 Asic[20]:462 Asic[21]:462 Asic[22]:462 Asic[23]:462
Asic[24]:462 Asic[25]:462 Asic[26]:462 Asic[27]:462 Asic[28]:462 Asic[29]:462 Asic[30]:462 Asic[31]:462
Asic[32]:462 Asic[33]:462 Asic[34]:462 Asic[35]:462 Asic[36]:462 Asic[37]:462 Asic[38]:462 Asic[39]:462
Asic[40]:462 Asic[41]:462 Asic[42]:462 Asic[43]:462 Asic[44]:462 Asic[45]:462 Asic[46]:462 Asic[47]:462
Asic[48]:462 Asic[49]:462 Asic[50]:462 Asic[51]:462 Asic[52]:462 Asic[53]:462 Asic[54]:462 Asic[55]:462
Asic[56]:462 Asic[57]:462 Asic[58]:462 Asic[59]:462 Asic[60]:462 Asic[61]:462 Asic[62]:462
driver-btm-c5.c:5122:set_frequency: Chain:7 max freq=462
driver-btm-c5.c:5123:set_frequency: Chain:7 min freq=462

driver-btm-c5.c:5131:set_frequency: max freq = 462
driver-btm-c5.c:4149:ProcessFixFreq: totalRate = 6342, fixed_totalRate = 6000
driver-btm-c5.c:9614:init_uart_baud: set baud=1
driver-btm-c5.c:6605:calibration_sensor_offset: Chain[J8] PIC temp offset: 62,0,0,0,0,0,39,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6639:calibration_sensor_offset: chain[8] temp chip I2C addr=0x9c
driver-btm-c5.c:6647:calibration_sensor_offset: chain[8] has no middle temp, use special fix mode.
driver-btm-c5.c:6672:calibration_sensor_offset: Chain[J8] chip[244] use PIC middle temp offset=0 typeID=00
driver-btm-c5.c:6777:calibration_sensor_offset: Warning: Chain[J8] has no temp offset in PIC! will fix it
driver-btm-c5.c:6901:calibration_sensor_offset: Chain[J8] use default temp chip[244]
driver-btm-c5.c:6331:do_calibration_sensor_offset: Chain[J8] try read temp chip[244] ID=00 (I2C addr=0x98)
driver-btm-c5.c:6343:do_calibration_sensor_offset: Chain[J8] try read temp chip[244] ID=00 (I2C addr=0x9A)
driver-btm-c5.c:6355:do_calibration_sensor_offset: Chain[J8] try read temp chip[244] ID=00 (I2C addr=0x9C)
driver-btm-c5.c:6396:do_calibration_sensor_offset: New offset Chain[8] chip[244] local:-64 remote:-64 offset:21
driver-btm-c5.c:6906:calibration_sensor_offset: Chain[J8] chip[244] get middle temp offset=21 typeID=00
driver-btm-c5.c:13824:bitmain_c5_init: open core three times
driver-btm-c5.c:13824:bitmain_c5_init: open core three times
driver-btm-c5.c:12129:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 900
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 890
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 880
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 880
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 870
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 870
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 860
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 860
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 850
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 850
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 840
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 840
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 830
driver-btm-c5.c:12109:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 830
driver-btm-c5.c:14027:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=1537 total_tv_end_sys=1538
driver-btm-c5.c:10330:check_system_work: restartNum = 2 , auto-reinit enabled...
util.c:3207:initiate_stratum: mining.subscribe:{"id": 0, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9/13500"]}
util.c:3207:initiate_stratum: mining.subscribe:{"id": 1, "method": "mining.subscribe", "params": ["bmminer/2.0.0/Antminer S9/13500"]}
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=1.40900 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=3.12000
Asic[25]=3.07000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=1.40900 Asic[30]=0.00000 Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Done read temp on Chain[5]
read failed on Chain[7] Chip[62] middle Temp old value:15
Special fix Chain[7] Chip[62] middle Temp = 15
Done read temp on Chain[7]
Max pcb temp : 0
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=318

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000293] ps7-ttc #0 at df804000, irq=43
[    0.000595] Console: colour dummy device 80x30
[    0.000625] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090244] pid_max: default: 32768 minimum: 301
[    0.090458] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090477] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.092655] CPU: Testing write buffer coherency: ok
[    0.092977] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.093037] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.093253] L310 cache controller enabled
[    0.093272] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.170987] CPU1: Booted secondary processor
[    0.260221] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260351] Brought up 2 CPUs
[    0.260370] SMP: Total of 2 processors activated.
[    0.260379] CPU: All CPU(s) started in SVC mode.
[    0.261036] devtmpfs: initialized
[    0.263435] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264622] regulator-dummy: no parameters
[    0.272039] NET: Registered protocol family 16
[    0.274319] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.276577] cpuidle: using governor ladder
[    0.276590] cpuidle: using governor menu
[    0.283910] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.285414] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.285428] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.285539] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.306873] bio: create slab <bio-0> at 0
[    0.308241] vgaarb: loaded
[    0.308929] SCSI subsystem initialized
[    0.309797] usbcore: registered new interface driver usbfs
[    0.309972] usbcore: registered new interface driver hub
[    0.310485] usbcore: registered new device driver usb
[    0.311073] media: Linux media interface: v0.10
[    0.312012] Linux video capture interface: v2.00
[    0.312298] pps_core: LinuxPPS API ver. 1 registered
[    0.312310] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.312432] PTP clock support registered
[    0.312783] EDAC MC: Ver: 3.0.0
[    0.313817] Advanced Linux Sound Architecture Driver Initialized.
[    0.316543] DMA-API: preallocated 4096 debug entries
[    0.316557] DMA-API: debugging enabled by kernel config
[    0.316630] Switched to clocksource arm_global_timer
[    0.336540] NET: Registered protocol family 2
[    0.337277] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.337335] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.337420] TCP: Hash tables configured (established 4096 bind 4096)
[    0.337462] TCP: reno registered
[    0.337479] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.337510] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.337738] NET: Registered protocol family 1
[    0.338067] RPC: Registered named UNIX socket transport module.
[    0.338080] RPC: Registered udp transport module.
[    0.338088] RPC: Registered tcp transport module.
[    0.338097] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.338109] PCI: CLS 0 bytes, default 64
[    0.338541] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.340518] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.342577] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.342764] msgmni has been set to 967
[    0.343526] io scheduler noop registered
[    0.343539] io scheduler deadline registered
[    0.343595] io scheduler cfq registered (default)
[    0.355512] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.355532] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.477618] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.045022] console [ttyPS0] enabled
[    1.049295] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.056928] [drm] Initialized drm 1.1.0 20060810
[    1.073755] brd: module loaded
[    1.083082] loop: module loaded
[    1.092512] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.098297] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.106059] libphy: XEMACPS mii bus: probed
[    1.110461] ------------- phy_id = 0x3625e62
[    1.115174] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.124081] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.130905] ehci-pci: EHCI PCI platform driver
[    1.138139] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.144934] usbcore: registered new interface driver usb-storage
[    1.151811] mousedev: PS/2 mouse device common for all mice
[    1.157927] i2c /dev entries driver
[    1.164790] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.170329] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.176190] Xilinx Zynq CpuIdle Driver started
[    1.181067] sdhci: Secure Digital Host Controller Interface driver
[    1.187188] sdhci: Copyright(c) Pierre Ossman
[    1.191505] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.198375] mmc0: no vqmmc regulator found
[    1.202385] mmc0: no vmmc regulator found
[    1.246670] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.255329] usbcore: registered new interface driver usbhid
[    1.260841] usbhid: USB HID core driver
[    1.265535] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.271830] nand: Micron MT29F2G08ABAEAWP
[    1.275800] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.281740] Bad block table found at page 131008, version 0x01
[    1.287975] Bad block table found at page 130944, version 0x01
[    1.294030] 3 ofpart partitions found on MTD device pl353-nand
[    1.299795] Creating 3 MTD partitions on "pl353-nand":
[    1.304899] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.312955] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.320245] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.329141] TCP: cubic registered
[    1.332377] NET: Registered protocol family 17
[    1.337104] Registering SWP/SWPB emulation handler
[    1.342970] regulator-dummy: disabling
[    1.347308] UBI: attaching mtd1 to ubi0
[    1.706155] UBI: scanning is finished
[    1.717988] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.725042] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.731837] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.738515] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.745352] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.751362] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.758473] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 200056553
[    1.767417] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.776613] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.776618] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.780548] ALSA device list:
[    1.780551]   No soundcards found.
[    1.797437] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.967149] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.973078] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.982212] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    1.992095] UBIFS: reserved for root: 0 bytes (0 KiB)
[    1.997134] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C4D8A166-736F-4D68-8DC1-9B94F2C9EB77, small LPT model
[    2.029398] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.057545] devtmpfs: mounted
[    2.060654] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    3.215653] random: dd urandom read with 0 bits of entropy available
[    3.556674]
[    3.556674] bcm54xx_config_init
[    4.156671]
[    4.156671] bcm54xx_config_init
[    7.157502] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.163590] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   20.565548] In axi fpga driver!
[   20.568646] request_mem_region OK!
[   20.572006] AXI fpga dev virtual address is 0xdf9fc000
[   20.577151] *base_vir_addr = 0xc51a
[   20.586923] In fpga mem driver!
[   20.592211] request_mem_region OK!
[   20.595770] fpga mem virtual address is 0xe2000000
[   21.296674]
[   21.296674] bcm54xx_config_init
[   21.896683]
[   21.896683] bcm54xx_config_init
[   24.897507] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   24.903523] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  158.296473] random: nonblocking pool is initialized
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri May  8 15:27:59 CST 2020 type: Antminer S9 (vnish 3.8.6)
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Checking fans!
1 fan ok
2 fan ok
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0xff
chain[5] PIC need restore ...
Error of set PIC FLASH addr: addr_H=3(ff) addr_L=0(ff) on Chain[5]
After restore: chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
Fix freq=650 Chain[5] voltage_pic=91 value=890
Fix freq=650 Chain[6] voltage_pic=91 value=890
Fix freq=650 Chain[7] voltage_pic=91 value=890
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[5] has 63 asic
Chain[6] has 63 asic
Chain[7] has 63 asic
Chain[5] has no freq in PIC, set default freq=650M
Chain[5] has no core num in PIC
Chain[6] has no freq in PIC, set default freq=650M
Chain[6] has no core num in PIC
Chain[7] has no freq in PIC, set default freq=650M
Chain[7] has no core num in PIC

Set CHIP PowerOff Temp=105C

Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:5 max freq=650
Chain:5 min freq=650

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:6 max freq=650
Chain:6 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:7 max freq=650
Chain:7 min freq=650

max freq = 650
set baud=1
chain[5] temp chip I2C addr=0x98 ID=0x55
chain[6] temp chip I2C addr=0x98 ID=0x55
chain[7] temp chip I2C addr=0x98 ID=0x55
Chain[5] set working voltage=890 [91]
Chain[6] set working voltage=890 [91]
Chain[7] set working voltage=890 [91]
setStartTimePoint total_tv_start_sys=307 total_tv_end_sys=308
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=70.7150 Asic[02]=78.2650 Asic[03]=74.3730 Asic[04]=73.0980 Asic[05]=70.8330 Asic[06]=70.4300 Asic[07]=72.8800 Asic[08]=72.5610
Asic[09]=73.7190 Asic[10]=67.0240 Asic[11]=76.2180 Asic[12]=71.1180 Asic[13]=76.5370 Asic[14]=75.1280 Asic[15]=74.6080 Asic[16]=71.2190
Asic[17]=70.8500 Asic[18]=73.0810 Asic[19]=73.9030 Asic[20]=74.2720 Asic[21]=71.5880 Asic[22]=76.0000 Asic[23]=78.0810 Asic[24]=73.2660
Asic[25]=71.9570 Asic[26]=76.4030 Asic[27]=75.5640 Asic[28]=75.4470 Asic[29]=82.0740 Asic[30]=65.0450 Asic[31]=73.0810 Asic[32]=76.4200
Asic[33]=69.7760 Asic[34]=80.8660 Asic[35]=72.0410 Asic[36]=71.5380 Asic[37]=71.1180 Asic[38]=72.7790 Asic[39]=66.9910 Asic[40]=76.1010
Asic[41]=73.5170 Asic[42]=71.5880 Asic[43]=70.7990 Asic[44]=76.7220 Asic[45]=77.9460 Asic[46]=76.5200 Asic[47]=73.0640 Asic[48]=72.1920
Asic[49]=77.5940 Asic[50]=69.5910 Asic[51]=73.2490 Asic[52]=74.9430 Asic[53]=75.4300 Asic[54]=74.8260 Asic[55]=78.6510 Asic[56]=74.6250
Asic[57]=83.1140 Asic[58]=72.8290 Asic[59]=78.7350 Asic[60]=75.7650 Asic[61]=71.8230 Asic[62]=75.3460 Asic[63]=73.5000

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=73.2150 Asic[02]=69.3900 Asic[03]=72.4770 Asic[04]=74.3560 Asic[05]=68.8530 Asic[06]=73.9030 Asic[07]=77.3420 Asic[08]=68.6350
Asic[09]=72.7620 Asic[10]=68.0810 Asic[11]=68.6180 Asic[12]=69.5410 Asic[13]=76.4030 Asic[14]=76.7220 Asic[15]=70.0610 Asic[16]=74.4400
Asic[17]=74.3560 Asic[18]=74.2550 Asic[19]=71.5210 Asic[20]=76.7220 Asic[21]=69.7420 Asic[22]=66.1690 Asic[23]=71.5210 Asic[24]=77.6610
Asic[25]=66.7220 Asic[26]=67.1420 Asic[27]=73.2490 Asic[28]=69.6420 Asic[29]=81.4190 Asic[30]=73.0640 Asic[31]=71.5540 Asic[32]=71.7720
Asic[33]=69.4240 Asic[34]=74.6410 Asic[35]=76.4530 Asic[36]=72.9970 Asic[37]=69.7760 Asic[38]=74.9100 Asic[39]=75.5640 Asic[40]=77.1240
Asic[41]=69.4740 Asic[42]=68.5180 Asic[43]=74.6250 Asic[44]=69.7090 Asic[45]=73.9870 Asic[46]=73.9370 Asic[47]=70.1950 Asic[48]=74.1380
Asic[49]=70.3800 Asic[50]=75.0780 Asic[51]=70.4810 Asic[52]=70.4640 Asic[53]=68.9370 Asic[54]=71.9570 Asic[55]=69.9270 Asic[56]=76.8220
Asic[57]=78.1480 Asic[58]=77.3090 Asic[59]=78.8520 Asic[60]=71.9570 Asic[61]=76.7220 Asic[62]=74.5740 Asic[63]=76.6380

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000
Asic[09]=0.00000 Asic[10]=503.316 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000
Asic[17]=0.00000 Asic[18]=402.653 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Check Chain[5] ASIC RT error: (asic index start from 1-63)
Check Chain[6] ASIC RT error: (asic index start from 1-63)
Check Chain[7] ASIC RT error: (asic index start from 1-63)
Asic[10]=503.316000
Asic[18]=402.653000
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=27
Chain[5] Chip[62] local Temp=77
Chain[5] Chip[62] middle Temp=85
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=27
Chain[6] Chip[62] local Temp=75
Chain[6] Chip[62] middle Temp=87
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=27
Chain[7] Chip[62] local Temp=0
Chain[7] Chip[62] middle Temp=0
Done read temp on Chain[7]
set FAN speed according to: temp_highest=87 temp_top1[PWM_T]=87 temp_top1[TEMP_POS_LOCAL]=77 temp_change=0 fix_fan_steps=0
FAN PWM: 94
read_temp_func Done!
CRC error counter=15

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000016] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000310] ps7-ttc #0 at df804000, irq=43
[    0.000622] Console: colour dummy device 80x30
[    0.000653] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040207] pid_max: default: 32768 minimum: 301
[    0.040434] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040454] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042642] CPU: Testing write buffer coherency: ok
[    0.042994] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043056] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.043277] L310 cache controller enabled
[    0.043297] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121039] CPU1: Booted secondary processor
[    0.210228] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210362] Brought up 2 CPUs
[    0.210382] SMP: Total of 2 processors activated.
[    0.210390] CPU: All CPU(s) started in SVC mode.
[    0.211064] devtmpfs: initialized
[    0.213500] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214759] regulator-dummy: no parameters
[    0.223740] NET: Registered protocol family 16
[    0.226049] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.228364] cpuidle: using governor ladder
[    0.228377] cpuidle: using governor menu
[    0.235881] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.237411] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.237424] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.237547] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.259560] bio: create slab <bio-0> at 0
[    0.262357] vgaarb: loaded
[    0.263085] SCSI subsystem initialized
[    0.263983] usbcore: registered new interface driver usbfs
[    0.264155] usbcore: registered new interface driver hub
[    0.264383] usbcore: registered new device driver usb
[    0.264909] media: Linux media interface: v0.10
[    0.265067] Linux video capture interface: v2.00
[    0.265314] pps_core: LinuxPPS API ver. 1 registered
[    0.265326] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.265454] PTP clock support registered
[    0.265812] EDAC MC: Ver: 3.0.0
[    0.266857] Advanced Linux Sound Architecture Driver Initialized.
[    0.269830] DMA-API: preallocated 4096 debug entries
[    0.269845] DMA-API: debugging enabled by kernel config
[    0.269935] Switched to clocksource arm_global_timer
[    0.289818] NET: Registered protocol family 2
[    0.290575] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.290634] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.290719] TCP: Hash tables configured (established 4096 bind 4096)
[    0.290769] TCP: reno registered
[    0.290787] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.290821] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.291093] NET: Registered protocol family 1
[    0.291460] RPC: Registered named UNIX socket transport module.
[    0.291474] RPC: Registered udp transport module.
[    0.291483] RPC: Registered tcp transport module.
[    0.291491] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.291505] PCI: CLS 0 bytes, default 64
[    0.291983] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.294077] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.296223] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.296413] msgmni has been set to 967
[    0.297220] io scheduler noop registered
[    0.297233] io scheduler deadline registered
[    0.297276] io scheduler cfq registered (default)
[    0.309474] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.309494] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.435363] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.003656] console [ttyPS0] enabled
[    1.007972] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.015645] [drm] Initialized drm 1.1.0 20060810
[    1.032892] brd: module loaded
[    1.042386] loop: module loaded
[    1.052278] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.058027] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.065923] libphy: XEMACPS mii bus: probed
[    1.070507] ------------- phy_id = 0x3625e62
[    1.075263] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.083997] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.090701] ehci-pci: EHCI PCI platform driver
[    1.097916] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.104760] usbcore: registered new interface driver usb-storage
[    1.111650] mousedev: PS/2 mouse device common for all mice
[    1.117784] i2c /dev entries driver
[    1.124770] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.130319] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.136210] Xilinx Zynq CpuIdle Driver started
[    1.141117] sdhci: Secure Digital Host Controller Interface driver
[    1.147213] sdhci: Copyright(c) Pierre Ossman
[    1.151580] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.158357] mmc0: no vqmmc regulator found
[    1.162450] mmc0: no vmmc regulator found
[    1.199951] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.208644] usbcore: registered new interface driver usbhid
[    1.214156] usbhid: USB HID core driver
[    1.218893] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.225193] nand: Micron MT29F2G08ABAEAWP
[    1.229156] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.235098] Bad block table found at page 131008, version 0x01
[    1.241324] Bad block table found at page 130944, version 0x01
[    1.247379] 3 ofpart partitions found on MTD device pl353-nand
[    1.253167] Creating 3 MTD partitions on "pl353-nand":
[    1.258256] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.266346] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.273680] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.282703] TCP: cubic registered
[    1.285942] NET: Registered protocol family 17
[    1.290659] Registering SWP/SWPB emulation handler
[    1.296560] regulator-dummy: disabling
[    1.300969] UBI: attaching mtd1 to ubi0
[    1.826753] UBI: scanning is finished
[    1.838427] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.845508] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.852268] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.858932] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.865810] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.871790] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.878898] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 916511165
[    1.887854] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.897071] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.897077] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.901156] ALSA device list:
[    1.901159]   No soundcards found.
[    1.917530] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.946536] UBIFS: recovery needed
[    2.022678] UBIFS: recovery completed
[    2.026352] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.032296] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.041408] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.051290] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.056320] UBIFS: media format: w4/r0 (latest is w4/r0), UUID BBDF9B01-1A34-456B-9FBF-33B446951E64, small LPT model
[    2.067629] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.074609] devtmpfs: mounted
[    2.077718] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.919561] random: dd urandom read with 0 bits of entropy available
[    3.319974]
[    3.319974] bcm54xx_config_init
[    3.929980]
[    3.929980] bcm54xx_config_init
[    6.930790] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    6.936884] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   19.870806] In axi fpga driver!
[   19.873884] request_mem_region OK!
[   19.877268] AXI fpga dev virtual address is 0xdf9fc000
[   19.882408] *base_vir_addr = 0x8c510
[   19.897707] In fpga mem driver!
[   19.900910] request_mem_region OK!
[   19.904416] fpga mem virtual address is 0xe2000000
[   20.699977]
[   20.699977] bcm54xx_config_init
[   21.329947]
[   21.329947] bcm54xx_config_init
[   24.330810] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   24.336832] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  201.665143] random: nonblocking pool is initialized
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 806c6d8113758854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[11] has core num=4
Check chain[5] PIC fw version=0x03
chain[6]: [63:22] [63:5] [63:24] [63:24] [63:84] [63:54] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[12] has core num=2
Chain[6] ASIC[17] has core num=1
Chain[6] ASIC[44] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:24] [63:64] [63:18] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[30] has core num=15
Chain[7] ASIC[38] has core num=2
Chain[7] ASIC[43] has core num=15
Check chain[7] PIC fw version=0x03
get PIC voltage=125 on chain[5], value=870
get PIC voltage=125 on chain[6], value=870
get PIC voltage=125 on chain[7], value=870
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,36,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,36,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1377 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Jul 21 05:15:25 EDT 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 806c6d8113758854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=6360
get fan[2] speed=6360
get fan[2] speed=6360
get fan[2] speed=6360
get fan[2] speed=6360
get fan[2] speed=6360
get fan[5] speed=13440
get fan[2] speed=6360
get fan[5] speed=13440
get fan[2] speed=6360
get fan[5] speed=13440
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: use lower voltage on searching freq!
Chain[J6] has backup chain_voltage=870
Check chain[5] PIC fw version=0x03
chain[6]: [63:22] [63:5] [63:24] [63:24] [63:84] [63:54] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: use lower voltage on searching freq!
Chain[J7] has backup chain_voltage=870
Check chain[6] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:24] [63:64] [63:18] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: use lower voltage on searching freq!
Chain[J8] has backup chain_voltage=870
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=125 value=870
Chain[J7] orignal chain_voltage_pic=125 value=870
Chain[J8] orignal chain_voltage_pic=125 value=870
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[11] has core num=4
Chain[J7] has core num in PIC
Chain[J7] ASIC[12] has core num=2
Chain[J7] ASIC[17] has core num=1
Chain[J7] ASIC[44] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[30] has core num=15
Chain[J8] ASIC[38] has core num=2
Chain[J8] ASIC[43] has core num=15
miner total rate=14064GH/s fixed rate=14000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:5 max freq=662
Chain:5 min freq=662

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:6 max freq=662
Chain:6 min freq=662

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=656
Asic[ 0]:656
Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 Asic[ 8]:656
Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:656 Asic[13]:656 Asic[14]:656 Asic[15]:656 Asic[16]:656
Asic[17]:656 Asic[18]:656 Asic[19]:656 Asic[20]:656 Asic[21]:656 Asic[22]:656 Asic[23]:656 Asic[24]:656
Asic[25]:656 Asic[26]:656 Asic[27]:656 Asic[28]:656 Asic[29]:656 Asic[30]:656 Asic[31]:656 Asic[32]:656
Asic[33]:656 Asic[34]:656 Asic[35]:656 Asic[36]:656 Asic[37]:656 Asic[38]:656 Asic[39]:656 Asic[40]:656
Asic[41]:656 Asic[42]:656 Asic[43]:656 Asic[44]:656 Asic[45]:656 Asic[46]:656 Asic[47]:656 Asic[48]:656
Asic[49]:656 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656
Chain:7 max freq=656
Chain:7 min freq=656


Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:5 max freq=662
Chain:5 min freq=662

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:6 max freq=662
Chain:6 min freq=662

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=656
Asic[ 0]:656
Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 Asic[ 8]:656
Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:656 Asic[13]:656 Asic[14]:656 Asic[15]:656 Asic[16]:656
Asic[17]:656 Asic[18]:656 Asic[19]:656 Asic[20]:656 Asic[21]:656 Asic[22]:656 Asic[23]:656 Asic[24]:656
Asic[25]:656 Asic[26]:656 Asic[27]:656 Asic[28]:656 Asic[29]:656 Detect a bad chip=30 on chain[7], fixed to 400M
Asic[30]:656 Asic[31]:656 Asic[32]:656
Asic[33]:656 Asic[34]:656 Asic[35]:656 Asic[36]:656 Asic[37]:656 Asic[38]:656 Asic[39]:656 Asic[40]:656
Asic[41]:656 Asic[42]:656 Detect a bad chip=43 on chain[7], fixed to 400M
Asic[43]:656 Asic[44]:656 Asic[45]:656 Asic[46]:656 Asic[47]:656 Asic[48]:656
Asic[49]:656 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656
Chain:7 max freq=656
Chain:7 min freq=656

max freq = 662
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,36,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:39 remote:37 offset:33
Chain[J6] chip[244] get middle temp offset=33 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,36,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:39 remote:37 offset:33
Chain[J7] chip[244] get middle temp offset=33 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=00
Warning: Chain[J8] has no temp offset in PIC! will fix it
Warning: Chain[7] chip[244] local:-64 remote:0 offset:-42, will fixed offset=27
New offset Chain[7] chip[244] local:-64 remote:0 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=00
single board rate=4751 voltage limit=870 on chain[5]
get PIC voltage=870 on chain[5], check: must be < 870
single board rate=4751 voltage limit=870 on chain[6]
get PIC voltage=870 on chain[6], check: must be < 870
single board rate=4560 voltage limit=890 on chain[7]
get PIC voltage=870 on chain[7], check: must be < 890
Chain[J6] set working voltage=870 [125]
Chain[J7] set working voltage=870 [125]
Chain[J8] set working voltage=870 [125]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=33
read failed, old value: Chain[5] Chip[62] local Temp=70
read failed on Chain[5] Chip[62] middle Temp old value:85
Special fix Chain[5] Chip[62] middle Temp = 85
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=33
read failed, old value: Chain[6] Chip[62] local Temp=0
read failed on Chain[6] Chip[62] middle Temp old value:15
Special fix Chain[6] Chip[62] middle Temp = 15
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=00 middle offset=27
read failed, old value: Chain[7] Chip[62] local Temp=0
read failed on Chain[7] Chip[62] middle Temp old value:15
Special fix Chain[7] Chip[62] middle Temp = 15
Done read temp on Chain[7]
Set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=0

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000309] ps7-ttc #0 at df804000, irq=43
[    0.000623] Console: colour dummy device 80x30
[    0.000653] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040206] pid_max: default: 32768 minimum: 301
[    0.040431] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040450] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042625] CPU: Testing write buffer coherency: ok
[    0.042969] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043029] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.043252] L310 cache controller enabled
[    0.043271] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121035] CPU1: Booted secondary processor
[    0.210227] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210361] Brought up 2 CPUs
[    0.210380] SMP: Total of 2 processors activated.
[    0.210389] CPU: All CPU(s) started in SVC mode.
[    0.211061] devtmpfs: initialized
[    0.213493] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214748] regulator-dummy: no parameters
[    0.223760] NET: Registered protocol family 16
[    0.225969] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.228300] cpuidle: using governor ladder
[    0.228314] cpuidle: using governor menu
[    0.235868] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.237376] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.237392] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.237501] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.259626] bio: create slab <bio-0> at 0
[    0.261249] vgaarb: loaded
[    0.261977] SCSI subsystem initialized
[    0.262903] usbcore: registered new interface driver usbfs
[    0.263080] usbcore: registered new interface driver hub
[    0.263318] usbcore: registered new device driver usb
[    0.263861] media: Linux media interface: v0.10
[    0.264020] Linux video capture interface: v2.00
[    0.264264] pps_core: LinuxPPS API ver. 1 registered
[    0.264275] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.264400] PTP clock support registered
[    0.264766] EDAC MC: Ver: 3.0.0
[    0.265862] Advanced Linux Sound Architecture Driver Initialized.
[    0.268843] DMA-API: preallocated 4096 debug entries
[    0.268859] DMA-API: debugging enabled by kernel config
[    0.268949] Switched to clocksource arm_global_timer
[    0.290490] NET: Registered protocol family 2
[    0.291168] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.291226] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.291311] TCP: Hash tables configured (established 4096 bind 4096)
[    0.291359] TCP: reno registered
[    0.291377] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.291410] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.291654] NET: Registered protocol family 1
[    0.292008] RPC: Registered named UNIX socket transport module.
[    0.292021] RPC: Registered udp transport module.
[    0.292029] RPC: Registered tcp transport module.
[    0.292037] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.292052] PCI: CLS 0 bytes, default 64
[    0.292508] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.294564] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.296748] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.296938] msgmni has been set to 967
[    0.297765] io scheduler noop registered
[    0.297778] io scheduler deadline registered
[    0.297817] io scheduler cfq registered (default)
[    0.305609] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.305629] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.430632] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.998359] console [ttyPS0] enabled
[    1.002655] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.010320] [drm] Initialized drm 1.1.0 20060810
[    1.027402] brd: module loaded
[    1.036868] loop: module loaded
[    1.046446] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.052592] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.060604] libphy: XEMACPS mii bus: probed
[    1.064971] ------------- phy_id = 0x3625e62
[    1.069887] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.078479] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.085141] ehci-pci: EHCI PCI platform driver
[    1.092424] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.099283] usbcore: registered new interface driver usb-storage
[    1.106152] mousedev: PS/2 mouse device common for all mice
[    1.112327] i2c /dev entries driver
[    1.119251] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.124742] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.130667] Xilinx Zynq CpuIdle Driver started
[    1.135513] sdhci: Secure Digital Host Controller Interface driver
[    1.141704] sdhci: Copyright(c) Pierre Ossman
[    1.145971] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.152797] mmc0: no vqmmc regulator found
[    1.156807] mmc0: no vmmc regulator found
[    1.198965] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.207684] usbcore: registered new interface driver usbhid
[    1.213192] usbhid: USB HID core driver
[    1.217927] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.224224] nand: Micron MT29F2G08ABAEAWP
[    1.228191] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.234128] Bad block table found at page 131008, version 0x01
[    1.240348] Bad block table found at page 130944, version 0x01
[    1.246405] 3 ofpart partitions found on MTD device pl353-nand
[    1.252196] Creating 3 MTD partitions on "pl353-nand":
[    1.257282] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.265357] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.272701] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.281709] TCP: cubic registered
[    1.284942] NET: Registered protocol family 17
[    1.289677] Registering SWP/SWPB emulation handler
[    1.295588] regulator-dummy: disabling
[    1.299979] UBI: attaching mtd1 to ubi0
[    1.825729] UBI: scanning is finished
[    1.837439] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.844525] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.851286] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.857950] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.864829] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.870809] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.877916] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 916511165
[    1.886872] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.896089] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.896094] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.900189] ALSA device list:
[    1.900193]   No soundcards found.
[    1.916553] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.945646] UBIFS: recovery needed
[    2.035575] UBIFS: recovery completed
[    2.039266] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.045191] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.054355] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.064212] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.069250] UBIFS: media format: w4/r0 (latest is w4/r0), UUID BBDF9B01-1A34-456B-9FBF-33B446951E64, small LPT model
[    2.080307] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.087020] devtmpfs: mounted
[    2.090160] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.928509] random: dd urandom read with 0 bits of entropy available
[    3.318993]
[    3.318993] bcm54xx_config_init
[    3.928992]
[    3.928992] bcm54xx_config_init
[    6.929810] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    6.935900] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   19.841046] In axi fpga driver!
[   19.844115] request_mem_region OK!
[   19.847507] AXI fpga dev virtual address is 0xdf9fc000
[   19.852641] *base_vir_addr = 0x8c510
[   19.867898] In fpga mem driver!
[   19.871130] request_mem_region OK!
[   19.874631] fpga mem virtual address is 0xe2000000
[   20.678964]
[   20.678964] bcm54xx_config_init
[   21.308960]
[   21.308960] bcm54xx_config_init
[   24.309829] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   24.315848] xemacps e000b000.ps7-ethernet: link up (100/FULL)
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 806c6d8113758854
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[11] has core num=4
Check chain[5] PIC fw version=0x03
chain[6]: [63:22] [63:5] [63:24] [63:24] [63:84] [63:54] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[12] has core num=2
Chain[6] ASIC[17] has core num=1
Chain[6] ASIC[44] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:24] [63:64] [63:18] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[30] has core num=15
Chain[7] ASIC[38] has core num=2
Chain[7] ASIC[43] has core num=15
Check chain[7] PIC fw version=0x03
get PIC voltage=125 on chain[5], value=870
get PIC voltage=125 on chain[6], value=870
get PIC voltage=125 on chain[7], value=870
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,36,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,36,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1376 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Jul 21 05:15:25 EDT 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 806c6d8113758854
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=6360
get fan[2] speed=6360
get fan[2] speed=6360
get fan[2] speed=6360
get fan[2] speed=6360
get fan[2] speed=6360
get fan[5] speed=13440
get fan[2] speed=6360
get fan[5] speed=13440
get fan[2] speed=6360
get fan[5] speed=13440
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: use lower voltage on searching freq!
Chain[J6] has backup chain_voltage=870
Check chain[5] PIC fw version=0x03
chain[6]: [63:22] [63:5] [63:24] [63:24] [63:84] [63:54] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: use lower voltage on searching freq!
Chain[J7] has backup chain_voltage=870
Check chain[6] PIC fw version=0x03
chain[7]: [63:22] [63:5] [63:24] [63:24] [63:64] [63:18] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: use lower voltage on searching freq!
Chain[J8] has backup chain_voltage=870
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=125 value=870
Chain[J7] orignal chain_voltage_pic=125 value=870
Chain[J8] orignal chain_voltage_pic=125 value=870
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[11] has core num=4
Chain[J7] has core num in PIC
Chain[J7] ASIC[12] has core num=2
Chain[J7] ASIC[17] has core num=1
Chain[J7] ASIC[44] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[30] has core num=15
Chain[J8] ASIC[38] has core num=2
Chain[J8] ASIC[43] has core num=15
miner total rate=14064GH/s fixed rate=14000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:5 max freq=662
Chain:5 min freq=662

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:6 max freq=662
Chain:6 min freq=662

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=656
Asic[ 0]:656
Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 Asic[ 8]:656
Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:656 Asic[13]:656 Asic[14]:656 Asic[15]:656 Asic[16]:656
Asic[17]:656 Asic[18]:656 Asic[19]:656 Asic[20]:656 Asic[21]:656 Asic[22]:656 Asic[23]:656 Asic[24]:656
Asic[25]:656 Asic[26]:656 Asic[27]:656 Asic[28]:656 Asic[29]:656 Asic[30]:656 Asic[31]:656 Asic[32]:656
Asic[33]:656 Asic[34]:656 Asic[35]:656 Asic[36]:656 Asic[37]:656 Asic[38]:656 Asic[39]:656 Asic[40]:656
Asic[41]:656 Asic[42]:656 Asic[43]:656 Asic[44]:656 Asic[45]:656 Asic[46]:656 Asic[47]:656 Asic[48]:656
Asic[49]:656 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656
Chain:7 max freq=656
Chain:7 min freq=656


Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:5 max freq=662
Chain:5 min freq=662

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:6 max freq=662
Chain:6 min freq=662

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=656
Asic[ 0]:656
Asic[ 1]:656 Asic[ 2]:656 Asic[ 3]:656 Asic[ 4]:656 Asic[ 5]:656 Asic[ 6]:656 Asic[ 7]:656 Asic[ 8]:656
Asic[ 9]:656 Asic[10]:656 Asic[11]:656 Asic[12]:656 Asic[13]:656 Asic[14]:656 Asic[15]:656 Asic[16]:656
Asic[17]:656 Asic[18]:656 Asic[19]:656 Asic[20]:656 Asic[21]:656 Asic[22]:656 Asic[23]:656 Asic[24]:656
Asic[25]:656 Asic[26]:656 Asic[27]:656 Asic[28]:656 Asic[29]:656 Detect a bad chip=30 on chain[7], fixed to 400M
Asic[30]:656 Asic[31]:656 Asic[32]:656
Asic[33]:656 Asic[34]:656 Asic[35]:656 Asic[36]:656 Asic[37]:656 Asic[38]:656 Asic[39]:656 Asic[40]:656
Asic[41]:656 Asic[42]:656 Detect a bad chip=43 on chain[7], fixed to 400M
Asic[43]:656 Asic[44]:656 Asic[45]:656 Asic[46]:656 Asic[47]:656 Asic[48]:656
Asic[49]:656 Asic[50]:656 Asic[51]:656 Asic[52]:656 Asic[53]:656 Asic[54]:656 Asic[55]:656 Asic[56]:656
Asic[57]:656 Asic[58]:656 Asic[59]:656 Asic[60]:656 Asic[61]:656 Asic[62]:656
Chain:7 max freq=656
Chain:7 min freq=656

max freq = 662
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,36,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:41 remote:39 offset:33
Chain[J6] chip[244] get middle temp offset=33 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,36,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=00

freq[00]=656 freq[01]=656 freq[02]=656 freq[03]=656 freq[04]=656 freq[05]=656 freq[06]=656 freq[07]=656
freq[08]=656 freq[09]=656 freq[10]=656 freq[11]=656 freq[12]=656 freq[13]=656 freq[14]=656 freq[15]=656
freq[16]=656 freq[17]=656 freq[18]=656 freq[19]=656 freq[20]=656 freq[21]=656 freq[22]=656 freq[23]=656
freq[24]=656 freq[25]=656 freq[26]=656 freq[27]=656 freq[28]=656 freq[29]=656 freq[30]=656 freq[31]=656
freq[32]=656 freq[33]=656 freq[34]=656 freq[35]=656 freq[36]=656 freq[37]=656 freq[38]=656 freq[39]=656
freq[40]=656 freq[41]=656 freq[42]=656 freq[43]=656 freq[44]=656 freq[45]=656 freq[46]=656 freq[47]=656
freq[48]=656 freq[49]=656 freq[50]=656 freq[51]=656 freq[52]=656 freq[53]=656 freq[54]=656 freq[55]=656
freq[56]=656 freq[57]=656 freq[58]=656 freq[59]=656 freq[60]=656 freq[61]=656 freq[62]=656

total valid nonce number:0
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:0
last_nonce_num:0
chain[5]: some chip cores are not opened FAILED!
Test Patten on chain[5]: FAILED!
chain[6]: some chip cores are not opened FAILED!
Test Patten on chain[6]: FAILED!
chain[7]: some chip cores are not opened FAILED!
Test Patten on chain[7]: FAILED!
do heat board 8xPatten for 2 times
do open core on Chain[5]...
Done open core on Chain[5]!
do open core on Chain[6]...
Done open core on Chain[6]!
do open core on Chain[7]...
Done open core on Chain[7]!
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=33
read failed, old value: Chain[5] Chip[62] local Temp=65
read failed on Chain[5] Chip[62] middle Temp old value:80
Special fix Chain[5] Chip[62] middle Temp = 80
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=00 middle offset=27
read failed, old value: Chain[6] Chip[62] local Temp=0
read failed on Chain[6] Chip[62] middle Temp old value:15
Special fix Chain[6] Chip[62] middle Temp = 15
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=00 middle offset=27
read failed, old value: Chain[7] Chip[62] local Temp=0
read failed on Chain[7] Chip[62] middle Temp old value:15
Special fix Chain[7] Chip[62] middle Temp = 15
Done read temp on Chain[7]
Set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=0

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000298] ps7-ttc #0 at df804000, irq=43
[    0.000604] Console: colour dummy device 80x30
[    0.000633] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090244] pid_max: default: 32768 minimum: 301
[    0.090453] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090472] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.092650] CPU: Testing write buffer coherency: ok
[    0.092968] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.093025] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.093245] L310 cache controller enabled
[    0.093264] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.170988] CPU1: Booted secondary processor
[    0.260221] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260351] Brought up 2 CPUs
[    0.260370] SMP: Total of 2 processors activated.
[    0.260378] CPU: All CPU(s) started in SVC mode.
[    0.261037] devtmpfs: initialized
[    0.263466] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264665] regulator-dummy: no parameters
[    0.272056] NET: Registered protocol family 16
[    0.274335] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.276606] cpuidle: using governor ladder
[    0.276619] cpuidle: using governor menu
[    0.284011] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.285536] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.285549] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.285661] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.307462] bio: create slab <bio-0> at 0
[    0.308856] vgaarb: loaded
[    0.309553] SCSI subsystem initialized
[    0.310557] usbcore: registered new interface driver usbfs
[    0.310737] usbcore: registered new interface driver hub
[    0.310959] usbcore: registered new device driver usb
[    0.311488] media: Linux media interface: v0.10
[    0.311645] Linux video capture interface: v2.00
[    0.311881] pps_core: LinuxPPS API ver. 1 registered
[    0.311893] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.312014] PTP clock support registered
[    0.312396] EDAC MC: Ver: 3.0.0
[    0.313581] Advanced Linux Sound Architecture Driver Initialized.
[    0.316334] DMA-API: preallocated 4096 debug entries
[    0.316348] DMA-API: debugging enabled by kernel config
[    0.316426] Switched to clocksource arm_global_timer
[    0.336923] NET: Registered protocol family 2
[    0.337559] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.337615] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.337700] TCP: Hash tables configured (established 4096 bind 4096)
[    0.337746] TCP: reno registered
[    0.337763] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.337795] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.338033] NET: Registered protocol family 1
[    0.338368] RPC: Registered named UNIX socket transport module.
[    0.338381] RPC: Registered udp transport module.
[    0.338389] RPC: Registered tcp transport module.
[    0.338397] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.338409] PCI: CLS 0 bytes, default 64
[    0.338839] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.340822] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.342922] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.343108] msgmni has been set to 967
[    0.343861] io scheduler noop registered
[    0.343873] io scheduler deadline registered
[    0.343911] io scheduler cfq registered (default)
[    0.355054] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.355074] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.479719] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.046714] console [ttyPS0] enabled
[    1.050968] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.058596] [drm] Initialized drm 1.1.0 20060810
[    1.075535] brd: module loaded
[    1.084905] loop: module loaded
[    1.094351] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.100344] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.108356] libphy: XEMACPS mii bus: probed
[    1.112726] ------------- phy_id = 0x3625e62
[    1.117501] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.126109] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.132761] ehci-pci: EHCI PCI platform driver
[    1.139998] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.146825] usbcore: registered new interface driver usb-storage
[    1.153657] mousedev: PS/2 mouse device common for all mice
[    1.159853] i2c /dev entries driver
[    1.166773] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.172262] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.178170] Xilinx Zynq CpuIdle Driver started
[    1.183008] sdhci: Secure Digital Host Controller Interface driver
[    1.189125] sdhci: Copyright(c) Pierre Ossman
[    1.193441] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.200277] mmc0: no vqmmc regulator found
[    1.204294] mmc0: no vmmc regulator found
[    1.246456] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.255143] usbcore: registered new interface driver usbhid
[    1.260658] usbhid: USB HID core driver
[    1.265363] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.271651] nand: Micron MT29F2G08ABAEAWP
[    1.275627] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.281568] Bad block table found at page 131008, version 0x01
[    1.287811] Bad block table found at page 130944, version 0x01
[    1.293861] 3 ofpart partitions found on MTD device pl353-nand
[    1.299636] Creating 3 MTD partitions on "pl353-nand":
[    1.304734] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.312773] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.320098] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.330800] TCP: cubic registered
[    1.334035] NET: Registered protocol family 17
[    1.338729] Registering SWP/SWPB emulation handler
[    1.344643] regulator-dummy: disabling
[    1.348962] UBI: attaching mtd1 to ubi0
[    1.873650] UBI: scanning is finished
[    1.885249] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.892332] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.899094] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.905759] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.912637] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.918617] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.925724] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1113221046
[    1.934767] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.943983] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.943988] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.947995] ALSA device list:
[    1.947999]   No soundcards found.
[    1.964300] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    2.024036] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.029998] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.039101] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.049065] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.054041] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E8A4479F-B15D-4C7A-964D-0F246E2BB6ED, small LPT model
[    2.065570] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.072765] devtmpfs: mounted
[    2.075868] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.918754] random: dd urandom read with 1 bits of entropy available
[    3.196437]
[    3.196437] bcm54xx_config_init
[    4.076444]
[    4.076444] bcm54xx_config_init
[    7.077319] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.083408] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   19.684803] In axi fpga driver!
[   19.687910] request_mem_region OK!
[   19.691261] AXI fpga dev virtual address is 0xdf9fe000
[   19.696367] *base_vir_addr = 0xc51e
[   19.707870] In fpga mem driver!
[   19.712810] request_mem_region OK!
[   19.716370] fpga mem virtual address is 0xe2000000
[   20.486475]
[   20.486475] bcm54xx_config_init
[   21.366461]
[   21.366461] bcm54xx_config_init
[   26.367303] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   26.373318] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  948.626478] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507486208
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6fdd000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5dd6000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 81706d8a79104814
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:9113: Chain[5] ASIC[3] has core num=2
main.c:9113: Chain[5] ASIC[59] has core num=15
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:9113: Chain[6] ASIC[17] has core num=2
main.c:9113: Chain[6] ASIC[19] has core num=1
main.c:9113: Chain[6] ASIC[54] has core num=1
main.c:9113: Chain[6] ASIC[55] has core num=2
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:9113: Chain[7] ASIC[15] has core num=15
main.c:9113: Chain[7] ASIC[35] has core num=5
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=23 on chain[5], value=930
main.c:9183: get PIC voltage=6 on chain[6], value=940
main.c:9183: get PIC voltage=6 on chain[7], value=940
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,39,28
main.c:9366: chain[5] temp chip I2C addr=0x9c
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,39,28
main.c:9366: chain[6] temp chip I2C addr=0x9c
main.c:9372: chain[6] has no middle temp, use special fix mode.
main.c:9349: chain[7] temp offset record: 62,0,0,0,0,0,39,28
main.c:9366: chain[7] temp chip I2C addr=0x9c
main.c:9372: chain[7] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 3
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649:
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 3, total chain num = 3
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found=14900 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
main.c:13927: bmminer not found=  597 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12292:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:18:27 CST 2019 type: Antminer S9
driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 81706d8a79104814
driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=4320
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=4320
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5760
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=4320
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5760
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=4320
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=5760
driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4d 0x00 0x4d 0x04 0x4d 0x0d 0x4d 0x00 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x05 0x4d 0x07 0x4d 0x23 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=3 : 0
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J6] has backup chain_voltage=870
driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x48 0x00 0x48 0x04 0x48 0x08 0x48 0x00 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x05 0x48 0x09 0x48 0x23 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=3 : 0
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J7] has backup chain_voltage=890
driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x49 0x00 0x49 0x04 0x49 0x09 0x49 0x00 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x05 0x49 0x09 0x49 0x23 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=3 : 0
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J8] has backup chain_voltage=890
driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 3
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=23 value=930
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J6] will use backup chain_voltage_pic=870 [125]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J6] get working chain_voltage_pic=125
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=6 value=940
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J7] will use backup chain_voltage_pic=890 [91]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J7] get working chain_voltage_pic=91
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=6 value=940
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J8] will use backup chain_voltage_pic=890 [91]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J8] get working chain_voltage_pic=91
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 63 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 62 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 62 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 63 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:4531:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[3] has core num=2
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[59] has core num=15
driver-btm-c5.c:4531:set_frequency: Chain[J7] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[17] has core num=2
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[19] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[54] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[55] has core num=2
driver-btm-c5.c:4571:set_frequency: miner total rate=9291GH/s ideal_total_hash_rate = 9000GH/s
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4598:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:5 base freq=668
Asic[ 0]:668 Asic[ 1]:668 Asic[ 2]:668 Asic[ 3]:668 Asic[ 4]:668 Asic[ 5]:668 Asic[ 6]:668 Asic[ 7]:668
Asic[ 8]:668 Asic[ 9]:668 Asic[10]:668 Asic[11]:668 Asic[12]:668 Asic[13]:668 Asic[14]:668 Asic[15]:668
Asic[16]:668 Asic[17]:668 Asic[18]:668 Asic[19]:668 Asic[20]:668 Asic[21]:668 Asic[22]:668 Asic[23]:668
Asic[24]:668 Asic[25]:668 Asic[26]:668 Asic[27]:668 Asic[28]:668 Asic[29]:668 Asic[30]:668 Asic[31]:668
Asic[32]:668 Asic[33]:668 Asic[34]:668 Asic[35]:668 Asic[36]:668 Asic[37]:668 Asic[38]:668 Asic[39]:668
Asic[40]:668 Asic[41]:668 Asic[42]:668 Asic[43]:668 Asic[44]:668 Asic[45]:668 Asic[46]:668 Asic[47]:668
Asic[48]:668 Asic[49]:668 Asic[50]:668 Asic[51]:668 Asic[52]:668 Asic[53]:668 Asic[54]:668 Asic[55]:668
Asic[56]:668 Asic[57]:668 Asic[58]:668 Asic[59]:668 Asic[60]:668 Asic[61]:668 Asic[62]:668
driver-btm-c5.c:4809:set_frequency: Chain:5 max freq=668
driver-btm-c5.c:4810:set_frequency: Chain:5 min freq=668

driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[6]
driver-btm-c5.c:4598:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:6 base freq=637
Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637
Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637
Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637
Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637
Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637
Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637
Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637
Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
driver-btm-c5.c:4809:set_frequency: Chain:6 max freq=637
driver-btm-c5.c:4810:set_frequency: Chain:6 min freq=637


driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4855:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:5 base freq=668
Asic[ 0]:668 Asic[ 1]:668 Asic[ 2]:668 Asic[ 3]:668 Asic[ 4]:668 Asic[ 5]:668 Asic[ 6]:668 Asic[ 7]:668
Asic[ 8]:668 Asic[ 9]:668 Asic[10]:668 Asic[11]:668 Asic[12]:668 Asic[13]:668 Asic[14]:668 Asic[15]:668
Asic[16]:668 Asic[17]:668 Asic[18]:668 Asic[19]:668 Asic[20]:668 Asic[21]:668 Asic[22]:668 Asic[23]:668
Asic[24]:668 Asic[25]:668 Asic[26]:668 Asic[27]:668 Asic[28]:668 Asic[29]:668 Asic[30]:668 Asic[31]:668
Asic[32]:668 Asic[33]:668 Asic[34]:668 Asic[35]:668 Asic[36]:668 Asic[37]:668 Asic[38]:668 Asic[39]:668
Asic[40]:668 Asic[41]:668 Asic[42]:668 Asic[43]:668 Asic[44]:668 Asic[45]:668 Asic[46]:668 Asic[47]:668
Asic[48]:668 Asic[49]:668 Asic[50]:668 Asic[51]:668 Asic[52]:668 Asic[53]:668 Asic[54]:668 Asic[55]:668
Asic[56]:668 Asic[57]:668 Asic[58]:668 Asic[59]:668 Asic[60]:668 Asic[61]:668 Asic[62]:668
driver-btm-c5.c:5110:set_frequency: Chain:5 max freq=668
driver-btm-c5.c:5111:set_frequency: Chain:5 min freq=668

driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[6]
driver-btm-c5.c:4855:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:6 base freq=637
Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637
Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637
Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637
Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637
Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637
Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637
Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637
Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637 Asic[62]:637
driver-btm-c5.c:5110:set_frequency: Chain:6 max freq=637
driver-btm-c5.c:5111:set_frequency: Chain:6 min freq=637

driver-btm-c5.c:5119:set_frequency: max freq = 668
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 9291, fixed_totalRate = 9000
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,39,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[6] temp chip I2C addr=0x9c
driver-btm-c5.c:6635:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:35 remote:39 offset:27
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=27 typeID=55
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J7] PIC temp offset: 62,0,0,0,0,0,39,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[7] temp chip I2C addr=0x9c
driver-btm-c5.c:6635:calibration_sensor_offset: chain[7] has no middle temp, use special fix mode.
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[7] chip[244] local:33 remote:36 offset:27
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J7] chip[244] get middle temp offset=27 typeID=55
driver-btm-c5.c:13751:bitmain_c5_init: open core three times
driver-btm-c5.c:13751:bitmain_c5_init: open core three times
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 880
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 870
driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=66428 total_tv_end_sys=66429
driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = 56
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:10487:check_system_work: voltage_check_done
driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 8686.139400, ideal hash rate = 9000
driver-btm-c5.c:10387:check_system_work: hash rate is low...
driver-btm-c5.c:10200:check_avg_rate: avg_rate = 9174, ideal_total_hash_rate = 9000
driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10200:check_avg_rate: avg_rate = 9247, ideal_total_hash_rate = 9000
driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10200:check_avg_rate: avg_rate = 9342, ideal_total_hash_rate = 9000
driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10200:check_avg_rate: avg_rate = 9341, ideal_total_hash_rate = 9000
driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=77.1080 Asic[02]=69.8770 Asic[03]=74.0040 Asic[04]=71.9230 Asic[05]=73.6350 Asic[06]=75.4800 Asic[07]=72.8970 Asic[08]=75.4630
Asic[09]=77.0910 Asic[10]=78.8190 Asic[11]=73.5680 Asic[12]=69.1890 Asic[13]=73.2990 Asic[14]=78.9200 Asic[15]=80.4800 Asic[16]=78.3830
Asic[17]=77.0240 Asic[18]=69.2060 Asic[19]=77.2590 Asic[20]=78.7010 Asic[21]=73.4170 Asic[22]=79.0540 Asic[23]=83.3490 Asic[24]=75.0780
Asic[25]=78.7520 Asic[26]=75.9500 Asic[27]=70.7830 Asic[28]=76.5370 Asic[29]=76.7380 Asic[30]=75.5810 Asic[31]=78.7850 Asic[32]=82.3760
Asic[33]=71.5040 Asic[34]=72.2090 Asic[35]=75.3630 Asic[36]=81.2010 Asic[37]=78.0810 Asic[38]=78.4670 Asic[39]=78.1810 Asic[40]=76.4870
Asic[41]=71.5880 Asic[42]=71.6210 Asic[43]=79.3050 Asic[44]=75.1610 Asic[45]=71.2360 Asic[46]=75.5640 Asic[47]=74.4400 Asic[48]=75.1450
Asic[49]=82.4930 Asic[50]=78.4670 Asic[51]=72.0410 Asic[52]=76.9060 Asic[53]=72.1250 Asic[54]=74.5240 Asic[55]=75.1110 Asic[56]=71.3030
Asic[57]=70.6990 Asic[58]=74.7080 Asic[59]=75.8330 Asic[60]=67.9980 Asic[61]=68.6350 Asic[62]=75.6480 Asic[63]=74.5070

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=70.4970 Asic[02]=67.8300 Asic[03]=75.4130 Asic[04]=76.4030 Asic[05]=70.6820 Asic[06]=70.4300 Asic[07]=72.5110 Asic[08]=69.8600
Asic[09]=71.7220 Asic[10]=73.7190 Asic[11]=72.2250 Asic[12]=76.0510 Asic[13]=71.0340 Asic[14]=79.6910 Asic[15]=68.0650 Asic[16]=73.2320
Asic[17]=77.7620 Asic[18]=74.8930 Asic[19]=75.4630 Asic[20]=72.0240 Asic[21]=70.4130 Asic[22]=74.7590 Asic[23]=71.9570 Asic[24]=73.5000
Asic[25]=73.7690 Asic[26]=74.5070 Asic[27]=71.5210 Asic[28]=69.7590 Asic[29]=71.9570 Asic[30]=75.4970 Asic[31]=77.2590 Asic[32]=69.3900
Asic[33]=72.8630 Asic[34]=76.0170 Asic[35]=76.5040 Asic[36]=72.5270 Asic[37]=71.4870 Asic[38]=74.1550 Asic[39]=68.9710 Asic[40]=72.1750
Asic[41]=74.8090 Asic[42]=71.0510 Asic[43]=76.3360 Asic[44]=72.0740 Asic[45]=73.6180 Asic[46]=64.8270 Asic[47]=72.2420 Asic[48]=73.3660
Asic[49]=78.3160 Asic[50]=72.7790 Asic[51]=74.8930 Asic[52]=65.1120 Asic[53]=73.5510 Asic[54]=75.3460 Asic[55]=70.7150 Asic[56]=70.3460
Asic[57]=74.8430 Asic[58]=69.8930 Asic[59]=72.8630 Asic[60]=73.6010 Asic[61]=71.9230 Asic[62]=76.0510 Asic[63]=73.9200
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=69
Chain[5] Chip[62] junction temperature=56
Special fix Chain[5] Chip[62] middle Temp = 84
Done read temp on Chain[5]
Chain[6] Chip[244] pcb temperature=62
Chain[6] Chip[62] junction temperature=49
Special fix Chain[6] Chip[62] middle Temp = 77
Done read temp on Chain[6]
Max pcb temp : 69
set FAN speed according to: temp_highest=69 temp_top1[PWM_T]=69 temp_top1[TEMP_POS_LOCAL]=69 temp_change=0 fix_fan_steps=0
FAN PWM: 88
read_temp_func Done!
CRC error counter=21358

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000292] ps7-ttc #0 at df804000, irq=43
[    0.000595] Console: colour dummy device 80x30
[    0.000625] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090243] pid_max: default: 32768 minimum: 301
[    0.090453] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090473] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.092630] CPU: Testing write buffer coherency: ok
[    0.092937] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.092994] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.093215] L310 cache controller enabled
[    0.093235] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.170987] CPU1: Booted secondary processor
[    0.260220] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260348] Brought up 2 CPUs
[    0.260366] SMP: Total of 2 processors activated.
[    0.260374] CPU: All CPU(s) started in SVC mode.
[    0.261042] devtmpfs: initialized
[    0.263466] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264650] regulator-dummy: no parameters
[    0.271516] NET: Registered protocol family 16
[    0.273687] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.275951] cpuidle: using governor ladder
[    0.275964] cpuidle: using governor menu
[    0.283358] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.284868] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.284881] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.284990] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.306634] bio: create slab <bio-0> at 0
[    0.308031] vgaarb: loaded
[    0.308728] SCSI subsystem initialized
[    0.309612] usbcore: registered new interface driver usbfs
[    0.309782] usbcore: registered new interface driver hub
[    0.310008] usbcore: registered new device driver usb
[    0.310669] media: Linux media interface: v0.10
[    0.310823] Linux video capture interface: v2.00
[    0.311213] pps_core: LinuxPPS API ver. 1 registered
[    0.311225] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.311355] PTP clock support registered
[    0.311713] EDAC MC: Ver: 3.0.0
[    0.312885] Advanced Linux Sound Architecture Driver Initialized.
[    0.315608] DMA-API: preallocated 4096 debug entries
[    0.315622] DMA-API: debugging enabled by kernel config
[    0.315698] Switched to clocksource arm_global_timer
[    0.337103] NET: Registered protocol family 2
[    0.337740] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.337796] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.337881] TCP: Hash tables configured (established 4096 bind 4096)
[    0.337923] TCP: reno registered
[    0.337939] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.337968] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.338196] NET: Registered protocol family 1
[    0.338524] RPC: Registered named UNIX socket transport module.
[    0.338537] RPC: Registered udp transport module.
[    0.338546] RPC: Registered tcp transport module.
[    0.338554] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.338566] PCI: CLS 0 bytes, default 64
[    0.338989] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.340965] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.343046] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.343236] msgmni has been set to 967
[    0.343985] io scheduler noop registered
[    0.343998] io scheduler deadline registered
[    0.344035] io scheduler cfq registered (default)
[    0.357550] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.357571] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.480482] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.047311] console [ttyPS0] enabled
[    1.051561] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.059187] [drm] Initialized drm 1.1.0 20060810
[    1.076137] brd: module loaded
[    1.085468] loop: module loaded
[    1.094875] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.100854] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.108696] libphy: XEMACPS mii bus: probed
[    1.113063] ------------- phy_id = 0x3625e62
[    1.118017] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.126717] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.133332] ehci-pci: EHCI PCI platform driver
[    1.140559] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.147404] usbcore: registered new interface driver usb-storage
[    1.154230] mousedev: PS/2 mouse device common for all mice
[    1.160356] i2c /dev entries driver
[    1.167323] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.172796] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.178698] Xilinx Zynq CpuIdle Driver started
[    1.183543] sdhci: Secure Digital Host Controller Interface driver
[    1.189665] sdhci: Copyright(c) Pierre Ossman
[    1.193978] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.200858] mmc0: no vqmmc regulator found
[    1.204875] mmc0: no vmmc regulator found
[    1.245719] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.254402] usbcore: registered new interface driver usbhid
[    1.259915] usbhid: USB HID core driver
[    1.264612] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.270914] nand: Micron MT29F2G08ABAEAWP
[    1.274879] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.280812] Bad block table found at page 131008, version 0x01
[    1.287037] Bad block table found at page 130944, version 0x01
[    1.293087] 3 ofpart partitions found on MTD device pl353-nand
[    1.298869] Creating 3 MTD partitions on "pl353-nand":
[    1.303960] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.312004] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.319326] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.330052] TCP: cubic registered
[    1.333287] NET: Registered protocol family 17
[    1.337989] Registering SWP/SWPB emulation handler
[    1.343860] regulator-dummy: disabling
[    1.348194] UBI: attaching mtd1 to ubi0
[    1.873063] UBI: scanning is finished
[    1.884649] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.891732] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.898495] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.905159] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.912036] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.918016] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.925124] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1113221046
[    1.934167] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.943382] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.943387] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.947332] ALSA device list:
[    1.947336]   No soundcards found.
[    1.963664] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    1.992590] UBIFS: recovery needed
[    2.069827] UBIFS: recovery completed
[    2.073491] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.079441] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.088546] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.098435] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.103464] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E8A4479F-B15D-4C7A-964D-0F246E2BB6ED, small LPT model
[    2.114745] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.121936] devtmpfs: mounted
[    2.125039] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.967806] random: dd urandom read with 1 bits of entropy available
[    3.245747]
[    3.245747] bcm54xx_config_init
[    4.125756]
[    4.125756] bcm54xx_config_init
[    8.126583] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    8.132671] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   23.264562] In axi fpga driver!
[   23.267667] request_mem_region OK!
[   23.271021] AXI fpga dev virtual address is 0xdf9fe000
[   23.276149] *base_vir_addr = 0xc51e
[   23.287544] In fpga mem driver!
[   23.292542] request_mem_region OK!
[   23.296151] fpga mem virtual address is 0xe2000000
[   24.055755]
[   24.055755] bcm54xx_config_init
[   24.945720]
[   24.945720] bcm54xx_config_init
[   28.946572] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   28.952595] xemacps e000b000.ps7-ethernet: link up (100/FULL)
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507486208
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6f16000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5d0f000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 81706d8a79104814
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:9113: Chain[5] ASIC[3] has core num=2
main.c:9113: Chain[5] ASIC[59] has core num=15
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:9113: Chain[6] ASIC[17] has core num=2
main.c:9113: Chain[6] ASIC[19] has core num=1
main.c:9113: Chain[6] ASIC[54] has core num=1
main.c:9113: Chain[6] ASIC[55] has core num=2
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:9113: Chain[7] ASIC[15] has core num=15
main.c:9113: Chain[7] ASIC[35] has core num=5
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=125 on chain[5], value=870
main.c:9183: get PIC voltage=91 on chain[6], value=890
main.c:9183: get PIC voltage=6 on chain[7], value=940
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,39,28
main.c:9366: chain[5] temp chip I2C addr=0x9c
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,39,28
main.c:9366: chain[6] temp chip I2C addr=0x9c
main.c:9372: chain[6] has no middle temp, use special fix mode.
main.c:9349: chain[7] temp offset record: 62,0,0,0,0,0,39,28
main.c:9366: chain[7] temp chip I2C addr=0x9c
main.c:9372: chain[7] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 3
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649:
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 3, total chain num = 3
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 1835 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12292:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:18:27 CST 2019 type: Antminer S9
driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 81706d8a79104814
driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x4d 0x00 0x4d 0x04 0x4d 0x0d 0x4d 0x00 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x03 0x4d 0x05 0x4d 0x07 0x4d 0x23 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d 0x00 0x4d
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=3 : 0
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J6] has backup chain_voltage=870
driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x48 0x00 0x48 0x04 0x48 0x08 0x48 0x00 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x03 0x48 0x05 0x48 0x09 0x48 0x23 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48 0x00 0x48
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=3 : 0
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J7] has backup chain_voltage=890
driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x49 0x00 0x49 0x04 0x49 0x09 0x49 0x00 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x05 0x49 0x09 0x49 0x23 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=3 : 0
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J8] has backup chain_voltage=890
driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 3
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=125 value=870
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=91 value=890
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=6 value=940
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J8] will use backup chain_voltage_pic=890 [91]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J8] get working chain_voltage_pic=91
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 63 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 62 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 62 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 62 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 62 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 62 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 62 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 62 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:4531:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[3] has core num=2
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[59] has core num=15
driver-btm-c5.c:4531:set_frequency: Chain[J7] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[17] has core num=2
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[19] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[54] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[55] has core num=2
driver-btm-c5.c:4571:set_frequency: miner total rate=9291GH/s ideal_total_hash_rate = 9000GH/s
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4598:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:5 base freq=668
Asic[ 0]:668 Asic[ 1]:668 Asic[ 2]:668 Asic[ 3]:668 Asic[ 4]:668 Asic[ 5]:668 Asic[ 6]:668 Asic[ 7]:668
Asic[ 8]:668 Asic[ 9]:668 Asic[10]:668 Asic[11]:668 Asic[12]:668 Asic[13]:668 Asic[14]:668 Asic[15]:668
Asic[16]:668 Asic[17]:668 Asic[18]:668 Asic[19]:668 Asic[20]:668 Asic[21]:668 Asic[22]:668 Asic[23]:668
Asic[24]:668 Asic[25]:668 Asic[26]:668 Asic[27]:668 Asic[28]:668 Asic[29]:668 Asic[30]:668 Asic[31]:668
Asic[32]:668 Asic[33]:668 Asic[34]:668 Asic[35]:668 Asic[36]:668 Asic[37]:668 Asic[38]:668 Asic[39]:668
Asic[40]:668 Asic[41]:668 Asic[42]:668 Asic[43]:668 Asic[44]:668 Asic[45]:668 Asic[46]:668 Asic[47]:668
Asic[48]:668 Asic[49]:668 Asic[50]:668 Asic[51]:668 Asic[52]:668 Asic[53]:668 Asic[54]:668 Asic[55]:668
Asic[56]:668 Asic[57]:668 Asic[58]:668 Asic[59]:668 Asic[60]:668 Asic[61]:668 Asic[62]:668
driver-btm-c5.c:4809:set_frequency: Chain:5 max freq=668
driver-btm-c5.c:4810:set_frequency: Chain:5 min freq=668

driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[6]
driver-btm-c5.c:4598:set_frequency: Chain:6 chipnum=62
driver-btm-c5.c:4618:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:6 base freq=637
Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637
Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637
Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637
Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637
Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637
Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637
Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637
Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637
driver-btm-c5.c:4809:set_frequency: Chain:6 max freq=637
driver-btm-c5.c:4810:set_frequency: Chain:6 min freq=637


driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4855:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:5 base freq=668
Asic[ 0]:668 Asic[ 1]:668 Asic[ 2]:668 Asic[ 3]:668 Asic[ 4]:668 Asic[ 5]:668 Asic[ 6]:668 Asic[ 7]:668
Asic[ 8]:668 Asic[ 9]:668 Asic[10]:668 Asic[11]:668 Asic[12]:668 Asic[13]:668 Asic[14]:668 Asic[15]:668
Asic[16]:668 Asic[17]:668 Asic[18]:668 Asic[19]:668 Asic[20]:668 Asic[21]:668 Asic[22]:668 Asic[23]:668
Asic[24]:668 Asic[25]:668 Asic[26]:668 Asic[27]:668 Asic[28]:668 Asic[29]:668 Asic[30]:668 Asic[31]:668
Asic[32]:668 Asic[33]:668 Asic[34]:668 Asic[35]:668 Asic[36]:668 Asic[37]:668 Asic[38]:668 Asic[39]:668
Asic[40]:668 Asic[41]:668 Asic[42]:668 Asic[43]:668 Asic[44]:668 Asic[45]:668 Asic[46]:668 Asic[47]:668
Asic[48]:668 Asic[49]:668 Asic[50]:668 Asic[51]:668 Asic[52]:668 Asic[53]:668 Asic[54]:668 Asic[55]:668
Asic[56]:668 Asic[57]:668 Asic[58]:668 Asic[59]:668 Asic[60]:668 Asic[61]:668 Asic[62]:668
driver-btm-c5.c:5110:set_frequency: Chain:5 max freq=668
driver-btm-c5.c:5111:set_frequency: Chain:5 min freq=668

driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[6]
driver-btm-c5.c:4855:set_frequency: Chain:6 chipnum=62
driver-btm-c5.c:4874:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:6 base freq=637
Asic[ 0]:637 Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637
Asic[ 8]:637 Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637
Asic[16]:637 Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637
Asic[24]:637 Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637
Asic[32]:637 Asic[33]:637 Asic[34]:637 Asic[35]:637 Asic[36]:637 Asic[37]:637 Asic[38]:637 Asic[39]:637
Asic[40]:637 Asic[41]:637 Asic[42]:637 Asic[43]:637 Asic[44]:637 Asic[45]:637 Asic[46]:637 Asic[47]:637
Asic[48]:637 Asic[49]:637 Asic[50]:637 Asic[51]:637 Asic[52]:637 Asic[53]:637 Asic[54]:637 Asic[55]:637
Asic[56]:637 Asic[57]:637 Asic[58]:637 Asic[59]:637 Asic[60]:637 Asic[61]:637
driver-btm-c5.c:5110:set_frequency: Chain:6 max freq=637
driver-btm-c5.c:5111:set_frequency: Chain:6 min freq=637

driver-btm-c5.c:5119:set_frequency: max freq = 668
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 9291, fixed_totalRate = 9000
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,39,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[6] temp chip I2C addr=0x9c
driver-btm-c5.c:6635:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:34 remote:37 offset:28
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=28 typeID=55
driver-btm-c5.c:13751:bitmain_c5_init: open core three times
driver-btm-c5.c:13751:bitmain_c5_init: open core three times
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 880
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 870
driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=210 total_tv_end_sys=211
driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = 54
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:10487:check_system_work: voltage_check_done
driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 8997.667742, ideal hash rate = 9000
driver-btm-c5.c:10382:check_system_work: hash rate is ok now
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=80.8150 Asic[02]=77.6440 Asic[03]=82.1910 Asic[04]=74.1550 Asic[05]=76.4870 Asic[06]=72.9640 Asic[07]=72.9470 Asic[08]=78.6680
Asic[09]=73.3830 Asic[10]=79.6580 Asic[11]=76.1180 Asic[12]=74.4230 Asic[13]=73.6350 Asic[14]=81.6040 Asic[15]=77.9800 Asic[16]=76.2520
Asic[17]=72.9130 Asic[18]=70.1620 Asic[19]=75.0440 Asic[20]=74.5570 Asic[21]=75.9500 Asic[22]=79.3730 Asic[23]=74.9770 Asic[24]=83.1980
Asic[25]=78.3830 Asic[26]=81.2180 Asic[27]=76.8220 Asic[28]=79.2220 Asic[29]=79.4900 Asic[30]=71.5380 Asic[31]=77.2590 Asic[32]=78.4160
Asic[33]=74.1720 Asic[34]=81.6040 Asic[35]=73.0310 Asic[36]=75.2620 Asic[37]=78.5000 Asic[38]=76.8560 Asic[39]=77.0570 Asic[40]=73.2660
Asic[41]=75.8160 Asic[42]=72.6780 Asic[43]=72.5270 Asic[44]=73.8860 Asic[45]=77.6780 Asic[46]=76.8890 Asic[47]=73.7020 Asic[48]=76.5200
Asic[49]=73.5170 Asic[50]=71.8560 Asic[51]=81.9060 Asic[52]=73.3490 Asic[53]=74.1880 Asic[54]=76.3860 Asic[55]=73.7020 Asic[56]=73.9030
Asic[57]=79.4560 Asic[58]=75.2790 Asic[59]=75.6980 Asic[60]=41.4730 Asic[61]=71.6890 Asic[62]=81.5030 Asic[63]=76.4200

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=73.6180 Asic[02]=72.3760 Asic[03]=77.2590 Asic[04]=73.1480 Asic[05]=76.0340 Asic[06]=70.7990 Asic[07]=74.5910 Asic[08]=77.2080
Asic[09]=67.0240 Asic[10]=74.5910 Asic[11]=71.8230 Asic[12]=72.2760 Asic[13]=67.2590 Asic[14]=67.6960 Asic[15]=73.1310 Asic[16]=78.8020
Asic[17]=71.7720 Asic[18]=46.5730 Asic[19]=68.8030 Asic[20]=35.7010 Asic[21]=71.4700 Asic[22]=70.2120 Asic[23]=75.9840 Asic[24]=70.9500
Asic[25]=72.4100 Asic[26]=74.0210 Asic[27]=73.3490 Asic[28]=67.5110 Asic[29]=66.8730 Asic[30]=74.2220 Asic[31]=69.0380 Asic[32]=74.6580
Asic[33]=67.3940 Asic[34]=70.1790 Asic[35]=70.1620 Asic[36]=72.5610 Asic[37]=75.0780 Asic[38]=66.6890 Asic[39]=80.9330 Asic[40]=74.3230
Asic[41]=76.9900 Asic[42]=66.6050 Asic[43]=76.4530 Asic[44]=72.7960 Asic[45]=71.6720 Asic[46]=75.5140 Asic[47]=67.7960 Asic[48]=68.3330
Asic[49]=69.5080 Asic[50]=70.1620 Asic[51]=69.1890 Asic[52]=74.2550 Asic[53]=73.5170 Asic[54]=69.4400 Asic[55]=37.9330 Asic[56]=74.8760
Asic[57]=70.6320 Asic[58]=68.7020 Asic[59]=79.2220 Asic[60]=70.1110 Asic[61]=75.6820 Asic[62]=74.0540 Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=67
Chain[5] Chip[62] junction temperature=55
Special fix Chain[5] Chip[62] middle Temp = 82
Done read temp on Chain[5]
Done read temp on Chain[6]
Max pcb temp : 67
set FAN speed according to: temp_highest=67 temp_top1[PWM_T]=67 temp_top1[TEMP_POS_LOCAL]=67 temp_change=-1 fix_fan_steps=0
FAN PWM: 86
read_temp_func Done!
CRC error counter=60612

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 27800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 258048
[    0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map e6fd8000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 496 pages used for memmap
[    0.000000]   HighMem zone: 63488 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9344 r8192 d15232 u32768
[    0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256528
[    0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 884044K/1032192K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 148148K reserved, 253952K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06e8cf4   (7044 kB)
[    0.000000]       .init : 0xc06e9000 - 0xc071d480   ( 210 kB)
[    0.000000]       .data : 0xc071e000 - 0xc0767058   ( 293 kB)
[    0.000000]        .bss : 0xc0767064 - 0xc07a7d64   ( 260 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to f0004000
[    0.000000] zynq_clock_init: clkc starts at f0004100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000293] ps7-ttc #0 at f0006000, irq=43
[    0.000593] Console: colour dummy device 80x30
[    0.000627] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090243] pid_max: default: 32768 minimum: 301
[    0.090457] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.090478] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.092656] CPU: Testing write buffer coherency: ok
[    0.092979] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.093036] Setting up static identity map for 0x4d3ec0 - 0x4d3f18
[    0.093257] L310 cache controller enabled
[    0.093276] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.170987] CPU1: Booted secondary processor
[    0.260219] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260348] Brought up 2 CPUs
[    0.260366] SMP: Total of 2 processors activated.
[    0.260375] CPU: All CPU(s) started in SVC mode.
[    0.261035] devtmpfs: initialized
[    0.263471] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264657] regulator-dummy: no parameters
[    0.271557] NET: Registered protocol family 16
[    0.273715] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.275978] cpuidle: using governor ladder
[    0.275991] cpuidle: using governor menu
[    0.283382] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.284898] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.284911] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.285018] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[    0.307319] bio: create slab <bio-0> at 0
[    0.308703] vgaarb: loaded
[    0.309403] SCSI subsystem initialized
[    0.310440] usbcore: registered new interface driver usbfs
[    0.310613] usbcore: registered new interface driver hub
[    0.310833] usbcore: registered new device driver usb
[    0.311369] media: Linux media interface: v0.10
[    0.311532] Linux video capture interface: v2.00
[    0.311772] pps_core: LinuxPPS API ver. 1 registered
[    0.311785] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.311915] PTP clock support registered
[    0.312273] EDAC MC: Ver: 3.0.0
[    0.313299] Advanced Linux Sound Architecture Driver Initialized.
[    0.316046] DMA-API: preallocated 4096 debug entries
[    0.316060] DMA-API: debugging enabled by kernel config
[    0.316126] Switched to clocksource arm_global_timer
[    0.335949] NET: Registered protocol family 2
[    0.336986] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.337082] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.337241] TCP: Hash tables configured (established 8192 bind 8192)
[    0.337298] TCP: reno registered
[    0.337316] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.337362] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.338124] NET: Registered protocol family 1
[    0.338489] RPC: Registered named UNIX socket transport module.
[    0.338501] RPC: Registered udp transport module.
[    0.338509] RPC: Registered tcp transport module.
[    0.338518] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.338530] PCI: CLS 0 bytes, default 64
[    0.338955] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.340929] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.342277] bounce pool size: 64 pages
[    0.343162] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.343368] msgmni has been set to 1486
[    0.344125] io scheduler noop registered
[    0.344138] io scheduler deadline registered
[    0.344178] io scheduler cfq registered (default)
[    0.354062] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.354082] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.476245] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.048386] console [ttyPS0] enabled
[    1.052642] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[    1.060267] [drm] Initialized drm 1.1.0 20060810
[    1.077220] brd: module loaded
[    1.086579] loop: module loaded
[    1.095910] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.101707] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.109462] libphy: XEMACPS mii bus: probed
[    1.113834] ------------- phy_id = 0x3625e62
[    1.118751] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.127485] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.134101] ehci-pci: EHCI PCI platform driver
[    1.141364] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.148198] usbcore: registered new interface driver usb-storage
[    1.155042] mousedev: PS/2 mouse device common for all mice
[    1.161172] i2c /dev entries driver
[    1.168115] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.173593] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.179508] Xilinx Zynq CpuIdle Driver started
[    1.184337] sdhci: Secure Digital Host Controller Interface driver
[    1.190578] sdhci: Copyright(c) Pierre Ossman
[    1.194853] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.201683] mmc0: no vqmmc regulator found
[    1.205698] mmc0: no vmmc regulator found
[    1.246173] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.254866] usbcore: registered new interface driver usbhid
[    1.260373] usbhid: USB HID core driver
[    1.265082] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.271386] nand: Micron MT29F2G08ABAEAWP
[    1.275346] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.281292] Bad block table found at page 131008, version 0x01
[    1.287515] Bad block table found at page 130944, version 0x01
[    1.293562] 3 ofpart partitions found on MTD device pl353-nand
[    1.299345] Creating 3 MTD partitions on "pl353-nand":
[    1.304436] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.312466] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.319816] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.328532] nf_conntrack version 0.5.0 (15861 buckets, 63444 max)
[    1.335209] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.340527] TCP: cubic registered
[    1.343762] NET: Registered protocol family 17
[    1.348493] Registering SWP/SWPB emulation handler
[    1.354387] regulator-dummy: disabling
[    1.358756] UBI: attaching mtd1 to ubi0
[    1.884631] UBI: scanning is finished
[    1.896229] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.903282] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.910068] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.916754] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.923593] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.929602] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.936714] UBI: max/mean erase counter: 26/15, WL threshold: 4096, image sequence number: 768485946
[    1.945814] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.955043] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.955049] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.959048] ALSA device list:
[    1.959051]   No soundcards found.
[    1.975324] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    2.004367] UBIFS: recovery needed
[    2.076418] UBIFS: recovery completed
[    2.080092] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.086012] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.095147] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.105031] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.110070] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E215D0B0-FA6F-4ECF-A946-F9E82D00BE06, small LPT model
[    2.121123] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.127873] devtmpfs: mounted
[    2.130981] Freeing unused kernel memory: 208K (c06e9000 - c071d000)
[    2.961701] random: dd urandom read with 0 bits of entropy available
[    3.386141]
[    3.386141] bcm54xx_config_init
[    4.456142]
[    4.456142] bcm54xx_config_init
[    8.457002] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    8.463094] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   23.316604] In axi fpga driver!
[   23.319667] request_mem_region OK!
[   23.323058] AXI fpga dev virtual address is 0xf01fe000
[   23.328191] *base_vir_addr = 0xc51e
[   23.343587] In fpga mem driver!
[   23.346714] request_mem_region OK!
[   23.350222] fpga mem virtual address is 0xf3000000
[   24.155577]
[   24.155577] bcm54xx_config_init
[   25.245458]
[   25.245458] bcm54xx_config_init
[   29.245838] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   29.251859] xemacps e000b000.ps7-ethernet: link up (100/FULL)
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       1039691776
main.c:14025: Detect 1GB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6fcd000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5dc6000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 8134d52e123b885c
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:9113: Chain[5] ASIC[3] has core num=2
main.c:9113: Chain[5] ASIC[59] has core num=15
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:9113: Chain[6] ASIC[15] has core num=15
main.c:9113: Chain[6] ASIC[35] has core num=5
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:9113: Chain[7] ASIC[17] has core num=2
main.c:9113: Chain[7] ASIC[19] has core num=1
main.c:9113: Chain[7] ASIC[54] has core num=1
main.c:9113: Chain[7] ASIC[55] has core num=2
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=23 on chain[5], value=930
main.c:9183: get PIC voltage=23 on chain[6], value=930
main.c:9183: get PIC voltage=6 on chain[7], value=940
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,39,28
main.c:9366: chain[5] temp chip I2C addr=0x9c
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,39,28
main.c:9366: chain[6] temp chip I2C addr=0x9c
main.c:9372: chain[6] has no middle temp, use special fix mode.
main.c:9349: chain[7] temp offset record: 62,0,0,0,0,0,39,28
main.c:9366: chain[7] temp chip I2C addr=0x9c
main.c:9372: chain[7] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 3
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649:
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 3, total chain num = 3
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 1845 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12285:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12328:bitmain_c5_init: Detect 1GB control board of XILINX
driver-btm-c5.c:12355:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12366:bitmain_c5_init: Miner compile time: Tue Jul 30 20:37:39 CST 2019 type: Antminer S9
driver-btm-c5.c:12456:bitmain_c5_init: miner ID : 8134d52e123b885c
driver-btm-c5.c:12613:bitmain_c5_init: Checking fans...
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:3007:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:3007:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:3007:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:3007:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:3007:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:3007:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5760
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5760
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5760
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5760
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5760
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=5880
driver-btm-c5.c:2994:check_fan_beforeInit: Fatal Error: some Fan lost or Fan speed low!

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 27800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 258048
[    0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map e6fd8000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 496 pages used for memmap
[    0.000000]   HighMem zone: 63488 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9344 r8192 d15232 u32768
[    0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256528
[    0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 884044K/1032192K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 148148K reserved, 253952K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06e8cf4   (7044 kB)
[    0.000000]       .init : 0xc06e9000 - 0xc071d480   ( 210 kB)
[    0.000000]       .data : 0xc071e000 - 0xc0767058   ( 293 kB)
[    0.000000]        .bss : 0xc0767064 - 0xc07a7d64   ( 260 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to f0004000
[    0.000000] zynq_clock_init: clkc starts at f0004100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000292] ps7-ttc #0 at f0006000, irq=43
[    0.000592] Console: colour dummy device 80x30
[    0.000628] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040196] pid_max: default: 32768 minimum: 301
[    0.040404] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.040424] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.042612] CPU: Testing write buffer coherency: ok
[    0.042938] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042994] Setting up static identity map for 0x4d3ec0 - 0x4d3f18
[    0.043215] L310 cache controller enabled
[    0.043234] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.120991] CPU1: Booted secondary processor
[    0.210219] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210348] Brought up 2 CPUs
[    0.210367] SMP: Total of 2 processors activated.
[    0.210375] CPU: All CPU(s) started in SVC mode.
[    0.211039] devtmpfs: initialized
[    0.213481] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214668] regulator-dummy: no parameters
[    0.222056] NET: Registered protocol family 16
[    0.224327] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226575] cpuidle: using governor ladder
[    0.226587] cpuidle: using governor menu
[    0.233950] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235471] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235484] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235591] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[    0.257899] bio: create slab <bio-0> at 0
[    0.259282] vgaarb: loaded
[    0.259979] SCSI subsystem initialized
[    0.261026] usbcore: registered new interface driver usbfs
[    0.261270] usbcore: registered new interface driver hub
[    0.261496] usbcore: registered new device driver usb
[    0.262018] media: Linux media interface: v0.10
[    0.262173] Linux video capture interface: v2.00
[    0.262410] pps_core: LinuxPPS API ver. 1 registered
[    0.262422] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.262542] PTP clock support registered
[    0.262891] EDAC MC: Ver: 3.0.0
[    0.263932] Advanced Linux Sound Architecture Driver Initialized.
[    0.266667] DMA-API: preallocated 4096 debug entries
[    0.266680] DMA-API: debugging enabled by kernel config
[    0.266749] Switched to clocksource arm_global_timer
[    0.287065] NET: Registered protocol family 2
[    0.287843] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.287938] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.288097] TCP: Hash tables configured (established 8192 bind 8192)
[    0.288159] TCP: reno registered
[    0.288177] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.288227] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.288481] NET: Registered protocol family 1
[    0.288856] RPC: Registered named UNIX socket transport module.
[    0.288868] RPC: Registered udp transport module.
[    0.288877] RPC: Registered tcp transport module.
[    0.288885] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288898] PCI: CLS 0 bytes, default 64
[    0.289328] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291311] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.292665] bounce pool size: 64 pages
[    0.293536] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293744] msgmni has been set to 1486
[    0.294505] io scheduler noop registered
[    0.294518] io scheduler deadline registered
[    0.294559] io scheduler cfq registered (default)
[    0.308708] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.308729] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.431860] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.003895] console [ttyPS0] enabled
[    1.008154] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[    1.015764] [drm] Initialized drm 1.1.0 20060810
[    1.032686] brd: module loaded
[    1.042064] loop: module loaded
[    1.051591] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.057425] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.065142] libphy: XEMACPS mii bus: probed
[    1.069536] ------------- phy_id = 0x3625e62
[    1.074246] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.083001] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.089658] ehci-pci: EHCI PCI platform driver
[    1.097021] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.103828] usbcore: registered new interface driver usb-storage
[    1.110730] mousedev: PS/2 mouse device common for all mice
[    1.116847] i2c /dev entries driver
[    1.123719] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.129247] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.135114] Xilinx Zynq CpuIdle Driver started
[    1.140007] sdhci: Secure Digital Host Controller Interface driver
[    1.146100] sdhci: Copyright(c) Pierre Ossman
[    1.150463] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.157314] mmc0: no vqmmc regulator found
[    1.161329] mmc0: no vmmc regulator found
[    1.196775] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205457] usbcore: registered new interface driver usbhid
[    1.210960] usbhid: USB HID core driver
[    1.215675] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.221974] nand: Micron MT29F2G08ABAEAWP
[    1.225942] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.231896] Bad block table found at page 131008, version 0x01
[    1.238117] Bad block table found at page 130944, version 0x01
[    1.244167] 3 ofpart partitions found on MTD device pl353-nand
[    1.249953] Creating 3 MTD partitions on "pl353-nand":
[    1.255046] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.263077] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270373] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.279100] nf_conntrack version 0.5.0 (15861 buckets, 63444 max)
[    1.285757] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.291089] TCP: cubic registered
[    1.294324] NET: Registered protocol family 17
[    1.299055] Registering SWP/SWPB emulation handler
[    1.305000] regulator-dummy: disabling
[    1.309374] UBI: attaching mtd1 to ubi0
[    1.835299] UBI: scanning is finished
[    1.846908] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.853966] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.860763] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.867443] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.874277] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.880289] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.887399] UBI: max/mean erase counter: 26/15, WL threshold: 4096, image sequence number: 768485946
[    1.896498] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.905729] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.905736] UBI: background thread "ubi_bgt0d" started, PID 1085
[    1.921902] ALSA device list:
[    1.924783]   No soundcards found.
[    1.929980] UBIFS: background thread "ubifs_bgt0_0" started, PID 1087
[    1.959096] UBIFS: recovery needed
[    2.032363] UBIFS: recovery completed
[    2.036033] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.041980] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.051126] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.060980] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.066006] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E215D0B0-FA6F-4ECF-A946-F9E82D00BE06, small LPT model
[    2.077085] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.083335] devtmpfs: mounted
[    2.086441] Freeing unused kernel memory: 208K (c06e9000 - c071d000)
[    2.924652] random: dd urandom read with 0 bits of entropy available
[    3.346782]
[    3.346782] bcm54xx_config_init
[    4.446801]
[    4.446801] bcm54xx_config_init
[    8.447621] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    8.453711] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   23.335449] In axi fpga driver!
[   23.338542] request_mem_region OK!
[   23.341912] AXI fpga dev virtual address is 0xf01fe000
[   23.347041] *base_vir_addr = 0xc51e
[   23.362399] In fpga mem driver!
[   23.365464] request_mem_region OK!
[   23.369100] fpga mem virtual address is 0xf3000000
[   24.166154]
[   24.166154] bcm54xx_config_init
[   25.246060]
[   25.246060] bcm54xx_config_init
[   29.246503] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   29.252518] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  462.487678] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       1039691776
main.c:14025: Detect 1GB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6fc8000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5dc1000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 8134d52e123b885c
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:9113: Chain[5] ASIC[3] has core num=2
main.c:9113: Chain[5] ASIC[59] has core num=15
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:9113: Chain[6] ASIC[15] has core num=15
main.c:9113: Chain[6] ASIC[35] has core num=5
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:9113: Chain[7] ASIC[17] has core num=2
main.c:9113: Chain[7] ASIC[19] has core num=1
main.c:9113: Chain[7] ASIC[54] has core num=1
main.c:9113: Chain[7] ASIC[55] has core num=2
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=23 on chain[5], value=930
main.c:9183: get PIC voltage=23 on chain[6], value=930
main.c:9183: get PIC voltage=6 on chain[7], value=940
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,39,28
main.c:9366: chain[5] temp chip I2C addr=0x9c
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,39,28
main.c:9366: chain[6] temp chip I2C addr=0x9c
main.c:9372: chain[6] has no middle temp, use special fix mode.
main.c:9349: chain[7] temp offset record: 62,0,0,0,0,0,39,28
main.c:9366: chain[7] temp chip I2C addr=0x9c
main.c:9372: chain[7] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 3
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649:
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 3, total chain num = 3
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 1844 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12285:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12328:bitmain_c5_init: Detect 1GB control board of XILINX
driver-btm-c5.c:12355:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12366:bitmain_c5_init: Miner compile time: Tue Jul 30 20:37:39 CST 2019 type: Antminer S9
driver-btm-c5.c:12456:bitmain_c5_init: miner ID : 8134d52e123b885c
driver-btm-c5.c:12613:bitmain_c5_init: Checking fans...
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:3007:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:3007:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:3007:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:3007:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:3007:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:3007:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2990:check_fan_beforeInit: get fan[5] speed=6000
driver-btm-c5.c:2994:check_fan_beforeInit: Fatal Error: some Fan lost or Fan speed low!