Search content
Sort by
Showing 20 of 37 results by Daminqn
Mine isn't stable above 575mhz. If I push it any higher at all I get constant USB disconnects and the hash rate plummets. Have you installed any extra cooling that is helping push the clocks higher?
No, has nothing changed.
My BJ is batch 2, PCB 1.1.
I said out there but I repeat, memory card in the Rpi was unstable, with a piece of cardboard stopped moving and no more problems, so far...
Someone might raise the clock speed to 640MHz over and get a stable result?
For now I'm with 640MHz, with less than 0.12% of rejections, I still use cgminer 3.9.0h2...
For now I'm with 640MHz, with less than 0.12% of rejections, I still use cgminer 3.9.0h2...
What hashrate do you get?
BTCGuild says 467.14
Minepeon 495
Did anyone find the self updating rPI image not work for them? I plugged in the HDMI cable and the image boots up archlinux but then shuts down on its own despite having the BJ plugged in. No mention of any flashing of the firmware at all.
Same thing happens to me...The rPi updater doesn't say much in terms of output. I just look at the lights. Plug in the rPi, wait about 20 seconds for it to boot, then plug in the BJ. The lights should start flashing for about 10 seconds. When they stop twinkling, it's finished.
so where can i go to CONFIRM that it actually completed sucessfully and that im running 0.4
Miner crash every hr or so? No then yes your good.
-------------- EDIT Its Ebay time for mine.
I had the same problem, apparently the memory card is somewhat loose in Rpi, then you place a piece of cardboard to fit better and it works, so far ...
After it is done, reboot computer back to windows and mine away. The firmware is really worth it. Prior to it I could not clock over 562mhz and only got 370GH/s. Now I am running it at 580mhz and it is getting 400GH/s at pool end. Tomorrow I will bump it up to 612mhz and see how it does. Before the firmware update I had about 10% error rate. I am barely seeing any errors now.
I have the 1.1 Rev PCB (batch 2) and whit cpu at 640MHz im getting 470-510GH/s, the pool inform 450GH/s without update the firmware.
Re: Where can i find a list of the pool URLs and Proxies for Multipool.us ?
hi, after doing some tests my BJ is going well
would like to make a couple of questions:
1 - with 600mhz cpu clock to get 450gh / s stable, with temperatures of 80 ° C, less than 1% error, someone has proven more stable mhz system?
2 - The fan noise is really high, probe disconnecting one and it turns out that actually make noise are the cooling radiator, the other 3 are silent, no way to lower the speed of the two fans or your I change default by less noisy? (my BJ's in my living room, it's really annoying)....
3 - 24h in btcguild, my gain was 0.05 BTC, is right? is little? Recommend me some other pool? (According to a calculator difficulty should win daily 0.07)
thanks for reading until here
would like to make a couple of questions:
1 - with 600mhz cpu clock to get 450gh / s stable, with temperatures of 80 ° C, less than 1% error, someone has proven more stable mhz system?
2 - The fan noise is really high, probe disconnecting one and it turns out that actually make noise are the cooling radiator, the other 3 are silent, no way to lower the speed of the two fans or your I change default by less noisy? (my BJ's in my living room, it's really annoying)....
3 - 24h in btcguild, my gain was 0.05 BTC, is right? is little? Recommend me some other pool? (According to a calculator difficulty should win daily 0.07)
thanks for reading until here
A Venezuela no se puede mandar?
Enviame un MP.
//Vives en Argentina? Sino dificil que te lo haga llegar...
Bueno, el aparatejo ya esta funcionando, parece mas dificil de lo que es, he elegido BTCguild, viene configurado para conectarse a Eligius, pero como no encontre la manera de que me deposite directamente en mi monedero en su pagina y el monedero que trae de serie, obviamente, no me genera confianza.
Lo raro es que no me deje agregar una direccion nueva, en la interfaz web solo muestra el que trae, sin opcion de cambiarlo
Segui estos pasos:
Setup Guide:
1. Plugin the Ethernet and power into the raspberry pi. Connect the provided USB cord from the pi to the back of the baby jet.
2. Turn on the power on the back of the baby jet.
3. Log into your router to find the IP (I think it uses DHCP, so yours will probably be different but in my case it was 192.168.0.12) it will be labeled as "MinePeon".
4. Point your browser to the pi's IP address
5. Log in using the username minepeon and password peon
5a. The password AND username are case sensitive.
6. Edit your pool information in the MinePeon software by clicking on the "Pools" tab, hit submit and you're good to go!
Un punto importante es que el minero no arranca, ni siquiera los ventiladores, hasta que esta conectado al USB del RPi, a no asustarse (como yo
).
Una vez conectado el usb, cgminer lo detecta automaticamente y comienza a minar.
Con respecto a la velocidad, el monitor dice 415.6Gh/s, pero la pagina de BTCGuild 381.7Gh/s, he leido que a la mayoria le da diferencia en menos...
PD: Con mas tiempo buscare la manera de hacer OC.
PD2: Los ventiladores son algo ruidosos, seguramente los voy a cambiar.
PD3: No pense que estaria tan bien construido, sinceramente mis felicitaciones a HF por la calidad del equipo.
Bueno, el aparatejo ya esta funcionando, parece mas dificil de lo que es, he elegido BTCguild, viene configurado para conectarse a Eligius, pero como no encontre la manera de que me deposite directamente en mi monedero en su pagina y el monedero que trae de serie, obviamente, no me genera confianza.
Lo raro es que no me deje agregar una direccion nueva, en la interfaz web solo muestra el que trae, sin opcion de cambiarlo
Segui estos pasos:
Setup Guide:
1. Plugin the Ethernet and power into the raspberry pi. Connect the provided USB cord from the pi to the back of the baby jet.
2. Turn on the power on the back of the baby jet.
3. Log into your router to find the IP (I think it uses DHCP, so yours will probably be different but in my case it was 192.168.0.12) it will be labeled as "MinePeon".
4. Point your browser to the pi's IP address
5. Log in using the username minepeon and password peon
5a. The password AND username are case sensitive.
6. Edit your pool information in the MinePeon software by clicking on the "Pools" tab, hit submit and you're good to go!
Un punto importante es que el minero no arranca, ni siquiera los ventiladores, hasta que esta conectado al USB del RPi, a no asustarse (como yo
).Una vez conectado el usb, cgminer lo detecta automaticamente y comienza a minar.
Con respecto a la velocidad, el monitor dice 415.6Gh/s, pero la pagina de BTCGuild 381.7Gh/s, he leido que a la mayoria le da diferencia en menos...
PD: Con mas tiempo buscare la manera de hacer OC.
PD2: Los ventiladores son algo ruidosos, seguramente los voy a cambiar.
PD3: No pense que estaria tan bien construido, sinceramente mis felicitaciones a HF por la calidad del equipo.
Gracias por el link bitbar y por tomarte el tiempo para contestar.
Pero como dije en el post, ya estoy leyendo el hilo en ingles y mi lengua nativa es el castellano, por eso abro este hilo aqui, en la seccion Español
Espero encontrar algunos hispanohablantes interesados en este cacharro.
La semana que viene subo algunas fotos, estoy configurandolo ahora mismo.
Pero como dije en el post, ya estoy leyendo el hilo en ingles y mi lengua nativa es el castellano, por eso abro este hilo aqui, en la seccion Español
Espero encontrar algunos hispanohablantes interesados en este cacharro.
La semana que viene subo algunas fotos, estoy configurandolo ahora mismo.
I was referring to the picture of the PCB, not the airflow test mock-up, BTW.
http://i.imgur.com/Uuyj92F.png
http://i.imgur.com/Uuyj92F.png
This is a picture.
https://images.weserv.nl/?url=imageshack.us/a/img94/1360/8lit.jpg&fnr
And this is a picture.
http://media.coindesk.com/2013/08/kncminer-asic-pcb.jpg
This is not a picture.
http://i.imgur.com/Uuyj92F.png
See the difference?
+1
I need to many fans in a liquid cooled system (CoolIT Cooling System)?
I pay for a system with liquid cooling ... no photo or CAD ¨picture¨?