New project for hashrate up on miners, absolute free, development of the project idea "ETHlargement" for new video card architectures ProjectETH+ release
Support Algo: Ethash/KawPow/ProgPow

Download: ProjectETH+

Virustotal: https://www.virustotal.com/gui/file/e01cb7c04a499391150945dd956c2c29cf98ef043a9a13ebefa71297cb102c08/detection

Hashrate:
Nvidia
1080ti - 58 mh/s
2060 - 59 mh/s
2070 - 60-62 mh/s
2080 - 63-67 mh/s
2080ti - 68-71 mh/s
3070 - 76-78 mh/s
3080 - 97-99 mh/s
3090 - 115-127 mh/s

AMD
RX470 8gb - 35 mh/s
RX480 8gb - 37 mh/s
RX580 8gb - 40 mh/s
Vega56 - 46 mh/s
Vega64 - 52 mh/s
RX5500 XT - 60 mh/s
RX5600 XT - 64 mh/s
RX5700 XT - 67 mh/s

P.S.: the project is being drowned by competitors, don't trust anyone, check the information yourself

If you have any gaming buddies i would ask if they would trade their radeon card for your nvidia.. thats what i did for my 6950s.

ive been running my Caymens in the low 80s for about a year now.. no issues yet.

looking forward to seeing these in use.

I try to keep them in the 70-80c range.

The GPU in question isnt spiking in heat, it dosnt get above 60c when at full load.

My other GPU is at a healthy 70-80c range ramping up RPMs on fans over that. I also used artic silver ceramic paste so there shouldnt be any shorting.

Is the power state affected by firmware at all? I was having a very strange issue with my laptop freezing when shutting down or coming out of sleep mode. But when i reflashed the same firmware it seemed to fix that. But then later after i took out the card to physically work it is when this madness started. Not that it means anything but ive worked with GPUs over my IT career and i was VERY careful with it, so im doubting i damaged it.. but it sure acts like i did.

one is getting about 150mhash and the other is getting about 50-60mhash.. same model cards, they should run the same mhash.

If i damaged the card while repasting the heatsink/memory would it act like this? Or not work at all?

okay so i restarted and the clocks returned to 700/1000 but still mining very slow. Is it normal for the pci-e speed to be so low?

Okay i took a screenshot of GPU-Z and GUIMiner up.. As you can see the clocks are very low on card 1 which reflect that when looking in GUIMiner.

If i had a new firmware revision id try that, but it dosnt seem there has been any since 2010!

http://i4.photobucket.com/albums/y143/Austinsevo/1-1.jpg

Since i repasted the cards they come up as "FirePros"... IDK why.

Okay so i found about 10 entries for "EnableULPS" and changed values to 0. Restarted but still still mining very low.

Just to confirm now my computer is up, i get about 150mhash right now (no OC) and a little over 200 when OCed.

GPU0: gets about 150mhash
GPU1: gets about 50mhash

thanks for the response! They should be a little under 200 mhash when tuned. One gets a little over 150 mhash and the "disabled" card gets about 60 mhash. I am running the 12.8 CCC driver.

Hmm nope i have not tried disabling ULPS, i googled it. Looks like it is a power saving reg key.

Hello,

I have an Alienware M17xr2 laptop running win7, it seems my 2nd card does not want to play with GUIMiner. The first card works great and gets a nice mhash, but my 2nd card is getting about half the speed and shows very low clocks. Along with it being disabled in The Catalyst Control Center.

If i go CF (which dosnt help mining) then the card shows up as "Linked" and with normal clocks. But still when i run GUIMiner the 2nd card only runs at half speed.

Any tips? Id love to flash my 5870m's BIOS but theres nothing new for years now. All i have are new drivers to work with.

ah okay i must be patient then....

nope still cannot post.. i have both 10 posts and 4 hours of total time logged in.

as another poster said, you should build a basic computer under $100.. not a multi 100 dollar computer to "to try to get rich"

oh okay thankyou, is it common practice not to answer mining questions in this newbie section?

Hello,

I have over 6 posts but i cannot post anywhere else besides this newbie section. When will this change?

Hello,

I have an Alienware M17xr2 laptop, it seems my 2nd card does not want to play with GUIMiner. The first card works great and gets a nice mhash, but my 2nd card is getting about half the speed and shows very low clocks. Along with it being disabled in The Catalyst Control Center.

If i go CF (which dosnt help mining) then the card shows up as "Linked" and with normal clocks. But still when i run GUIMiner the 2nd card only runs at half speed.

Any tips? Id love to flash my 5870m's BIOS but theres nothing new for years now. All i have are new drivers to work with.

I am with RandomQ, i dont hate on BFL.. but if something sounds too good to be true.. it usually is.

sorry to hijack, but is there a reward at half block? like when the full block is completed?

I feel that at this moment only one crypto-currency will arise.. but thats just speculation.