Search content
Sort by
Showing 17 of 17 results by Doeyourthing
Re: [GUIDE] GridSeed GC3355 5 Chip Setup/power/windows/linux/rpi by UnicornHasher
That means you GPU´s are not mining on bfgminer -> you can still run them with sgminer (x11, X13 etc..)
Thanks uBmQuote
One question:
I have 2 GPU HD6870 in my system. And when I run the bfgminer i got the message OCL 0 & OCL 1 disable. This message mean my GPU's are disable right? Or is this means something else?
I have 2 GPU HD6870 in my system. And when I run the bfgminer i got the message OCL 0 & OCL 1 disable. This message mean my GPU's are disable right? Or is this means something else?
Re: [Minera v0.3.4] Your next mining dashboard is here. CPUminer/CGminer/BFGminer.
After Minera is installed, and I change the IP address in the /etc/network/interfaces as normal to a static address, will Minera automatically adjust to the new address?
assuming you point your browser to the new ip.add.re.ss/minera then you'll be fine.. The system is not IP dependent
What kind of issues?
I started to look for a beaglebone to port Minera, unfortunately availability of rev c. (Europe) is limited and I can't find one at a decent price, but stay tuned for that.
I've inscreased my miners' Donation slider @ 43Mh/s to assist in covering you expenses for this. Hope others can follow suite.
My BBB is so much faster in everything it does that I don't understand, other than it costing approx. 50% more than the old RPi Model B, why others besides Mineforeman aren't' developing for this platform.
I guess this news is a start.
PS:
I'm still mining at only 7.5 G-blades instead of the full 8 G-blades miner capacity I own. I still can't understand why this is.
I believe that on my end I've eliminated any software & hardware discrepancies possibilities since I've replaced everything twice, except the miners & the Raspberry Pi platform.
On the software side I've been thru the gamut, Minera, Minepeon, Scripta, Starminer, what have you, & still the same thing.
It's random every time, the none-hashing on half a G-blade miner which changes to a diff. G-blade miner on every reboot or miner software restart process.
Oh, well, 7.5 G-blades at 43MH/s is better than anything less.
If I had a working Minera on the BBB platform this would probably be resolved. [wink, wink].
Hi Doeyourthing.
I don't currently have anything under the "Extra Options" portion since the "Enable device auto detection (--gc355-detect)" appears to be working well.
Do you suggest otherwise?
I used to have it setup manually with the following under "Extra Options" but I got the same results:
"--gc3355-detect --freq=838".
PS:
How can I setup each of the miners with their own Freq to see if maybe they respond better to different freq's individually using the "Extra Options" with CPUminer (minerd)?
Here are some screen caps of my setup from the Home screen to the relevant setup pages & then some:
http://i162.photobucket.com/albums/t264/suzukii69/Mining%20My%20Own%20Business/Mining%20with%20Minera%20v0_3_4/Homescreen-1.jpg
http://i162.photobucket.com/albums/t264/suzukii69/Mining%20My%20Own%20Business/Mining%20with%20Minera%20v0_3_4/Minerv034-SetupScreen-1.jpg
http://i162.photobucket.com/albums/t264/suzukii69/Mining%20My%20Own%20Business/Mining%20with%20Minera%20v0_3_4/Minerv034-SetupScreen-2-1.jpg
--gc3355=DEV0,DEV1,...,DEVn enable GC3355 chip mining mode (default: no)
--gc3355-detect automatically detect GC3355 miners (default: no)
--freq=FREQUENCY set GC3355 core frequency in NONE dual mode (default: 600)
--gc3355-freq=DEV0:F0,DEV1:F1,...,DEVn:Fn individual frequency setting
--gc3355-freq=DEV0:F0:CHIP0,...,DEVn:Fn:CHIPn individual per chip frequency setting
--gc3355-autotune auto overclocking each GC3355 chip (default: no)
--gc3355-timeout=N max. time in seconds after no share is submitted before restarting GC3355 (default: never)
There are multiple ways to set the frequency.
By device name:
Linux: --gc3355-freq=/dev/ttyACM0:850 Windows: --gc3355-freq=\\.\COM3:850
By serial string:
--gc3355-freq=8D751F965355:850
If you cannot find any /dev/ttyUSB or /dev/ttyACM, it related to running cgminer, this can easily be fixed by rebooting the system.
Re: [Minera v0.3.4] Your next mining dashboard is here. CPUminer/CGminer/BFGminer.
After Minera is installed, and I change the IP address in the /etc/network/interfaces as normal to a static address, will Minera automatically adjust to the new address?
assuming you point your browser to the new ip.add.re.ss/minera then you'll be fine.. The system is not IP dependent
What kind of issues?
I started to look for a beaglebone to port Minera, unfortunately availability of rev c. (Europe) is limited and I can't find one at a decent price, but stay tuned for that.
I've inscreased my miners' Donation slider @ 43Mh/s to assist in covering you expenses for this. Hope others can follow suite.
My BBB is so much faster in everything it does that I don't understand, other than it costing approx. 50% more than the old RPi Model B, why others besides Mineforeman aren't' developing for this platform.
I guess this news is a start.
PS:
I'm still mining at only 7.5 G-blades instead of the full 8 G-blades miner capacity I own. I still can't understand why this is.
I believe that on my end I've eliminated any software & hardware discrepancies possibilities since I've replaced everything twice, except the miners & the Raspberry Pi platform.
On the software side I've been thru the gamut, Minera, Minepeon, Scripta, Starminer, what have you, & still the same thing.
It's random every time, the none-hashing on half a G-blade miner which changes to a diff. G-blade miner on every reboot or miner software restart process.
Oh, well, 7.5 G-blades at 43MH/s is better than anything less.
If I had a working Minera on the BBB platform this would probably be resolved. [wink, wink].
Re: [GUIDE] GridSeed GC3355 5 Chip Setup/power/windows/linux/rpi by UnicornHasher
Download BFGminer 4.4.0. (https://bitcointalk.org/index.php?topic=626361.0) My batch file looks like this:
bfgminer.exe --scrypt -o POOL:PORT -u USERNAME -p PASSWORD -d gridseed -S gridseed:\\.\COM11 -S gridseed:\\.\COM13 -S gridseed:\\.\COM14 --set-device gridseed@\\.\COM14:clock=838 --set-device gridseed@\\.\COM13:clock=863 --set-device gridseed@\\.\COM11:clock=875
You can open the Device Manager and find the COM ports of your gridseeds. Use the drivers installed with Gridseed. DO NOT use Zadig. That is only for CGMiner. Just set the clock speeds and find out which have many hardware errors. If you run for 1/2 an hour and none have HW, bump the speeds up a little bit and try again until you start to get them. Then drop the frequency just a little. Frequencies that work are:
800, 813, 825, 838, 850, 863, 875, 888, 900
If you need help, I'm on twitter @bradleyploof
Thanks, is working great. bfgminer.exe --scrypt -o POOL:PORT -u USERNAME -p PASSWORD -d gridseed -S gridseed:\\.\COM11 -S gridseed:\\.\COM13 -S gridseed:\\.\COM14 --set-device gridseed@\\.\COM14:clock=838 --set-device gridseed@\\.\COM13:clock=863 --set-device gridseed@\\.\COM11:clock=875
You can open the Device Manager and find the COM ports of your gridseeds. Use the drivers installed with Gridseed. DO NOT use Zadig. That is only for CGMiner. Just set the clock speeds and find out which have many hardware errors. If you run for 1/2 an hour and none have HW, bump the speeds up a little bit and try again until you start to get them. Then drop the frequency just a little. Frequencies that work are:
800, 813, 825, 838, 850, 863, 875, 888, 900
If you need help, I'm on twitter @bradleyploof
One question:
I have 2 GPU HD6870 in my system. And when I run the bfgminer i got the message OCL 0 & OCL 1 disable. This message mean my GPU's are disable right? Or is this means something else?
Re: [ANN][MULTI][VARDIFF] Pool|TradeMyBit - 0.5% Prop/Profit Swap/Auto-Exch
Hi Hi support,
Can you look for me what is the problem with paying out. Two days and I don't receive nothing???
Is not much but everything is welcome
On 28 july was my ratio BTC 0.02214, but then it was gone and I did not receive any payment??
BTC adres: 1FZesbXstMkoCCDuHFKu7uDd9CYceQgUtC
Can you look for me what is the problem with paying out. Two days and I don't receive nothing???
Is not much but everything is welcome
On 28 july was my ratio BTC 0.02214, but then it was gone and I did not receive any payment??
BTC adres: 1FZesbXstMkoCCDuHFKu7uDd9CYceQgUtC
Re: [Minera v0.3.2] Your next mining dashboard is here. CPUminer/CGminer/BFGminer.
@ michelem: many many thanks for your time and effort for this Mining web interface.
Keep up the good work.
Can someone help me out, with a good config for G -Blade 80 chip module.
Thanks
Keep up the good work.
Can someone help me out, with a good config for G -Blade 80 chip module.
Thanks
Re: [ANN][VRC] | VeriCoin | PoS - Dynamic Interest | No Premine
Can someone help me out why on the --> http://pool.vericoin.info/workers I have 2 shares and at my mining cmd screen i have above 10.000 shares? Or that's not the way too see that??
I was wondering the same thing, no payouts for 2 days now..
Re: [ANN][VRC] | VeriCoin | PoS - Dynamic Interest | No Premine
Can someone help me out why on the --> http://pool.vericoin.info/workers I have 2 shares and at my mining cmd screen i have above 10.000 shares? Or that's not the way too see that??
Re: [ANN][VRC] | VeriCoin | PoS - Dynamic Interest | No Premine
I'm mining at the veripool with ~15 MH X11 since 24 hours and i didnt receive one single payout.
Pool website says sub-daily payouts.
Whats wrong?
Address: VQJqrbmojVXqQRag46GujwjoHqMvgBQHNz
Pool website says sub-daily payouts.
Whats wrong?
Address: VQJqrbmojVXqQRag46GujwjoHqMvgBQHNz
They are stealing, I'm mining too with 10-12 MHash and pay out is terrible. You are mining for nothing this shit.
Thanks veripool. Another MT-GoX affect.
Nobody is stealing anything. Our pool wallet address is VV9BKFQsfFiM8hEQKMNuiPaPs5GJNWGZcm. Feel free to inspect it. Every address sent to is or was mining before.
Re: [ANN][VRC] | VeriCoin | PoS - Dynamic Interest | No Premine
I'm mining at the veripool with ~15 MH X11 since 24 hours and i didnt receive one single payout.
Pool website says sub-daily payouts.
Whats wrong?
Address: VQJqrbmojVXqQRag46GujwjoHqMvgBQHNz
Pool website says sub-daily payouts.
Whats wrong?
Address: VQJqrbmojVXqQRag46GujwjoHqMvgBQHNz
They are stealing, I'm mining too with 10-12 MHash and pay out is terrible. You are mining for nothing this shit.
Thanks veripool. Another MT-GoX affect.
I don't know enough about this to comment. Can anyone verify what this guy is talking about? Or Fuuuuudddd?
Re: [ANN][VRC] | VeriCoin | PoS - Dynamic Interest | No Premine
I'm mining at the veripool with ~15 MH X11 since 24 hours and i didnt receive one single payout.
Pool website says sub-daily payouts.
Whats wrong?
Address: VQJqrbmojVXqQRag46GujwjoHqMvgBQHNz
Pool website says sub-daily payouts.
Whats wrong?
Address: VQJqrbmojVXqQRag46GujwjoHqMvgBQHNz
They are stealing, I'm mining too with 10-12 MHash and pay out is terrible. You are mining for nothing this shit.
Thanks veripool. Another MT-GoX affect.
Re: [ANN][VRC] | VeriCoin | PoS - Dynamic Interest | No Premine
Quote
Sorry for not checking ;-)
Has anyone been mining on
http://pool.vericoin.info/ with X11
What is your hashrate and average payout ?
My hashrate is around 18.06 MH and I have one share in the last hour.
Has anyone been mining on
http://pool.vericoin.info/ with X11
What is your hashrate and average payout ?
My hashrate is around 18.06 MH and I have one share in the last hour.
Yes I'm mining there to. Because there are no other pools. but you cannot see nothing. They can affect the entire share because you can not see what you're mining
Re: [ANN][VRC] | VeriCoin | PoS - Dynamic Interest | No Premine
Why only one pool for mining? Yesterday i recieve 10 coine in 6 hours. and now for more then 6 no Coin.
But on the exchange site people are selling like crazy, where are the pools then?
But on the exchange site people are selling like crazy, where are the pools then?
Re: [ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer)
Can someone help me out how to put the batch file look ad a config?
I'm using SGMiner I have this e.g.:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
timeout /t 4
sgminer.exe -c myconfig.conf
But now i'm going to use sph-sgminer_x11mod_b2
Thanks
I'm using SGMiner I have this e.g.:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
timeout /t 4
sgminer.exe -c myconfig.conf
But now i'm going to use sph-sgminer_x11mod_b2
Thanks