Search content
Sort by
Showing 5 of 5 results by Erium
What are you mining? For ETH, you can go up to ~30 MHs if your cards are 8gb
For BTC / BCH , i have no clue
Can you specify which card is working on 5 MHs ? Maybe there's some problem with setup; wires, jacks, power etc.? Try changing that cards stuff with another one and lets see if it is about setup
For BTC / BCH , i have no clue
Can you specify which card is working on 5 MHs ? Maybe there's some problem with setup; wires, jacks, power etc.? Try changing that cards stuff with another one and lets see if it is about setup
Hello Berque. I'm mining with Nanopool. Any advise to obtain better results? Also how can you rwach 30 Mh/s with this GPU?
Thank you.
Now the new issue is that rigs turn off after one hour mining with NanoPool.
Any advise for this power issue?
Also after update from Dirver 22.19.162.4 to 22.19.662.4 Claymore'w ETH no longer shows Temp and Fan data.
Thanks again all.
Any advise for this power issue?
Also after update from Dirver 22.19.162.4 to 22.19.662.4 Claymore'w ETH no longer shows Temp and Fan data.
Thanks again all.
Thank you all for your help. I just change the monitor to a GPU at a PCIe 2.0 x16 instead of PCI Express x1 and the five GPU are working at 22 Mh/s (110 Mh/s Total).
Any advice for a better performance? I don't want to overclock GPU. But maybe with other driver.
Now both rigs are using Driver 22.19.162.4. I prefer no to upgrade is performance will be the same.
Also I have other rig with 6 GTX1070 and is working at 27 Mh/s each (162 Mh/s Total). I don't know if this ones are better, or if it the CUDA that makes them work at 27 vs 22 Radeon.
Thanks again.
Any advice for a better performance? I don't want to overclock GPU. But maybe with other driver.
Now both rigs are using Driver 22.19.162.4. I prefer no to upgrade is performance will be the same.
Also I have other rig with 6 GTX1070 and is working at 27 Mh/s each (162 Mh/s Total). I don't know if this ones are better, or if it the CUDA that makes them work at 27 vs 22 Radeon.
Thanks again.
Hello all. Today I built two rigs for mining ETH with Nanopool:
Gigabyte GA-Z170X Motherboard
Windows 10
Five Sapphire Nitro+ RX580.
Both have same issue:
GPU0 5Mh/s
GPU1 22 Mh/s
GPU2 22 Mh/s
GPU3 22 Mh/s
GPU4 22 Mh/s
How can I put GPU0 at 22 Mh/s like others?
Is it possible to increase from 22 Mh/s to a better Mh/s?
Any other pool better that Nanopool?
Thank you all.
Gigabyte GA-Z170X Motherboard
Windows 10
Five Sapphire Nitro+ RX580.
Both have same issue:
GPU0 5Mh/s
GPU1 22 Mh/s
GPU2 22 Mh/s
GPU3 22 Mh/s
GPU4 22 Mh/s
How can I put GPU0 at 22 Mh/s like others?
Is it possible to increase from 22 Mh/s to a better Mh/s?
Any other pool better that Nanopool?
Thank you all.
Hello all. Today I built two rigs:
Gigabyte GA-Z170X Motherboard
Windows 10
Five Sapphire Nitro+ RX580.
Both have same issue:
GPU0 5Mh/s
GPU1 22 Mh/s
GPU2 22 Mh/s
GPU3 22 Mh/s
GPU4 22 Mh/s
How can I put GPU0 at 22 Mh/s like others?
Is it possible to increase from 22 Mh/s to a better Mh/s?
Thank you all.
Gigabyte GA-Z170X Motherboard
Windows 10
Five Sapphire Nitro+ RX580.
Both have same issue:
GPU0 5Mh/s
GPU1 22 Mh/s
GPU2 22 Mh/s
GPU3 22 Mh/s
GPU4 22 Mh/s
How can I put GPU0 at 22 Mh/s like others?
Is it possible to increase from 22 Mh/s to a better Mh/s?
Thank you all.