GPU0's fan isn't moving, have you considered a hardware issue? Check the rig.
Even if it's not hashing, it should spin at minimum speed except if the model is designed to spin at certain temp.
(
it's at the same temp rage as the others)
no, this problem on all RIG's where 1-st card 584(4Gb)
the following helped. set the screen resolution to 800x600, monitor emulator is connected.
or
need to do GPU0 - RX588 (8Gb) instead 4Gb
I have the same problem too. i will try to switch to linux.
You can try and set your -eres 1 and see if it makes a difference but the issue is that the GPU0 (basically the GPU in the main x16 pci 3.0 slot) loads more of the windows resources into the GDDR. Hence its on the brink of completely maxing out its capacity. Hence why your other GPUs are working.
If you have any GPUs that are >4GB then put those in the main GPU0 slot and each of your GPUs which are 4GB should still mine temporarily. However your time is limited, you can try Windows 7 or Linux and buy you more time.
However eventually you just gotta upgrade to the 8GB models to get around this.
