Search content
Sort by
Showing 20 of 26 results by Gigasnike95
you won't get warning for mem. errors from the miner 
Test the card by letting it work for 24h. If it survives 24h its good and stable
Hmmm, well the errors im referring to are the ones reported by HWINFO, after dialing it back to 2025 mem freq then they no longer occur at the cost of Hashrate of cause , so you are saying these errors don't matter?Test the card by letting it work for 24h. If it survives 24h its good and stable
well it looks like they don't really affect found shares, or not in a way i'm aware of.
Interesting, well for now I think i'm gonna stick to a freq without errors which the highest I can get is 2075 which gives me 29.6MH when I use a core voltage offset of -96. Thanks again for the help
Omg, did you get to that with sapphire Rx 570 4gb??? How did you get it???
If you use the same GPU, could you pass me the BIOS? Or tell me how to edit original BIOS please
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
UPDATE v1094:
update/replaced claymore-eth-v9.2 by claymore-eth-v9.3
(reload/reboot to start using it if you are using 9.2 now)
Z170 / Z270 - 4G or other boot problems on your motherboard / Possible solution
I prepared few different verions of kernels with different boot settings.
If you had problem with current SMOS version, please check those below.
Download each image FROM the TOP and reflash it and tell me:
1. What problem you had
2. Which images didnt fixed this problem
3. Which images Fixed your problem
note. If you will have error AFTER 14'000'000 secotr in flashing, then ignore it and consider it flashed succesfully !
Please download and flash those images. Take first, flash, boot, if wont help take one below... etc ...
Please write what was your problem and REPLY which didnt fixed your problem and which DID.
0ANDips0.imgc
https://beta.simplemining.net/download/simpleminer-RX-v1093-4.10.12-16.60-i915fw.imgc
update/replaced claymore-eth-v9.2 by claymore-eth-v9.3
(reload/reboot to start using it if you are using 9.2 now)
Z170 / Z270 - 4G or other boot problems on your motherboard / Possible solution
I prepared few different verions of kernels with different boot settings.
If you had problem with current SMOS version, please check those below.
Download each image FROM the TOP and reflash it and tell me:
1. What problem you had
2. Which images didnt fixed this problem
3. Which images Fixed your problem
note. If you will have error AFTER 14'000'000 secotr in flashing, then ignore it and consider it flashed succesfully !
Please download and flash those images. Take first, flash, boot, if wont help take one below... etc ...
Please write what was your problem and REPLY which didnt fixed your problem and which DID.
0ANDips0.imgc
https://beta.simplemining.net/download/simpleminer-RX-v1093-4.10.12-16.60-i915fw.imgc
Do you think this versions you've just updated could make a 7x 570 mining rig work?
If the answer is yes, then I will try it tomorrow and give you feedback
Yes. My team is working with You!
We will give a try this evening, so be atempt to read this post later, maybe we have fixed the problem
Let me know. I also solve the problem. My solution is 5x 570 + 2x 1060 gtx for now.
5x29MHs + 2x 23.5 MHs per rig, works fine.How did you get it? When we install 5x 570 it works fine, but if we reboot, sometimes it works, sometimes windows reports error 43, it isn't stable.
In ethOS or simpleminingOS, we need to activate 4g decoding to use more than 4 GPUs but it fails and it doesn't boot
Yes after the first or second restart again 43. I will restore the patch and immediately new patch application. Then everything works fine. Now I've done 3 restarts behind and it's still working.
I tried and you were right
The same issue on Gygabyte Z170 Gaming K3 and 6 cards Aorus RX570 4gb.
Windows 10 is working good with only 5 and with 6th is reseting.
All checked
- other risers - not work
- other power suply - not work
- other (same) mMotherboard - not work
- other 6 cards - not work.
Did any of You overcome the problem?
Windows 10 is working good with only 5 and with 6th is reseting.
All checked
- other risers - not work
- other power suply - not work
- other (same) mMotherboard - not work
- other 6 cards - not work.
Did any of You overcome the problem?
i think you must check your pcie setting, set the pcie to x1 x2 x3 or auto (find the best) then you can disable wlan too at bios, disable onboard vga
the only thing we can do is to disable wlan, we cant do the other settings in this mboard
Yes. My team is working with You!
We will give a try this evening, so be atempt to read this post later, maybe we have fixed the problem
Let me know. I also solve the problem. My solution is 5x 570 + 2x 1060 gtx for now.
5x29MHs + 2x 23.5 MHs per rig, works fine.How did you get it? When we install 5x 570 it works fine, but if we reboot, sometimes it works, sometimes windows reports error 43, it isn't stable.
In ethOS or simpleminingOS, we need to activate 4g decoding to use more than 4 GPUs but it fails and it doesn't boot
Yes. My team is working with You!
We will give a try this evening, so be atempt to read this post later, maybe we have fixed the problem
The same issue on Gygabyte Z170 Gaming K3 and 6 cards Aorus RX570 4gb.
Windows 10 is working good with only 5 and with 6th is reseting.
All checked
- other risers - not work
- other power suply - not work
- other (same) mMotherboard - not work
- other 6 cards - not work.
Did any of You overcome the problem?
Windows 10 is working good with only 5 and with 6th is reseting.
All checked
- other risers - not work
- other power suply - not work
- other (same) mMotherboard - not work
- other 6 cards - not work.
Did any of You overcome the problem?
I think that at this moment nobody did it, but pay attention to this threat, we all can fin together the solution
Good thing you opened a thread about this problem so we can solve it.
Already had 2 frames ready for 12x570, i now made one more so i can run 4 cards per frame heh.
I will try to help in resolving this issue, we realy don't want 4gpu rigs when we can have 6 or more
Did you try flashing them to 470 bioses?
Already had 2 frames ready for 12x570, i now made one more so i can run 4 cards per frame heh.
I will try to help in resolving this issue, we realy don't want 4gpu rigs when we can have 6 or more
Did you try flashing them to 470 bioses?
No, i'm trying it this evening and i'll write how does it work, but guys, you better think un other way to solve the issue becouse maybe it doesnt work, whatever you think that mayor work, tell me
In this thread i want to explain how i build a 7x RX 570 mining rig step by step, but as you may know, there's an issue with the driver, and in the moment i plug a 5th GPU, windows doesnt work in the way it should, the same in simpleminingOS and ethOS. I must say that 4 GPU are working good, here you have some pics of my rig and a list:
.PSU: EVGA G2 1600W
.VGA: SASPHIRE RX 570 PULSE 4GB
.VGA DRIVER: 17.4.3
.MOBO: MSI Z170A PRO CARBON
.MOBO BIOS VERSION: 1.81 Creepas MOD
.CPU: INTEL PENTIUM G4400 SKYLAKE
.HDD: SAMSUNG 120 GB SSD
.RAM: 4GB CORSAIR
. Driver 17.4.3 not working
. Driver 17.4.4(Beta) not working
. Ethos with more than 4 GPUs not working
.Simple mining os with more than 4 GPUs not working
My bios settings:
.4G decoding on
. PEG0 and PEG1 GEN 1 and GEN2 not working
http://i.imgur.com/wyaI64S.jpg
http://i.imgur.com/MnyESte.jpg
http://i.imgur.com/A2alS0U.jpg
http://i.imgur.com/vdhGmwB.jpg
I just want you guys to help me to fix the issue with 570/580 and i will write a guide step by step, tomorrow i will try to flash a modified BIOS that will try windows to recognize 570 as a 470, then i will be able to use 7 570 with the 470 driver
thanks @creepas for your support, this is his post:
https://bitcointalk.org/index.php?topic=1819611.msg18124988#msg18124988
UPDATE 1:
We will give a try this evening, so be atempt to read this post later, maybe we have fixed the problem
Let me know. I also solve the problem. My solution is 5x 570 + 2x 1060 gtx for now. 5x29MHs + 2x 23.5 MHs per rig, works fine.
How did you get it? When we install 5x 570 it works fine, but if we reboot, sometimes it works, sometimes windows reports error 43, it isn't stable.
In ethOS or simpleminingOS, we need to activate 4g decoding to use more than 4 GPUs but it fails and it doesn't boot
Yes after the first or second restart again 43. I will restore the patch and immediately new patch application. Then everything works fine. Now I've done 3 restarts behind and it's still working.
this works guys! we have 5 working GPUs
.PSU: EVGA G2 1600W
.VGA: SASPHIRE RX 570 PULSE 4GB
.VGA DRIVER: 17.4.3
.MOBO: MSI Z170A PRO CARBON
.MOBO BIOS VERSION: 1.81 Creepas MOD
.CPU: INTEL PENTIUM G4400 SKYLAKE
.HDD: SAMSUNG 120 GB SSD
.RAM: 4GB CORSAIR
. Driver 17.4.3 not working
. Driver 17.4.4(Beta) not working
. Ethos with more than 4 GPUs not working
.Simple mining os with more than 4 GPUs not working
My bios settings:
.4G decoding on
. PEG0 and PEG1 GEN 1 and GEN2 not working
http://i.imgur.com/wyaI64S.jpg
http://i.imgur.com/MnyESte.jpg
http://i.imgur.com/A2alS0U.jpg
http://i.imgur.com/vdhGmwB.jpg
I just want you guys to help me to fix the issue with 570/580 and i will write a guide step by step, tomorrow i will try to flash a modified BIOS that will try windows to recognize 570 as a 470, then i will be able to use 7 570 with the 470 driver
thanks @creepas for your support, this is his post:
https://bitcointalk.org/index.php?topic=1819611.msg18124988#msg18124988
UPDATE 1:
Yes. My team is working with You!
We will give a try this evening, so be atempt to read this post later, maybe we have fixed the problem
Let me know. I also solve the problem. My solution is 5x 570 + 2x 1060 gtx for now.
5x29MHs + 2x 23.5 MHs per rig, works fine.How did you get it? When we install 5x 570 it works fine, but if we reboot, sometimes it works, sometimes windows reports error 43, it isn't stable.
In ethOS or simpleminingOS, we need to activate 4g decoding to use more than 4 GPUs but it fails and it doesn't boot
Yes after the first or second restart again 43. I will restore the patch and immediately new patch application. Then everything works fine. Now I've done 3 restarts behind and it's still working.
this works guys! we have 5 working GPUs
