Search content
Sort by
Showing 20 of 55 results by GoldZuGeld
Re: Sammelbestellung für Ztex FPGA's: Come in and get one more :-)
ich denke das hier jeder einmal dieses Blogeintrag gelesen haben sollte 
http://blog.bitcoin.de/neues-bitcoin-zeitalter-steht-bevor-mining-effizienz-mit-neuer-hardware-wird-um-ein-vielfaches-ansteigen
http://blog.bitcoin.de/neues-bitcoin-zeitalter-steht-bevor-mining-effizienz-mit-neuer-hardware-wird-um-ein-vielfaches-ansteigen
otrw2 should work just fine.
I haven't done it, so I can't give instructions. Let me know how it goes.
I haven't done it, so I can't give instructions. Let me know how it goes.
yeah otrw2 works. I've used this instructions http://www.dd-wrt.com/phpBB2/viewtopic.php?t=156013
it takes time to go up to full speed 
I have the same problem with the Rpi.
How stable is the setup?
I have the same problem with the Rpi.
How stable is the setup?
it runs the whole day today, without problems
but as i said hash rate a bit lower than on my desktop pc.I have to build a case for the configuration, then it could run 24/7. Until that it only runs ~12 hours a day.
I'm using a noname usb stick with 1GB storage. are there many reading operations to the stick?
Or maybe the usb hub sucks, because it's a cheap hub.
seems to work nicely.
E3200 + Usb Hub + Ztex Quad + Coolermaster GX 450
runs perfect
but hash rate is a bit lower than on my pc. only ~ 740mh/s instead of nearly 900.
Any Ideas?
E3200 + Usb Hub + Ztex Quad + Coolermaster GX 450
runs perfect
but hash rate is a bit lower than on my pc. only ~ 740mh/s instead of nearly 900.
Any Ideas?
Re: [2300 GH] BTC Guild - Pure PPS Merged Mining, Port 80 Mining, No Invalid Blocks
I can't geht cgminer work with btcguild.
I use as url http://de.btcguild.com:8332/
username: myusername_workername
password:
password nothing just pressed enter.
what is the problem? i tried several combinations.
I use as url http://de.btcguild.com:8332/
username: myusername_workername
password:
password nothing just pressed enter.
what is the problem? i tried several combinations.
whoops. Linux newbie fail 
seems that i've renamed the bitstream file to bitstreams instead to copy it into a bitstreams folder.
I think this is a mistake or something is missing in your readme:
Copy the bitstreams to /opt/bin/bitstreams
you have to create the bitstreams folder first an then there is a / after bitstreams missing, i think.
EDIT: OMG! It works! Thank you so much! In the next few days, I try to add some information for ztex boards for your readme.
seems that i've renamed the bitstream file to bitstreams instead to copy it into a bitstreams folder.
I think this is a mistake or something is missing in your readme:
Copy the bitstreams to /opt/bin/bitstreams
you have to create the bitstreams folder first an then there is a / after bitstreams missing, i think.
EDIT: OMG! It works! Thank you so much! In the next few days, I try to add some information for ztex boards for your readme.
Quote
/dev/usb/tts/: No such file or directory
[2012-08-24 23:07:16] ZTEX 04A36DEC05-1: failed to read firmware 'ztex_ufm1_15y1.bit'
[2012-08-24 23:07:16] ZTEX 04A36DEC05-1: failed to read firmware 'ztex_ufm1_15y1.bit'
[2012-08-24 23:07:16] ZTEX 04A36DEC05-1: failed to read firmware 'ztex_ufm1_15y1.bit'
[2012-08-24 23:07:16] ZTEX 04A36DEC05-1: failed to read firmware 'ztex_ufm1_15y1.bit'
thats what screen -r says
latest log
Quote
root@Linksys E3200:/opt/var/log# tail -f /opt/var/log/20120825-002047.3158.log
[2012-08-25 00:20:48] Loaded configuration file /opt/etc/cgminer.conf
[2012-08-25 00:20:48] Found 1 ztex board
[2012-08-25 00:20:48] ZTEX 04A36DEC05-4: Found Ztex (fpga count = 4) , mark as 3
[2012-08-25 00:20:48] Probing for an alive pool
[2012-08-25 00:20:48] Pool 0 slow/down or URL or credentials invalid
[2012-08-25 00:20:48] Unable to get work from pool 0 http://de.btcguild.com:8332
[2012-08-25 00:20:48] ZTEX 04A36DEC05-1: failed to read firmware 'ztex_ufm1_15y1.bit'
[2012-08-25 00:20:48] ZTEX 04A36DEC05-1: failed to read firmware 'ztex_ufm1_15y1.bit'
[2012-08-25 00:20:48] Long-polling activated for http://pit.deepbit.net:8332/listenChannel
[2012-08-25 00:22:48] LONGPOLL from pool 1 detected new block
[2012-08-25 00:20:48] Loaded configuration file /opt/etc/cgminer.conf
[2012-08-25 00:20:48] Found 1 ztex board
[2012-08-25 00:20:48] ZTEX 04A36DEC05-4: Found Ztex (fpga count = 4) , mark as 3
[2012-08-25 00:20:48] Probing for an alive pool
[2012-08-25 00:20:48] Pool 0 slow/down or URL or credentials invalid
[2012-08-25 00:20:48] Unable to get work from pool 0 http://de.btcguild.com:8332
[2012-08-25 00:20:48] ZTEX 04A36DEC05-1: failed to read firmware 'ztex_ufm1_15y1.bit'
[2012-08-25 00:20:48] ZTEX 04A36DEC05-1: failed to read firmware 'ztex_ufm1_15y1.bit'
[2012-08-25 00:20:48] Long-polling activated for http://pit.deepbit.net:8332/listenChannel
[2012-08-25 00:22:48] LONGPOLL from pool 1 detected new block
ok something wrong in my credentials for the first pool. but second pool does'nt work, too.
ok, not bad, i thnk...
but still doest't work. Must see the full log.
Quote
[2012-08-24 13:07:36] LONGPOLL from pool 1 detected new block
[2012-08-24 13:20:12] LONGPOLL from pool 1 detected new block
[2012-08-24 13:25:12] LONGPOLL from pool 1 detected new block
[2012-08-24 13:30:44] LONGPOLL from pool 1 detected new block
[2012-08-24 13:30:47] LONGPOLL from pool 1 requested work restart
[2012-08-24 13:31:03] LONGPOLL from pool 1 detected new block
[2012-08-24 13:31:04] LONGPOLL from pool 1 requested work restart
[2012-08-24 13:35:09] LONGPOLL from pool 1 detected new block
[2012-08-24 13:35:11] LONGPOLL from pool 1 requested work restart
[2012-08-24 13:35:13] LONGPOLL from pool 1 requested work restart
[2012-08-24 13:45:30] LONGPOLL from pool 1 detected new block
[2012-08-24 13:20:12] LONGPOLL from pool 1 detected new block
[2012-08-24 13:25:12] LONGPOLL from pool 1 detected new block
[2012-08-24 13:30:44] LONGPOLL from pool 1 detected new block
[2012-08-24 13:30:47] LONGPOLL from pool 1 requested work restart
[2012-08-24 13:31:03] LONGPOLL from pool 1 detected new block
[2012-08-24 13:31:04] LONGPOLL from pool 1 requested work restart
[2012-08-24 13:35:09] LONGPOLL from pool 1 detected new block
[2012-08-24 13:35:11] LONGPOLL from pool 1 requested work restart
[2012-08-24 13:35:13] LONGPOLL from pool 1 requested work restart
[2012-08-24 13:45:30] LONGPOLL from pool 1 detected new block
but still doest't work. Must see the full log.
221a:0100 is the ztex device, so cgminer/libusb is not detecting it.
What log output does cgminer give?
should get something like this:
[2012-07-02 23:39:57] Not a ZTEX device 8564:1000
[2012-07-02 23:39:57] Not a ZTEX device 0409:005a
[2012-07-02 23:39:57] Not a ZTEX device 0409:005a
[2012-07-02 23:39:57] Not a ZTEX device 0000:0000
[2012-07-02 23:39:57] Not a ZTEX device 0000:0000
but if you get
[2012-07-02 23:39:57] Not a ZTEX device 221a:0100
then something weird is going on.
What log output does cgminer give?
should get something like this:
[2012-07-02 23:39:57] Not a ZTEX device 8564:1000
[2012-07-02 23:39:57] Not a ZTEX device 0409:005a
[2012-07-02 23:39:57] Not a ZTEX device 0409:005a
[2012-07-02 23:39:57] Not a ZTEX device 0000:0000
[2012-07-02 23:39:57] Not a ZTEX device 0000:0000
but if you get
[2012-07-02 23:39:57] Not a ZTEX device 221a:0100
then something weird is going on.
maybe it's a bit late for me but i have only do this:
tail -f /opt/var/log/YYYYMMDD-HHMMSS..log
replacing YYYYMMDD-HHMMSS and whats with the PID?
ok thanks for this explanation.
now i have another problem:
serialmodules is started but there is no folder tts in /dev/usb
there are 2 usb sticks connected over a hub
now i have another problem:
serialmodules is started but there is no folder tts in /dev/usb
there are 2 usb sticks connected over a hub
Need to install optware (OTRW)
Links to do that are in the readme.
Links to do that are in the readme.
uhh, did not finish the whole instruction.
http://wd.mirmana.com/prep_optware seems to be down
Is otrw2 an alternative?
otrw2 should work just fine.
I haven't done it, so I can't give instructions. Let me know how it goes.
i'll try.
what do you mean with
Quote
For ztex, copy libusb to /opt/lib rename the original
what is the original file? there is only libusb-0.1.so.4 , libusb.so and libusb-0.1.so.4.4.4