I tried to use the -clKernel 3  option (Phoenix 5.7b) for various drivers from 18.6.1 to 21 .... but on each of these drivers -clKernel 3 is ignored for all GPU (RX580 Nitro+  8GB Micron and Hynix cards)

I tried new PhoenixMiner 5.6a with the same settings from working 5.5c and I got this error:

https://ibb.co/jLcPZHw

"Video driver consistency error. Please go back to version 5.5c"

Driver version is 20.11.1

Does anyone have this issue?

What are the overclock setting you guys are using for RX470/480/570/580 for KAWPOW?

RX580 4GB (Kawpow Hashrate) with TRM - https://www.youtube.com/watch?v=Otl0MwZcbuU

  -d, --devices=DEVLIST     Sets gpu devices to use from detected list. DEVLIST should be a comma-
                              separated list of device indices, e.g. -d 0,1,2,4.  If not specified, all
                              devices on the platform(s) will be used.  NOTE: by default the devices are ordered
                              by pcie bus ordering. Use --list_devices to show indices.
try like this, all commands in file USAGE.txt
1. TRM ... --device=0,1,2,3
2. TRM ... --device=4,5

Not quite correct

for ETC you need 2.6GB VRAM currently

for ETH you need 4.1GB VRAM currently

I found two my old GPU's (AMD Radeon 4850 0.5GB and 6870 1GB), what kind of hashrate I would expect from these cards? And if I connect 2 GPU's to mobo, do I need the SLI bridge adapter for mining?

(riskware bitcoinminer)

Right now I am mining with 3 GPUs, how do I set the config file if I only want to mine with GPU no. 2 & 3. How do write the parameter in Phoenix miner? -gpus 2,3?

I am trying to restart the miner every 6 hours.
I used -timeout 10 (10 mins)
It shutdown the miner but does not restart it.
Other parameters are default.

Am I doing something wrong?

is there any command line that can restart phoenix miner after 24 hours ? I used to do that in claymore but I cannot find the line in the readme file of phoenix . thanks

please miner freinds help to set up my rig. im new in phoenix miner. my cards running slow especially rx570 giving 26mhs. it was giving 30mhs on claymore. here is bat file, what can i add and remove.
Thank you everybody.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
PhoenixMiner.exe -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal 3KPDtEhehBkrgKbXhTx4pZ86n8hgbNyy4E -pass x -proto 4 -stales 0 -cclock 1170 -cvddc 920 -mclock 2070,2070,2010,2070,2070,2070,2070 -mvddc 920 -mt 1 -mi 11

hi, what is the command for closing and restratting the miner program.

i tried -rmode but it restarts the pc, not the program?

I don't think if my command line was correct, I see some improvement in hashrate but my 4 ramaining cards never get the increase like other card got, Im using same brand of rx 570 4gb..

my command line:

PhoenixMiner.exe -pool asia1.ethermine.org:4444 -pool2 asia1.ethermine.org:14444 -wal 0xa465*****E6F45d49ce57E************4.john1010007 -mt 2 -amd -tt 60,55,60,55,55,60,60,60,60,60,60,60 -eres 2 -wdog 1 -proto 2 -powlim -10,-10,-10,-10,-10,-10,-10,-10,-10,-10,-10,-10 -gt 45,28,45,45,45,45,45,45,45,45,45,45 -fanmin 70,70,70,70,70,70,70,70,70,70,70,70 -rmode 1 -gpureset 1


result:

main Eth speed: 327.666 MH/s, shares: 111/0/0, time: 0:22
2020.08.19:07:33:49.251: main GPUs: 1: 27.058 MH/s (11) 2: 27.933 MH/s (2) 3: 27.895 MH/s (9) 4: 25.981 MH/s (11) 5: 25.643 MH/s ( 6: 27.895 MH/s (7) 7: 25.973 MH/s (14) 8: 27.896 MH/s (10) 9: 27.899 MH/s (12) 10: 27.897 MH/s (13) 11: 27.892 MH/s (7) 12: 27.704 MH/s (7)

Hello, I have amd 470 and two 580 in rig, the problem is only "-mt 1" is working but gives low hashrate with PhoenixMiner 5.1c compare with straps in claymore. As i understand there is not more timing to choose? "-straps" is for nvidia only?

PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001 -mt 1 -cclock 1150,1200,1200 -mclock 2080,2100,2100 -cvddc 990,1050,1050

win10
20.4.2 drivers