Search content
Sort by
Showing 20 of 79 results by Havane
⭐ Merited by NotFuzzyWarm (1)
Quick news. After contacting canaan by email, they gave me a firmware. And with a command to auto-tune the frequency and voltage , it works fine at initial hashrate, with still few high temperature, but ignored.
For them, "The temperature is faulty caused by the IC temperature sensor" ,but I "could ignore the issue ,because the actual temperature is almost same with nearby IC temp. "
For them, "The temperature is faulty caused by the IC temperature sensor" ,but I "could ignore the issue ,because the actual temperature is almost same with nearby IC temp. "
Maybe the psu : after a power on off, it loops and can't mine. Will try canaan support by email.
I captured the log just before the crash and after a crash
before crash after 202s, where we have theses max value for temp : MTmax[108 74 111] MTavg[62 59 63]
https://pastebin.com/xNDqrmRG
after crash 206s, where we see "out over hot", and wrong PS value : PS[0 1214 2 0 0 1272]
https://pastebin.com/ZtejwG4x
I captured the log just before the crash and after a crash
before crash after 202s, where we have theses max value for temp : MTmax[108 74 111] MTavg[62 59 63]
https://pastebin.com/xNDqrmRG
after crash 206s, where we see "out over hot", and wrong PS value : PS[0 1214 2 0 0 1272]
https://pastebin.com/ZtejwG4x
What I guess may be the first hashboard has a bad heatsink bad adhesive or solder on that chip same on the 3rd hashboard. However, would you mind try replacing the PSU I see weird under Vo it shows 0 so it might be your PSU giving a false signal?
Thanks for your help. Where do you see "weird under V0" ? As the avalon is still under waranty, with log problem I coul'd ask for a new one
Yes maybe a problem with sensor temp ?
Since few days, I have difficulties with my Avalon1246 83T : Hashrate drops, and it reboots often. Problems occur in normal or turbo mode
Previously, It worked without problem.
Here are log and picture.
I could catch a log with SYSTEMSTATU[Work: Out Over Hot, Hash Board: 3 ] error ; but I always see 26° / 66° in the dashboard, not high
https://pastebin.com/uGH0PH9w
It's not an internet provider problem, because just next to it in the same room an other 1246 85T runs perfectly.
Note that fans run at 6500 RPM (whereas on other 1246 85T runs at 3500. Maybe it's ok)
Here a view of minerstat where ou can see it works during hours (days) and then it has problems
Any idea of the problem ?
Since few days, I have difficulties with my Avalon1246 83T : Hashrate drops, and it reboots often. Problems occur in normal or turbo mode
Previously, It worked without problem.
Here are log and picture.
I could catch a log with SYSTEMSTATU[Work: Out Over Hot, Hash Board: 3 ] error ; but I always see 26° / 66° in the dashboard, not high
https://pastebin.com/uGH0PH9w
It's not an internet provider problem, because just next to it in the same room an other 1246 85T runs perfectly.
Note that fans run at 6500 RPM (whereas on other 1246 85T runs at 3500. Maybe it's ok)
Here a view of minerstat where ou can see it works during hours (days) and then it has problems
Any idea of the problem ?
⭐ Merited by NotATether (1)
Hello
Since few days, I have difficulties with my Avalon1246 83T : Hashrate drops, and it reboots often. Problems occur in normal or turbo mode
Previously, It worked without problem.
Here are log and picture.
It's not an internet provider problem, because just next to it in the same room an other 1246 85T runs perfectly.
Note that fans run at 6500 RPM (whereas on other 1246 85T runs at 3500. Maybe it's ok)
I could catch a log with SYSTEMSTATU[Work: Out Over Hot, Hash Board: 3 ] error ; but I always see 26° / 66° in the dashboard, not high
https://pastebin.com/uGH0PH9w
Any idea of the problem ?
Since few days, I have difficulties with my Avalon1246 83T : Hashrate drops, and it reboots often. Problems occur in normal or turbo mode
Previously, It worked without problem.
Here are log and picture.
It's not an internet provider problem, because just next to it in the same room an other 1246 85T runs perfectly.
Note that fans run at 6500 RPM (whereas on other 1246 85T runs at 3500. Maybe it's ok)
I could catch a log with SYSTEMSTATU[Work: Out Over Hot, Hash Board: 3 ] error ; but I always see 26° / 66° in the dashboard, not high
https://pastebin.com/uGH0PH9w
Any idea of the problem ?
Hello
I have one avalon 1246 83T, running with the 4 fans at 6500 rpm and 65°C; And just next, one avalon 1246-N-85T, running with the 4 fans at 3500 rpm and 75°C
Is it a normal behavior ?
Is it possible to manage the speed and the temperature target ?
Thanks
I have one avalon 1246 83T, running with the 4 fans at 6500 rpm and 65°C; And just next, one avalon 1246-N-85T, running with the 4 fans at 3500 rpm and 75°C
Is it a normal behavior ?
Is it possible to manage the speed and the temperature target ?
Thanks
⭐ Merited by vapourminer (1)
Hello
Since few days, I have regular auto reboot with my miner.
Is it a normal behavior ? Nothing special in the log.
Below the chart of minerstat
https://i.postimg.cc/rF7ppFk4/My-Picture42.jpg
Since few days, I have regular auto reboot with my miner.
Is it a normal behavior ? Nothing special in the log.
Below the chart of minerstat
https://i.postimg.cc/rF7ppFk4/My-Picture42.jpg
Comparing the 17 series from bitmain to any other mining gear will always lead to the same results, those 17 series are the worst mining gears anybody has ever made, so without a doubt, the M20 and M21s are far more robust than S17/T17, but since we don't have enough data on S19/T19 we can't be certain about their quality, my bet is "they are much better than the 17 series", but are they better than the m30+/m30++/m30s from microbt? nobody can tell, it is a bit too early to judge.
But overall comparing Microbt gears to Bitmain in terms of quality, I would say MicroBt, honestly, Bitmain failed big time in the 17 series, S9k , S9e and many other non-btc mining gears, the S9 was the last mining gear from Bitmain with tremendous robustness, I hope they have gone back to the same standards on these 19 series, although I wouldn't trust them until months have passed.
But overall comparing Microbt gears to Bitmain in terms of quality, I would say MicroBt, honestly, Bitmain failed big time in the 17 series, S9k , S9e and many other non-btc mining gears, the S9 was the last mining gear from Bitmain with tremendous robustness, I hope they have gone back to the same standards on these 19 series, although I wouldn't trust them until months have passed.
And for the M32s ?
Very few review on it
One man's trash is another man's treasure...
My biggest one was buy 1 T17...
What's the problem with the T17 ?My biggest one was buy 1 T17...
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v14.7 (Windows/Linux)
Hello
Strap and rxboost don't increase my hashrate. I have rx480 and rx570 cards, latest AMD drivers on Win10, bios are moded, and I use the -cclock and -mclock option : I get ~30 Mh/s for each card.
Is it OK ? Why strap and rxboost don't increase ?
Thanks
Strap and rxboost don't increase my hashrate. I have rx480 and rx570 cards, latest AMD drivers on Win10, bios are moded, and I use the -cclock and -mclock option : I get ~30 Mh/s for each card.
Is it OK ? Why strap and rxboost don't increase ?
Thanks
Did you start ethdcrminer64.exe with admin privileges for the first time to install the driver? If your bioses are modded you can see no difference with strap mode but you should see the difference with rxboost option
Yes I ran the install driver, and now I don't have any error.
With rxboost, I 've only ~31 Mh/s instead of 30
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v14.7 (Windows/Linux)
Hello
Strap and rxboost don't increase my hashrate. I have rx480 and rx570 cards, latest AMD drivers on Win10, bios are moded, and I use the -cclock and -mclock option : I get ~30 Mh/s for each card for solo mining.
Is it OK ? Why strap and rxboost don't increase ?
Thanks
Strap and rxboost don't increase my hashrate. I have rx480 and rx570 cards, latest AMD drivers on Win10, bios are moded, and I use the -cclock and -mclock option : I get ~30 Mh/s for each card for solo mining.
Is it OK ? Why strap and rxboost don't increase ?
Thanks