LOOP[3] ON TO:0
 6: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:759) 81W 121A  49c] ASIC:[ 85c (125c) 940hz(BL: 940)   28 (E:193) F:0 L:0]
 7: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:759) 82W 122A  55c] ASIC:[ 85c (125c) 960hz(BL: 960)   38 (E:193) F:0 L:0]


I've dropped to 1.45GH was running at 1.55+ we will see how that goes.

I knew that, Just the number stuck in my head. I switched fan speed up to 8 (it was 7) and now all running at 85c
hmmm
*edit. creeping back up? 120 I'm at .69 now gonna try .65

how do I do that? they are at 288 now. will I need to set it and wait? of will it show right away? how do I know which is which

http://imageshack.com/a/img537/5430/XQJ9v8.png
http://imageshack.com/a/img537/5430/XQJ9v8.png

here's what I have. Why are some in yellow?

In garage. 30 degrees in there. Its not hot to the touch at all. psu wires not hot. I just reset to factory. maybe this will do it. time will tell.

My Sp 20 is disconnecting/ stopping mining for no reason. I have 1300PSU platinum going and it keeps knocking itself offline. The fan is still running so the only way I can tell is when I log into it, which I can't do at that point. I log into my stats page on eligius and I can see I am zero hashing. If I reboot PSU then it comes back on. Seems to be happening between every 4 and 24 hours. Is anyone else having this issue?
I have reset to factory and now trying to run. we will see how this goes.

Factory settings.



http://imageshack.com/a/img673/7374/3Rnqzh.png
http://imageshack.com/a/img673/7374/3Rnqzh.png
I had it set to this before I had the 650w power supply and was getting 1.3 for 5 straight days. Then I reset to factory.
http://imageshack.com/a/img908/3302/QixUFV.png
http://imageshack.com/a/img908/3302/QixUFV.png

Hi gang,
I'm not sure if I am having connection issues or miner issues. I can not figure out why my SP20 is going offline. It will run for a few hous or day then just drop off. It is still running so I can not tell it has dropped unless I check my user stats page on eligius. It sounds the same.
When I notice this has happened, I can log into my miner until I switch the power supplies off then back on. Then I can log in but it also starts mining again. Is this happening to anyone else? I have emailed tech support Monday but I have not heard back.
I am using 2 fortress Platinum PSU. 1-650w and 1-750w
 

I found it. It switched ip addresses on me. I have no idea why but thanks!

I have the 650 on one board and 750 on other. I think it changed my ip address. Don't know why. But I found it and was able to log in.

Hi Gang,
Have a little issue.
I just got my sp20 this week. I had a S1 w/ fortress 750 psu. So when my sp20 came I clocked it way down so I can run it with my 750w. It has been running fine @ 1.3TH but today my fortress 650 arrived. I hooked it up with the 750 and logged in to bump setting all the way up, just to see what happens. It now shuts itself down every time I turn it on. The psu are still on but it seems its in some sort of protection mode. When I switch the powers off then on again the fan on the sp 20 goes on a few secs, then off, then back on (like the normal startup) off again, then never then doesn't come back, I've tried multiple times.  I cant log into it. Any suggestions? I was thinking I screwed up a setting and had to reset but how can I do that if It won't stay on? any help would be great. Thanks

Hi Gang,
Have a little issue.
I just got my sp20 this week. I had a S1 w/ fortress 750 psu. So when my sp20 came I clocked it way down so I can run it with my 750w. It has been running fine @ 1.3TH but today my fortress 650 arrived. I hooked it up with the 750 and logged in to bump setting all the way up, just to see what happens. It now shuts itself down every time I turn it on. The psu are still on but it seems its in some sort of protection mode. When I switch the powers off then on again the fan on the sp 20 goes on a few secs, then off, then back on (like the normal startup) off again, then never then doesn't come back, I've tried multiple times. Any suggestions? I was thinking I screwed up a setting and had to reset but how can I do that if It won't stay on? any help would be great. Thanks

did you get you shipment ninja?

Sill $43.50 per day. not bad at all

that didn't work

I've posted this in a few threads in hopes that someone will see it and can help.
I just got hooked my S1 up and trying to get into ninja pool.
I followed your getting started on the pool site.
STRATUM:   stratum+tcp://24.159.196.108
PORT:   3333
Username:   Weblogin.Worker
Password:   Worker Password

I signed up for an account, added a worker, added payment address. Then went to the ip and added the above info into the antminer hit apply and save.
It doesn't show any activity when I click on miner status page. Do I have to add 3 different pools in the configuration section?
What am I missing?
I have a steady green light under the network cable and a steady red next to that with a blinking green on left. Is this correct?
Any help would be great

edit: opened cgminer added command per the directions here http://24.159.196.108/index.php?page=gettingstarted
. performed reboot.
still nothing.

Edit 2: I screwed up ip so I had to reset. I hope that didn't change anything other than the way it came. eg. firmware.

When it first turns on and it is set to default  miner config. the green led on the outside of the box is on. as soon as I set ninja pool it shuts off. and makes a clicking noise trying to start fan but it never starts.

it says Stratum in recommended. Do I have to set that anywhere? I only modified the miner config page. what am I missing?

Hi Gang,
anyone using Ninjapool?
I just hooked up my S1 and as default the thing is humming away. As soon as I enter my ninjapool info its not working. I have pm'd a few admins but maybe the public can help. I know the ninja team is very busy.


I followed the getting started on the ninjapool site.
STRATUM:   stratum+tcp://24.159.196.108
PORT:   3333
Username:   Weblogin.Worker
Password:   Worker Password

I signed up for an account, added a worker, added payment address. Then went to the ip and added the above info into the antminer hit apply and save.
It doesn't show any activity when I click on miner status page. Do I have to add 3 different pools in the configuration section?
What am I missing?
I have a steady green light under the network cable and a steady red next to that with a blinking green on left. Is this correct?
Any help would be great
edit: opened cgminer added command per you direction. performed reboot.
still nothing.
edit 2:I screwed up ip so I had to reset. I hope that didn't change anything other than the way it came. eg. firmware.

When it first turns on and it is set to default  miner config. the green led on the outside of the box is on. as soon as I set ninja pool it shuts off. and makes a clicking noise trying to start fan but it never starts.

 this is what cgminer gives me in command line.
http://i57.tinypic.com/aoxk6q.png
 

Hey Ninja.
I just got hooked up and trying to get into ninja pool. I am order # 327
I followed your getting started on the pool site.
STRATUM:   stratum+tcp://24.159.196.108
PORT:   3333
Username:   Weblogin.Worker
Password:   Worker Password

I signed up for an account, added a worker, added payment address. Then went to the ip and added the above info into the antminer hit apply and save.
It doesn't show any activity when I click on miner status page. Do I have to add 3 different pools in the configuration section?
What am I missing?
I have a steady green light under the network cable and a steady red next to that with a blinking green on left. Is this correct?
Any help would be great

edit: opened cgminer added command per you direction. performed reboot.
still nothing.

Edit 2: I screwed up ip so I had to reset. I hope that didn't change anything other than the way it came. eg. firmware.

When it first turns on and it is set to default  miner config. the green led on the outside of the box is on. as soon as I set ninja pool it shuts off. and makes a clicking noise trying to start fan but it never starts.

edit 3: this is what cgminer gives me.
http://i57.tinypic.com/rm8cvp.png[/img]

order #327 arrived today in very clean. No dripping thermal paste. Very cool Ninja. Thanks

Thanks so much!!