Search content
Sort by

Showing 2 of 2 results by J4zen
Post
Topic
Board Mining (Altcoins)
Re:
by
J4zen
on 31/08/2021, 16:55:46 UTC
The new version is finally ready. You can download PhoenixMiner 5.8a from here:

https://phoenixminer.info/downloads/PhoenixMiner_5.8a_Windows.zip
https://phoenixminer.info/downloads/PhoenixMiner_5.8a_Linux.tar.gz


Changes in version 5.8a :
  • Added lock core clock
  • Fixed an issue causing crashing with some RTX 3060/3080/3090 cards
  • Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will
    provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused
  • Increased the maximum supported DAG epoch to 600 (i.e. until about Sep 2023)
  • Implemented full hardware control for AMD RX6900/6800/6700 cards under Linux. Note that with these cards under Linux you need to specify relative core voltage: e.g. -
    cclock -50 will set the core voltage to be 50 mV under the default value
  • Added ROCr kernels for Vega, Radeon VII and Navi cards. With these kernels you will be able to run these cards with Linux drivers 20.45 and later but the performance will
    be lower than with the older PAL drivers and kernels. We recommend using AMD Linux driver 20.30 for all cards except RX6900/6800/6700
  • Fixed an issue causing crashing with some RX6900/6800/6700 cards under Linux (there is no need to run these cards with -clkernel 0 anymore)
  • Added support for AMD Windows drivers up to 21.8.1. Note that Radeon VII cards will not work with drivers 21.6.1 or higher - you need to use older drivers for proper
    operation of these cards
  • Added support for AMD Linux drivers up to 21.20 (use older drivers for Vega or Radeon VII cards as they will not work with 21.20). Note that the latest 21.30 drivers are
    not supported (and the initial testing shows that even the older Polars cards are not working properly with them, so avoid 21.30 for now)
  • Numerous other fixes and small improvements

Please let us know if you have any problems or questions related to PhoenixMiner 5.8a
Post
Topic
Board Markt
Re: Te Koop: 3 x AntMiner S7
by
J4zen
on 06/03/2016, 20:31:40 UTC
Hoi,

Naast m'n 4 AntMiner S5's, doe ik met veel spijt m'n 3 AntMiners S7 ook weg.
Ik zou nog graag de rest van m'n tijd met de buren blijven overeenkomen...
Ik had alles in m'n tuinhuis netjes opgesteld, maar dit blijkt toch te lawaaierig tijdens de nacht (in een zeer stille woonwijk).

M'n liefde voor de hobby is hierdoor zoek geraakt.

Ook voor deze jongens heb ik Ducts gemaakt:
https://dl.dropboxusercontent.com/u/35704017/S7_Pic/Photo%2022-02-16%2016%2049%2054.jpg

Hier kan dan 'tubing' van Renson op aangesloten worden:
http://www.my-electro.be/published/publicdata/MYELECTRO/attachments/SC/products_pictures/Renson-flexibel-isodecce_thm.jpg

Deze dempt het fangeluid aanzienlijk, en zorgt dat de warmte gemakkelijk kan worden afgevoerd.
Ik heb hiervan nog een ongeopende doos van 10m ter beschikking.

Graag enkel serieuze biedingen, en ophalen a.u.b.

Bedankt,

David

EDIT: Belangrijke info: Toestellen zijn alle 3 4.73THs modellen, geen maand oud (en hebben zelfs niet de hele tijd gedraaid). Liggen nu al 2 weken stil.

Hi David,

Ik heb interesse.
Kun je mij je e-mail adres per PM sturen zodat we even contact kunnen hebben?

Mvg,
Jeroen