I'm looking for somewhere in Canada as well.  Can you send me details of who you are using and any info on how it's going?

Hi

Does anyone know of a site/business that can repair an Antminer T15 has board in Canada?

 

Hi. I’m not sure if I’m posting this in the correct spot but just wondering if anyone would know why my new ledger nano s is flashing the ledger logo. It’s never been initialized and is like this out of the box. I have the most updated ledger live and USB drivers etc (windows 10-64 bit) .  If I hold the left button it will change to boot loader but after what looks like a successful reset or anything else I try on ledger manager it just goes back to the flashing logo. I do have an older nano s that works fine on the system.  I’m not having much luck with a response from ledger support so thought I’d try here.

Thanks so much this is awesome.  I'm not familiar with the eletrum UI so this was a great help!  That's the way I'm going to do it, just have to wait for the fees to drop and pick which ones to combine.   

Thanks everyone.  All great info!  I'll try these suggestions and I guess I'll pool small transactions outside of ledger in the future.

Hi.  I have my BTC stored on ledger.  Most incoming transactions have been smaller ones from my mining pool.  When i tried to send my BTC out however the transaction fee was $129 USD as I assume all the small incoming transactions creates alot of input/outputs driving up the fee.  Is there some way I can combine the balance in my ledger account so that it sends as a regular transaction with normal BTC fees?

Ok thanks for all the help!

Ledger Live shows the balance I was expecting but I can't see the new address anywhere in Live.  How would i access the address it doesn't seem linked to my Live app or my BTC account directly.

OK thanks for the reply.  Is there anyway to reverse that or recover the funds in that instance?

Hi.

Looking for some help. Yesterday I received my Ledger nano x from Ledger.  I opened the box which didn't seem tapered with at all, setup the device and recovered the wallet to it so it's the same as my existing nano s.  I then sent a test transaction for $1.00 worth of BTC to my Coinomi wallet.  The transaction all looked legit and went through fine,  fees and all it was a little over $3.00 worth of BTC 0.0004 and change.  Ledger live shows the transaction fine in the history and my ledger live balance updated to show the balance minus the funds I sent. 

However when I check blockchain explorer the transaction ID shows and additional 0.057 BTC sent from my wallet address in the same TX to an unknown bitcoin address.  My balance on blockchain explorer shows a different amount than on ledger live even after ledger live has synchronized.  On blockchain explorer the extra 0.57 BTC has been deducted from my balance but in ledger live it has it been.    So in sending a $1.00 BTC transfer i lost over $450 from my wallet.  Again I didn't send the 0.057 BTC, I checked the transaction id fees etc on the ledger before authorizing and everything seemed legit.  Does any one have any idea what's happening?  Is my ledger possibly hacked?  I"m scared to move any remaining funds as I don't want to lose more.

Received the miner.  Everything was perfect, great communication and very helpful throughout the whole process.  If anyone else is thinking of buying my went very smoothly and I wouldn’t hesitate to do it again. Thanks again!

I emailed you so I wouldn't have to post personal info.  Hopefully I found the correct email!

OK well how much for S9J and can you ship to Canada? I can ship to your location from here for about $40 so thinking it should be the same for you in reverse.

Tried to DM you but it wouldn't allow me.  can you send me a dm to discuss?  interested in S9i and S9j

---

I tried hooking a cheap router after the LTE modem and so far it seems to be working.  So thanks for that suggestion!  Fingers crossed the failover works as well as I  haven't had a chance to test that yet.  

So in case anyone else tries a similar design, to reiterate my setup is:
A wired connection from my main home router to the LTE Netgear LB2120 Modem into the WAN port.  Then from the Lan port on the 2120 i go to a cheap Dlink router and then on to the antminer.  I have the antminer set to DHCP (not static) with the auto assign DHCP tuned on in the settings of the cheap router.  The 2120 is set to bridge mode and this seems to be working. So now when there's an internet outage the 2120 should auto switch to LTE and the antminers stay connected until the hardwired connection is back online and it will then switch back from LTE to the hardwired connection.

Thanks again everyone for the help.  Cheers!

Yes it works fine as it is just a passthrough device so if i plug the ethernet cable into the miner directly from the home ISP it connects and hashes immediately. Plug the cable from the home ISP into the LTE modem and then onto a laptop that works fine, but plug it into the miner and nothing.

I have a netgear LB2120 3G/LTE modem.  The modem has a failover switch built in so if the wired internet connection goes down it switches to cellular. I tried connecting my antminers (as well as just one antminer, S9i, L3+, L3++, DR3,) to the modem but for some reason they wont detect an internet connection and will not connect.  I tried connecting the modem to a powered switch and then to the antminer and still no go.  If i plug a laptop in it works fine.  Does anyone know why this may be happening? 

When the antminer is plugged in the lights indicating an ethernet connection are not even lit up but again use the same cable to plug in a laptop and everything works perfect.  I've also tried setting the modem in bridge mode and changing the miner to a static ip etc.  Nothing seems to work as it just doesn't recognize the connection.  Any help is appreciated!

Hi.  The mining pool I was using has been blocked by my ISP.  I tried buying a USB to Ethernet adapter and bridges the connection with the existing connection and then connected to a VPN.  While webpages seem to be shielded the miner still won’t connect to the pool.  It’s connects fine to an alternate pool however. It’s also not the pool itself as a family member has miners in another location connecting to the same pool fine. Any suggestions would be great. I’m mining on an Antminer S9i.

What frequency are you mining on?

Yes but I’m not talking about Hw errors showing in the Hw column, my boards are showing some “x” instead of O. Same thing even at 400 frequency so I’m thinking some of the chips are damaged.