Just downloaded the wallet. I will keep the wallet on for a while. I hope to get some connections as someone fixes this coin. Once connected and on its way I will buy my staking coins!

Great coin for staking in a wallet. My rewards are growing. Just because the dev may not show up here doesn't mean anything. I will sit here quitly and keep collecting this coin for myself, mwahahahaaaa. Im greedy even if it never climbs in value right now!

Get the wallet and stake this!
You wont regret it.

Or, move along and leave them all to me ...

When you finally get your wallet up to date, and its staking, make sure you click on File, Backup wallet. For those who always see NOT SYNCED but also never see the bar at the lower part of their wallet, sometimes you need to shut down your wallet and delete a few files before your wallet recognizes its mistake. You can safely delete this file blk0001.dat since it will always be downloaded, replacing the one you deleated. The only real files YOU NEVER WANT TO DELETE are .... ember.conf and wallet.dat all other files and folders can be deleted in an attempt to get the wallet running propperly. Keep in mind if you delete the file called CURRENT, you will always have to download the entire block chain for the wallet, and that file will also be autogenerated back to where it belongs.

I hope this helps and lets hold these coins to 1000 sats!

everyone is welcome to add my node to their config file. I now have 4 connections so hopefully I can help bring stability to the network. I have 98% uptime usually.
addnode=99.9.201.105

Dev I have a question.

Everything was staking just fine until this happened on 8/29/17 at ... 21:05:05

ProcessBlock: ACCEPTED
ResendWalletTransactions()
SetBestChain: new best=0000000000cfd82009c050161485d8ffee91ae624bafdc3f6aa7a8e0a24c5530  height=125363  trust=25320669281273146041754  blocktrust=1259153791705  date=08/29/17 21:04:22
ProcessBlock: ACCEPTED
SetBestChain: new best=000000000069a85d3d4cb3cd77224d8ab515419ac5e9546bd4da398654141528  height=125364  trust=25320669282445843923437  blocktrust=1172697881683  date=08/29/17 21:05:05
ProcessBlock: ACCEPTED
opencon thread interrupt
msghand thread interrupt
dumpaddr thread stop
addcon thread interrupt
net thread interrupt
Shutdown : In progress...
StopNode()
Shutdown : done


Then there was a restart and ever since that restart I get this message on every attempt and my wallet in out of sync ...
ERROR: AcceptBlock() : incorrect proof-of-work
ERROR: ProcessBlock() : AcceptBlock FAILED

See Below for details, and please advice if I need to download the block chain again thanks.



Ember version v1.0.1.0-gv1.0.1.0 (Oct 25, 2016)
Using OpenSSL version OpenSSL 1.0.1t  3 May 2016
Startup time: 08/29/17 21:22:22
Default data directory C:\Users\.........
Used data directory C:\Users\.......
init message: Verifying database integrity...
dbenv.open LogDir=C:\Users\.....\Ember\database ErrorFile=C:\Users\........\AppData\Roaming\Ember\db.log
Bound to [::]:10024
Bound to 0.0.0.0:10024
init message: Loading block index...
Opening LevelDB in C:\Users\.........\AppData\Roaming\Ember\txleveldb
Transaction index version is 70509
Opened LevelDB successfully
LoadBlockIndex(): hashBestChain=e707b47e7c6b70c7bf71753cce26e491e042d31bb2270b510c92227d6a7c40e3  height=125331  trust=6812202100334525910  date=08/29/17 20:29:36
LoadBlockIndex(): synchronized checkpoint 000000000169a1efb1b338b961bd2ed37d733e885505007c9c518a256e0f1f61
Verifying last 500 blocks at level 1
 block index            3797ms
init message: Loading wallet...
nFileVersion = 1000100
Keys: 105 plaintext, 0 encrypted, 105 w/ metadata, 105 total
 wallet                   47ms
init message: Rescanning...
Rescanning last 232 blocks (from block 125099)...
AddToWallet a25a56d21aa457ddb6a7bfacb84350382e7c0a86adb4c23d3610c99e1508f551 
 rescan                   47ms
init message: Loading addresses...
Loaded 4189 addresses from peers.dat  31ms
mapBlockIndex.size() = 125445
nBestHeight = 125331
setKeyPool.size() = 100
mapWallet.size() = 123
mapAddressBook.size() = 3
AddLocal([2602:306:309c:9690:d165:dbf2:a8c6:bd34]:10024,1)
AddLocal([2602:306:309c:9690::20]:10024,1)
AddLocal([2602:306:309c:9690:3c3c:3ac9:96cb:72c3]:10024,1)
AddLocal([2001:0:68ef:cf2c:3094:35ce:3f57:fe5f]:10024,1)
dnsseed thread start
msghand thread start
net thread start
dumpaddr thread start
addcon thread start
opencon thread start
init message: Done loading
Loading addresses from DNS seeds (could take a while)
0 addresses found from DNS seeds
dnsseed thread exit
socket recv error 10054
receive version message: version 60016, blocks=125370, us=[2602:306:309c:9690:d165:dbf2:a8c6:bd34]:49744, them=[2a02:c207:2012:2672::1]:10024, peer=[2a02:c207:2012:2672::1]:10024
Added time data, samples 2, offset -6 (+0 minutes)
ProcessBlock: ORPHAN BLOCK 0, prev=00000000003d5eb38dc0ae36541c3b4a0668009918628f36ef4637751a69fa51
ERROR: AcceptBlock() : incorrect proof-of-work
ERROR: ProcessBlock() : AcceptBlock FAILED
Misbehaving: [2a02:c207:2012:2672::1]:10024 (0 -> 100) DISCONNECTING
socket recv error 10054
receive version message: version 60016, blocks=125371, us=[2602:306:309c:9690:d165:dbf2:a8c6:bd34]:49961, them=[2a02:1205:c689:4c10:45:99c1:ae40:9d12]:10024, peer=[2a02:1205:c689:4c10:45:99c1:ae40:9d12]:10024
Added time data, samples 3, offset -5 (+0 minutes)
ERROR: AcceptToMemoryPool : nonstandard transaction: non-final
ERROR: AcceptBlock() : incorrect proof-of-work
ERROR: ProcessBlock() : AcceptBlock FAILED
Misbehaving: [2a02:1205:c689:4c10:45:99c1:ae40:9d12]:10024 (0 -> 100) DISCONNECTING

Yobit has it !!!

I just downloaded the wallet and happy to be a part of this coins community. Here is the config settings in my file ...

iWalletCoin.conf
rpcuser=user
rpcpassword=pass
rpcport=40092
port=40093
#(0=off, 1=on) daemon - run in the background as a daemon and accept commands
daemon=0
#(0=off, 1=on) server - accept command line and JSON-RPC commands
server=0
rpcallowip=127.0.0.1
testnet=0
addnode=95.85.55.160
addnode=85.175.216.200:40093
addnode=185.203.119.105:40093
addnode=wmikrut.com:21016
listen=1

What do I need to do to be a Supernode to help this network?

Just downloaded the wallet and the block chain.

paypeer.conf
port: 1111

In it for the long haul !

Just downloaded the wallet and am staking! Glad to support this coin!

We need a working wallet to download, the only working link doesn't download the exe. Please PM me if this coin ever has a working wallet. Thanks!

Im really sad. I have downloaded every possible wallet for Chess coin and I never get a connection. I created the ChessCoin.conf file and still I never get a connection. What is really sad is that supposedly Yobit has found the correct blockchain but yet no one can give access to otheres so they can download the block chain. I really want to support the network. I currently support 20 other coins on my computer via staking. This wallet graphic work is too good to not let others see and use.

I even read where somone placed a link to an explorer. I am tempted to download the explorer and learn it to make myself a masternode for this coin. The only thing holding me back is I am not sure if thats how a coin gets created. So if someone can give me more information about the explorer, and explain to me if the explorer is what is used, I might make an attempt to Fork this coin, but I need someone smarter then me to just tell me.

I am not afraid to just DO IT, I have coded an online game with JAVASCRIPT so this will just elevate my knowledge. Please point me in the right direction. Thanks

I want to help with this coin. Here are the ports ....
RPC port : 3531
p2p port : 3530

I have only been into crypto for 8 months but am doing good. Im gonna look at the code and see if I download it from GitHub if it makes me a master node and if it does then I will put my IP here.

Your link doesn't work.
I personally dont care if there is a swap. I like HTML5 and maybe one day I can assist in making this a great coin again. Just downloaded the wallet.

I tried to connect to this but received a timed out error, besides I also dont have any connections with the wallet, but I will let it run and see what happens.

This is my second attempt and I am glad I made it. I downloaded the wallet again and finally saw where I can download the blockchain from the website. http://hobonickels.info/HBNBlockChain.zip

I received the folder called txleveldb and two other files, blk0001 and blk0002. I then restarted my wallet and I still see I have 4 years worth of downloads, and I don't have any connections.  I named my conf file hobo.conf and here is what is inside of it ...

listen=1
daemon=1
server=1
rpcuser=name
rpcpassword=phrase
port=7372
rpcport=7373
rpcconnect=127.0.0.1
addnode=69.85.86.195
addnode=74.196.48.62
addnode 5.9.48.68:7372
addnode 68.168.176.187:7372
addnode 69.181.165.105:7372
addnode 176.37.67.61:7372
addnode 87.98.159.143:7372
addnode 153.161.96.219:7372
addnode 83.34.249.234:7372
addnode 77.239.37.12:7372
addnode 68.106.230.16:7372
addnode 83.78.248.210:7372
addnode 80.56.92.208:7372
addnode 193.91.244.60:7372
addnode 50.34.126.230:7372
addnode 72.184.183.243:7372
addnode 173.50.96.220:7372

What I am missing here?

Thanks for the link, I downloaded the GPU and CPU versions and now I will wait to run the GPU when I get my 2nd video card, and the CPU i will test as soon as I have time. This is my first time so I know its gonna be a little tough to learn.

Is there any info on how I can become a SuperNode Dev? I would like to help you more, by support this network more.

Thank you for that last reply.

In concluding I understand this coin is a CPU/RAM coin of which I built my system around this same idea. I hope this coin sticks to the whitepaper ...

By now scrypt has already been applied in Litecoin [14] and some other Bitcoin forks.  How-
ever, its implementation is not really memory-bound:  the ratio “memory access time / overall
time” is not large enough because each instance uses only 128 KB. This permits GPU miners
to be roughly 10 times more effective and continues to leave the possibility of creating relatively
cheap but highly-efficient mining devices.

Moreover, the scrypt construction itself allows a linear trade-off between memory size and
CPU speed due to the fact that every block in the scratchpad is derived only from the previous.
For example, you can store every second block and recalculate the others in a lazy way, i.e.  only
when it becomes necessary.

This in turn implies that a machine with a CPU
200 times faster than the modern chips can store only 320 bytes of the scratchpad.

5.2    The proposed algorithm
We propose a new memory-bound algorithm for the proof-of-work pricing function.  It relies on
random access to a slow memory and emphasizes latency dependence. As opposed to scrypt every
new block (64 bytes in length) depends on all the previous blocks.  As a result a hypothetical
“memory-saver” should increase his calculation speed exponentially.
Our algorithm requires about 2 Mb per instance for the following reasons:
1.  It fits in the L3 cache (per core) of modern processors, which should become mainstream
in a few years;


Summary
Block time: 240 seconds  (Every 4 minutes)
Difficulty: re-targets at every block

So let me see if I understand this. CCMiner is basically just another NiceHash? I say that because no matter what, I have to use a pool to mine a coin?

Funny - I find it amazing how i'm smart enough to figure out how to solo mine. Why would you say I need to run my own pool?

Wallet says:
[wallet WmsJVr]: start_mining 1
Mining started in daemon
[wallet WmsJVr]:

Server says:
Mining has started with 1 threads, good luck!

Thanks for your help, I'm gonna make some adjustments now and rock this!

Hi I recently built a rig with an NVIDIA1080ti card and i7 processor. I am staking coins but am also trying to figure out how to solo mine. I currently mine with NiceHash but I want to at least solo mine even if it's just to learn a few things. So far I downloaded the server and client for AEON. This coin is my first attempt to solo. My server node is running and my wallet is open.

I believe I need a config file so I created this ... I have this saved in my folder where the server and client are, Or do I need to have this in the ccminer foiolder?
rpcuser=xxxxxx    (( walletname ))
rpcpassword=xxxxx   (( wpassowrd ))
rpcallowip=127.0.0.1
rpcport=11180
port=11181
gen=0
server=1
addnode=94.130.32.60:11180
addnode=98.165.192.54:11180
addnode=5.9.40.202:11180
addnode=91.219.164.176:11180

I also made my bat file ... I have this in my ccminer folder and double click it to start the miner.
ccminer-x64.exe -q -a cryptolight -o http://127.0.0.1:11180/ -u walletname  -p wpassowrd

When the miner starts its so fast when it opens, but it also closes just as fast and I cant really read the red error I am getting. Would someone be so kind to help me. Thanks !!!

HI Everyone. Because I like this coin so much and I dont see an image for the coin, I took the liberty of creating one and hope everyone will accept it as the image for the coin. If not no big deal maybe I can make a different one.
http://s3.postimg.org/pg03xgzar/wam.png