Hi. Airdrop please.

My PCN ADD :
PMVuCQ6tSguJ55Sb7kJHR1EcEabPRxgwE7

My VESTX ADD :
UKpU68rMtgFM9JosBwiULr3hyTQPp339tY

I sent 1 PCN to:
PKtgDjKznWv4ve9sQGNWTh4kRpCEgLmK43

TXID:
fb015b94bb01a52b1148ad71ead23e3d799f693a5df8abc0e6093ffb4296284c

Yep, well said philipma!

I have used it on about 20 L3+ so far.  That might go up based on reliability of the modded units. 
The big benefit for me is not the $ saving on electricity or any boost in hashrate. 
It reduces my overall temps and pulls my electrical current consumption back to safer levels. 
The drop in temps is very dramatic, 3-4 degrees C per board. 
I was planning to monitor my machines for a while more before donating, but it's worth .25 LTC and more to me, so here's my first transfer. 
There will be more if I'm still happy in a month or so.

https://live.blockcypher.com/ltc/tx/ab4d415f25773ceca707831a8600528366078fca2fba5fb5ccfb454eb393ad27/

Hi.  I'm just a miner and follower, not part of the team.  
There were some initial issues with staking but it's working great right now.  I'm getting about what I'd expect, and very regular.  
I guess teething problems were only to be expected when you consider that many years worth of flappycoin were converted within a few hours and all started stakng as flapx at the same time.  
I've also mined flapx near the start and I had no problems at all with the mining side.  Full disclosure, I'm not mining flapx right at this minute.  
I will mine it again depending on how my rigs are doing on other coins.  
The team are going way beyond the normal standards with this swap.  
They're still doing manual swaps for people and providing great help over on Discord.  
You really need to get yourself across to the discord channel.  This has been repeatedly stated and I'm saying it again.  Just look at recent posts in this forum.  
There is one discord channel for flappy and also a new one for FlapX.  I can only give invites to the old flappy one, but it is still running and you can make contact with the team there.

https://discord.gg/fvZ2c

The above link is time-limited, so get it while it's hot.

Here's a few for entry via debug window:

addnode 100.34.15.63:11556 add
addnode 94.61.193.156:11556 add
addnode 159.65.65.206:11556 add
addnode 187.163.195.24:11556 add
addnode 13.57.31.176:11556 add
addnode 144.76.174.21:11556 add


Or for the flappycoin.conf file:

addnode=100.34.15.63:11556
addnode=94.61.193.156:11556
addnode=159.65.65.206:11556
addnode=187.163.195.24:11556
addnode=13.57.31.176:11556
addnode=144.76.174.21:11556


But if you're not picking up nodes, it's more likely that you're on the wrong chain.  The current blockheight should be 1142352, but use one the explorers on page 1 for the height in real-time.

It seems that you have already joined the Discord link, so we can skip that.
DEADLINE:  You must have transferred all your current Flappy balances to your Discord FLAP address prior to 14-APR-2018.

1/  Make sure you are on wallet v5.5.5.0.

2/  Make sure the wallet is fully synced and on the right blockheight, using one of the block explorers on page 1 of this [ANN] thread. (Current blockheight is 1138301, but please check again in real-time).

3/  Go to the Discord Flappycoin Arcade channel and "casino_flap".
          Get your Discord FLAP address:
                Type:    !address
                Copy your address and maybe add it directly to the address book in your Flappy wallet.

4/  In your wallet, send a test amount [say 1000 FLAP] to your Discord FLAP address.
                Watch your wallet until the transaction is fully matured and give it another 5 minutes or so.

5/  Go back to Discord, "casino_flap" (or "tipbot", if you like).
                Type in:     !balance flap  
(if you're ok with the balance being displayed to all)   or
                Type in:   !summary private
(if you want to get your balance in a PM from the tipbot)

6/  If all is well and your coins transferred ok, go ahead with the rest of the transfers until your entire balance is on your Discord FLAP address.

7/  Once it's all there and you've checked the balance again via the tipbot, take a screenshot and keep it safe.

8/  On 14th, your balance should be swapped to FlapX, at 100:1 ratio.  You SHOULD then be able to transfer it out to your wallet.


NOTE:  I suggest before transferring your new FlapX out from the discord address, check for info on Discord, Twitter & Crypto-city for any changes or news.

NOTE:  You might hit up against sending limits transferring from your wallet (I did & was helped out by the Discord users).  Use coin-control to either combine your balances or just select a limited number of transactions as inputs on each send.  Also, there is a max amount of coins you can send in one TX.  Find it by typing 999999.... until it stops!


That's how it SHOULD work, as far as I know.



EDIT:  You will get better and faster answers if you ask any questions on Discord, which is where they all hang out now.

Thanks for that!  Sounds like there's a bit of incompatibility between v.1.0.2.2 and v.1.0.3.3 as well!  I'm windows v.1.0.2.2 and it's at the correct blockheight.  I'm only staking at the moment and it seems to be working ok.  Only connecting to 2 nodes, though!  I was mining a bit at Razorgames recently on v.1.0.2.2 and that was working ok.  I only stopped because I have more rigs than electrical capacity and I wasn't going to run D3 rigs while I had L3's sitting in boxes.

Where did you hear about a new wallet?  I haven't seen it mentioned anywhere and the dev isn't active at the moment.  He hasn't abandoned it, he just has other concerns.

There are XPTX coins in my account for a couple of weeks now, which haven't been paid out. 
The pool was still mining XPTX at the time as well.
XPTX wallet:   

PUQjGx56xM2RpaiYvfJEHxvjJV7f1mDH6Z

Same here, 13 stake transactions on the new wallet since yesterday, all "generated but not accepted".  I re-started the wallet and now I've had 1 stake and it has 1 confirmation so far.  Maybe a wallet restart is all it needs.



EDIT:  Nope, checked blockexplorer, wrong blockheight, so I guess wrong chain.  Re-downloading....

What do we put in the win 7 conf file to disable auto-minting to zPIV?
Also, what about those of us who had 40%+ converted involuntarily?  
And what about the charges for converting both ways?