is there any issue knowed ?

if the miner stop mining and reboot,
it will hand at Init, If I will access the Miner via Remotedesktop or Teamviewer, it will continue and will mine without any issue,

Warning - virus inside of the software 5.5D 😡

Have someone infos ? And what are to expact to mining users?

Is mining ETH then also possible ?

https://tokenthusiast.com/2018/04/02/ffg-casper-will-reduce-proof-of-work-miners-block-reward-to-0-6-eth/

A ok, thanks
Not worth to upgrade then from 18.3.3

Thank
Paul

New amd radeon driver released with fixes for blockchain use
Have someone allready try it ?

Radeon Software Adrenalin Edition 18.3.4 Highlights

Fixed Issues
Some blockchain workloads may experience lower performance than expected when compared to previous Radeon Software releases.

What i should set the on the -ethi switch for ETH ?
Leave it on default 8 or should i set it to 16 ?
Rigs are all stabil, will i get more shares, if I set it on 16 ? And how much I can go up ?

Is the Claymore Remote Monitor also for IPAD available or something like this, to overview my 4 rigs

And also the heat and power uses goes up with dual mining,
I also stoped it, because i need additional cooling and an extra power supply to
And it is not woth the requirement at this prices for it
I was on ETH and decred as second one

what is this in my log ?
after this my Miner crashed



15:53:30:964   828   checked ETH share on CPU, spent 3ms
15:53:30:964   828   ETH: put share nonce af7ca3f01b3b757a
15:53:30:964   828   ETH round found 1 shares

Got also had a working rig with 12 radeon r9 390 stabile running, but power use is high, i need 3 PSU to run it
At this time 3 cards are down (power supply cable burns out), rest still works

I also had a second rig with 10GPUs with the 4pin connector riser cards an an asus p10ws stabile for weeks

Is there an solution, so that wattman will not reset the settings ?
I have not overclocked, some cards will set at a less gpu clock, to keep the temp lower,
But sometime wattman crashes and reset all and then overheats my room :-)
minersoftware will not crash only wattmann,

There is also a new AMD driver available 18.2.1, hope it is better,
Got 2 rigs with 12 AMD R9 390 and the consume much and also produce much heat

How much stale shares per hour are normal ?
Got 5% average, and sometimes 10-12%

And does the GPU powersaving option in the settings reduce the Hashrate and power cosume too ? - never try this yet
Because I will get a overheating problem in my serverroom with my 18 r9 390 cards, any hints ?

He mean to use the RAM of the GPU to decrypt ETH
And use the CPU of the GPU to mine somethink other,

Works, but you need more Power and also produce more heat from the Cards,
Because mining of ETH dont use the GPU to mine, most time the use the memory to mine ETH,
And a little of the GPU,
DCR and much other currencies can be mined on the CPU of the Display card while mining ETH on the same Card

I got an really bad virus on my netzworkserver last day,
 i think it was comming over the miningsoftware or eth-proxy, witch run on the server,
because no users works on it, not software was on it, and it runs over 5 years without any shutdowns or issues,  I installed ETH-proxy last week on it, and trobels began
We also have AV and a Sonicwall installed too
I hope, I dont open a Backdoor with the proxy over it,
Because I checked the LOGs from the server, and it comes over Remote Access
And encrypt the hole server, my luck was a Tape Backup

Is there a workaround for the temp display ?
I will only get the temp for GPU 0 and the other will not be showed,
Same on 2 rigs

Claymore 12.6,
Claymore 12.5 shows temp correct

Whats about memory ? You only got 4 GB of RAM ?
Little less ?

I dont understand I get 29MH/s without overclocking on my 20 R9 390, the only problem is the heat

I have also try to mine DCR while mining ETH

But the hashrate of ETH has falling arround 20MH/s at my 550MH/s rig,
But the main problem was the rising to the Power of my 2 RIGs what is needed,
So it overloads my PSU massive, and I also get much more heat out and need additional fans too
So I Stop mining DCR and has stayed on ETH only

How I can find out, witch riser are fine ?