what do you mean under patching ? just upgrade or something else ?

how about a link to this patch.exe that you've got? or atleast tell us where to get it lol

UPDATE: To answer my own question here.  The latest Crimson drivers 16.12 has turn back on the signature checking.  So stick with 16.9-16.11.  Secondly it appears that over time the amount of overclock on the memory on my RX470 Sapphire 8gb cards has slowed down.  This is causing the system to flat not boot.  I had to experiment with slower and slower memory timings to get it working again.  So still a mild overclock on the memory, but a big decrease from what it was using and working well with.  So my ROM's suddenly were not working.  Retuned a ROM and have it working for the time being.  Have to keep an eye on it to see if I need to tweak it some more.

So if you suddenly start having weird behavior you may need to take another look at your ROM's.  I still have another rig happily running on that old ROM.  So something to do with the cards not able to handle the same speeds as before.
------------------------------------------------------------------------------------------------------------------------
HELP!  I need someone to sanity check me here.  I have a rig that I decided to throw a couple more GPU's in it.  I has been running with a custom rom this entire time.  I built this back last summer.  

I thought I had documented all the steps to do the flash, the drivers etc, but apparently I was wrong.  After adding the 2 new cards and flashing them to the same rom as the others one by one.  I assumed since nothing else had changed it would come right back up after the reboot.  

Well it turned out there was going to be a battle getting all the boards recognized and the system to boot.  Finally get it to post and all the boards to be seen by the OS, but all of the devices show the exclamation mark next to them and won't load.  Spent several hours messing with it.  Upgraded the drivers to the latest from AMD.  Still no dice.  

So out of frustration I put the stock roms back on the boards and finally after some mucking around for a while I got the system back up on stock roms and hashing away.  

So I try again this morning to flash the boards to a known good custom rom and I am back into the same mess with exclamation marks next to all the cards in device manager.  So here are my steps.  Please tell me what I am missing.  Is there a newer atikmdag.sys file that I should be using?  I am using one from August.

1) remove all cards but 1
2) boot into windows
3) flash card with desired rom, load up atiwinflash with admin
4) Click load and select new BIOS  > click program
5) wait...screen will hang for about 30-40 secs
6) on confirmation box close
7) in device manager right click GPU and uninstall
reboot
9) card should be redetect but now you are in vga mode as it will fail to load driver.
10) hit windows button and power then holding shift click restart, select troubleshoot, adv, restart options, click restart
11) hit 4 on option screen
12) now in safe mode replace the ati file you need into c:\windows\system32\drivers\atikmdag.sys (overwrite).
13) Use the dseo13b.exe to sign the atikmdag.sys file.
14) bcdedit.exe -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit.exe -set TESTSIGNING ON
15) hit windows button and power then holding shift click restart, select troubleshoot, adv, restart options, click restart
16) select option 7
17) you should now boot up with mod driver and mod bios all working...if not you did some thing wrong. go back to step 9

Ok is there possible for you to give me team viewer so i could login to this rig end debug it ?
If yes then please write to me at admin@simplemining.net

Also i have other guy which will give me access in few minutes so meaby i will see whats going on there.

the RX series is new still and it is reasonable for there to be problems!

Ok good to know...
I had little stress becasue of this

I rushed this fan script not totally tested becasue new opt miner in deed took a lot of wattage.
It had only problem spinning it up, it was spinning but too slow
Anyway still i saw some single rigs with temps like 88 C so i am wondering why ...

Anyway i will focus on perfecting this temperature/fan speed becasue it is very important !
Its so much work to do fuck
It would be easier if i ask already people for 1$/rig/month - i could focus much more time

RX oesnt support 200 series.

UPDATE V1026
- RX OS auto fan controll set to 76 C.
Tomorrow i will try to release option in dashboard so you could set your own target temperature.
I will also try tomorrow make R OS auto fan controll.

correct


quick check for everybody
(many here asked the same, so lets summarize)

1) have a  woring erc v2 wallet
2) have a working v3 wallet
3) on swapserver, press "account"
4) save your v3 address there
5) press "deposit"
6) press to regenerate a fresh address and copy it
7) use this address, to go to your ERC v2 wallet and use the copiedaddress, to send your coins
9) lay back an wait, latest to receive your coins is Mondey
10) enjoy!

have fun
Matthias




.

yes, someone knows. Nothing is lost. You might have to go through various other versions maybe.

https://monerobase.com/Binaries

whatever you do, backup those original binaries.

All the simplewallet binaries should theoretically be able to communicate with the new daemon, so just try the most recent simplewallet binaries until you can open your wallet files.