Search content
Sort by
Showing 20 of 35 results by Lio78
Re: SRBMiner Cryptonight AMD GPU Miner V1.8.3 - native algo switching
Hello, u will support uplexa new algo:UPXTWO ?
Quote
Re: SRBMiner Cryptonight AMD GPU Miner V1.6.8 - V8 & algo switching
I have switched in v8 from v7 work well and I can confirm a little bit less Hashrate.
v7 I had about 3030 Hs
v8 I have 2950 Hs
Thank you Doc.
EDIT: v8 I have 2920 Hs
v7 I had about 3030 Hs
v8 I have 2950 Hs
Thank you Doc.
EDIT: v8 I have 2920 Hs
Re: SRBMiner Cryptonight AMD GPU Miner V1.6.8 - V8 & algo switching
Hi, I have this message from my pool.
"low difficulty share" if I use v8 instead v7
I use SRBMiner 1.6.8 with Vega64 and RX580.
Anyone can help me please?
"low difficulty share" if I use v8 instead v7
I use SRBMiner 1.6.8 with Vega64 and RX580.
Anyone can help me please?
Dont use V8 yet, Monero still haven't switch
Thank you Doctor
I don't want to sound ungrateful or anything, but you seem to be wasting your talent on things that don't matter in mining. Forget about the GUI, it just brings bugs and its actually harder to work with. Forget the fancy auto overclocks and straps etc...
What we AMD miners really need is good kernels for profitable algos. Give us that and you will have more then enough money and users with a resonable fee for your miner. I tried using your miner a few times, but in the end I only have problems with the GUI and some obscure bugs because of that. And in the end other miners are simply faster and easier to use because of the command line.
Just my 2 cents, don't waste your potential.
P.S. I am sorry if I sounded hars, but I am always blunt and to the point, ubable to sugarcoat.
What we AMD miners really need is good kernels for profitable algos. Give us that and you will have more then enough money and users with a resonable fee for your miner. I tried using your miner a few times, but in the end I only have problems with the GUI and some obscure bugs because of that. And in the end other miners are simply faster and easier to use because of the command line.
Just my 2 cents, don't waste your potential.
P.S. I am sorry if I sounded hars, but I am always blunt and to the point, ubable to sugarcoat.
I don't mind the language at all. You probably don't know, however, that I did write the fastest kernels for some of the algorithms
before, both open-source and private. It is just that I personally prefer GUI over CUI and I don't like the user interface of other miners at all.
I will better document the command-line version and work on kernels.
In fact, you will see significantly improved Ethash kernels very soon.
I ended up choosing the 84 VGPR's version over 64 VGPR's version, and I am tweaking default settings right now.
I think your GUI is very usefull and in CN7 your kernel is very good, maybe not the best but very very similar result.
I love the semplicity to set up voltage and clock.
I think is a great work from zawawa, obviously improvable, but great.
I hope to see your new work very soon, I work with 1.3.7 and 15.8.1 adrenaline driver because is most stable for me of 1.3.8.
Hi zawawa, any news for new works?
I am preparing a new development environment as
I got a funding for a major rewrite for the project.
I should be able to come up with a light-weight command-line version
as well as a Linux version. We shall see...
Good work zawawa...
Gateless Gate Sharp 1.3.8 alpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.3.8-alpha
* Improved the "Boost Performance" feature.
* Improved benchmarking/optimization.
* Updated installer.
* Fixed compatibility issues with recent AMD drivers.
* Added automatic configuration for WattMan.
* Fixed compatibility issues with CryptoNight variants.
I still need some time to work on Ethash, so I just uploaded the current version on GitHub.
It should be pretty useful, though. Enjoy!
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.3.8-alpha
* Improved the "Boost Performance" feature.
* Improved benchmarking/optimization.
* Updated installer.
* Fixed compatibility issues with recent AMD drivers.
* Added automatic configuration for WattMan.
* Fixed compatibility issues with CryptoNight variants.
I still need some time to work on Ethash, so I just uploaded the current version on GitHub.
It should be pretty useful, though. Enjoy!
Thank you for new release but I have some problem.
With same configuration of 1.3.7 hashrate is decreased about 100/150 and afetr 1 minute my PC is blocked.
"relaunch" button don't work, close program but don't reopen.
When I active GGS after PC reboot video driver is restarted with black screen.
Now I try to download again and I will install again, I hope it resolve this problem.
I will report this.
Video drivers were restarted after Registry entries had been updated.
If you have Vega, I would recommend the Boost button.
Yes, I have 1 Vega and 1 RX580 but this have BIOS mod.
Can I use boost mode anyway?
For now I have uninstall 1.3.8 and now I use 1.3.7 without problem.
I am working on overclocking again right now. I will push the next version soon...
Ok, thank you so much.
Gateless Gate Sharp 1.3.8 alpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.3.8-alpha
* Improved the "Boost Performance" feature.
* Improved benchmarking/optimization.
* Updated installer.
* Fixed compatibility issues with recent AMD drivers.
* Added automatic configuration for WattMan.
* Fixed compatibility issues with CryptoNight variants.
I still need some time to work on Ethash, so I just uploaded the current version on GitHub.
It should be pretty useful, though. Enjoy!
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.3.8-alpha
* Improved the "Boost Performance" feature.
* Improved benchmarking/optimization.
* Updated installer.
* Fixed compatibility issues with recent AMD drivers.
* Added automatic configuration for WattMan.
* Fixed compatibility issues with CryptoNight variants.
I still need some time to work on Ethash, so I just uploaded the current version on GitHub.
It should be pretty useful, though. Enjoy!
Thank you for new release but I have some problem.
With same configuration of 1.3.7 hashrate is decreased about 100/150 and afetr 1 minute my PC is blocked.
"relaunch" button don't work, close program but don't reopen.
When I active GGS after PC reboot video driver is restarted with black screen.
Now I try to download again and I will install again, I hope it resolve this problem.
I will report this.
Video drivers were restarted after Registry entries had been updated.
If you have Vega, I would recommend the Boost button.
Yes, I have 1 Vega and 1 RX580 but this have BIOS mod.
Can I use boost mode anyway?
For now I have uninstall 1.3.8 and now I use 1.3.7 without problem.
Gateless Gate Sharp 1.3.8 alpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.3.8-alpha
* Improved the "Boost Performance" feature.
* Improved benchmarking/optimization.
* Updated installer.
* Fixed compatibility issues with recent AMD drivers.
* Added automatic configuration for WattMan.
* Fixed compatibility issues with CryptoNight variants.
I still need some time to work on Ethash, so I just uploaded the current version on GitHub.
It should be pretty useful, though. Enjoy!
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.3.8-alpha
* Improved the "Boost Performance" feature.
* Improved benchmarking/optimization.
* Updated installer.
* Fixed compatibility issues with recent AMD drivers.
* Added automatic configuration for WattMan.
* Fixed compatibility issues with CryptoNight variants.
I still need some time to work on Ethash, so I just uploaded the current version on GitHub.
It should be pretty useful, though. Enjoy!
Thank you for new release but I have some problem.
With same configuration of 1.3.7 hashrate is decreased about 100/150 and afetr 1 minute my PC is blocked.
"relaunch" button don't work, close program but don't reopen.
When I active GGS after PC reboot video driver is restarted with black screen.
Now I try to download again and I will install again, I hope it resolve this problem.
I will report this.
The new update 18xx by Microsoft is a big problem for miners, don't install it.
My Vega is stable with new setting, I have disable GGS setting for it and modify registry setting.
Good compromise to have 1850H/s and 110W for me with this card.
Anyway I modify setting for my RX580 with GGS as well.
Now I cannot see GGS setting, there is a setting for restart miner in case of hasrate go down?
Thank you and good work zawawa
My Vega is stable with new setting, I have disable GGS setting for it and modify registry setting.
Good compromise to have 1850H/s and 110W for me with this card.
Anyway I modify setting for my RX580 with GGS as well.
Now I cannot see GGS setting, there is a setting for restart miner in case of hasrate go down?
Thank you and good work zawawa
Not bad, not bad... I guess I could take care of power consumption later.
https://i.imgur.com/VhTukXa.png
https://i.imgur.com/VhTukXa.png
what is the cclock, mclock, intensity? is this hynix or samsung?
i can confirm that...there is no magic ´to get this speed with that powerdraw. with the right configs/mods its easy to get >2k on a vega56 with half ot the powerconsumption
Yeah, It's true, now I have found a good setting for very low conumption and good hashrate with vega 64.
I have 1880H/s and 115W, CN7 and always GGS.
Now I test this setting if are rock solid.
Hi Zawawa
Your miner is the best I have tried.
Have a good GUI, more info, more setting and more faster then other.
I have 1 RX Vega 64 and 1 RX 580, and I have 1.7KH/s and 180W for vega and 950H/s and 65W for RX 580, in cryptonight v7.
Maybe I can work a little bit more on setting of my vega.
Thank you so much
Your miner is the best I have tried.
Have a good GUI, more info, more setting and more faster then other.
I have 1 RX Vega 64 and 1 RX 580, and I have 1.7KH/s and 180W for vega and 950H/s and 65W for RX 580, in cryptonight v7.
Maybe I can work a little bit more on setting of my vega.
Thank you so much
Re: [ANN][Mining OS] Cowry - OS for mining and for AI/Machine Learning marketplace
Have you any ETA for support RX VEGA?
The issue is the broken driver from AMD. If they fix it, it will work but I don't foresee when will we have time to investigate the issue with the driver.
Thank you.