I saw this

-rmode Selects the restart mode when a GPU crashes or freezes:
     0: disabled - miner will shut down instead of restarting
     1: restart with the same command line options - this is the default
     2: reboot (shut down miner and execute reboot.bat)

but when I download PM not include reboot.bat file.

Fridays are always good so then you can get another weekend out of another lame excuse.

For people who still think it's a scam :

- no batch 2 yet on the website (which would be clear that it's a scam)
- dwarfminer team still responding on the forum (which there is no point of if it was a scam and the orders are completed so they could absolutely already have run with the money)

I'm just saying that those two points, in particular the last one give a good indication that it might not be a scam

Personnaly, if I was running such a scam I would have already left with the money. Wouldn't you ?

If this card works as intended, they will sell like hot cake on batch2 and they will make even much more money. They probably have a 50% margin on BOM and second batch will be full price so more than $200 of benefit per card for a batch of 25000 => $5 millions profit without even to have to set up a mining farm and taking the risk of a crypto bear market.

In the gold rush the people who were making money were the pickaxe vendors

Fear = No risk/Play it safe = Smart = Boring/No emotional attachment = No possibilitiy of pleasure or pain
No Fear = Take risk/Experiment = Not Smart = Exciting/Emotionally attached = Possibiblity of pleasure or pain

Human beings fall into 1 of 2 of these categories. Regardless of industry there will always be a place for innovation, and along with it will always come the scammers.  I myself have taken a calculated risk and purchased this...I am sure thousands of others did for all these units to sell out.

6x RX 580s (185W x 6) is an overload for a 1,200W PSU.
Even though that model has 100A on its +12v rail, it is still at its peak with a 1110W load (only have 90W window).
Since you're mining Ethereum, it's alright to underclock to lower the power consumption, or use only 5 GPUs for now.

And this bugs me: "my friend has two rigs with 2 x 6 RX 580 sapphire nitro 8gb"
Two rigs with 2x6 RX580, means 12GPU in each rig? No, right? so 6GPUs each.

The error is pretty normal and shouldn't cause a reboot,
both of the rigs seems out of juice that can trigger a shutdown but your BIOS was set to restart whenever the system was abruptly powered down.

ty for answer..but not whole rig..i want to restart my rig when gpu freeze or miner..claymore using -r 1...phoenix ? i am using  -rmode 2 but didnt work

Is there a way to name the rig besides putting it behind the wallet address?  My pool doesn't like that format...

so noone doing restart their rigs..and phoenix team didnt answer to me  

i want to restart my rig when rig freezer..how can i do this?what i must write my my file?

Can you please provide proof that you actually have hair. I want to make sure this offer is legit.

Someone has problems with the hashrate drops on amd cards? My 2 rigs have the same problem, by random some cards is reset to 25-26mhs and after 10-30 seconds it returns to 30-32mh as it should be . On Claymore there is no such problem.

As for your question about damaging the PSU, probably not.  The wattage rating on a PSU is what the unit is expected to OUTPUT... in your case, 1000W.  However, it is not perfectly efficient, so draw from the wall will be higher.  If your PSU is gold rated (80% efficient), then at maximum capacity, it should be pulling about 1200W at the wall.  This isn't a good thing to do in practice, since it generates a lot of heat and leaves no headroom for the system to get any more power (which would cause instability / crashes), and efficiency decreases at higher loads which means more $$ for power.  But if you only ran like that for a few minutes, then you don't need to worry about damage.  1000W PSU is pretty borderline for 6 580's, but if it's working for you then great.

As I said before, try the 18.3.4 drivers (and make sure you enable compute mode in settings) and run PheonixMiner again with your voltage tweaks.  

This problem come when you update windows to 1803 or install null.
What the error gives ati flasher?