Μπορείς να το ποστάρεις εδώ για να ξέρουν και οι υπόλοιποι του φόρα πως γίνεται ο υπολογισμός;

Εγώ χρησιμοποιώ το cryptocompare για υπολογισμούς στο ethereum mining. Δεν έχω δοκιμάσει του bitcoin γιατί είχα την εντύπωση οτι δεν συμφέρει..
Υπάρχει κάτι άλλο που πρέπει να προσέξουμε;

Ποιες Vega κάρτες είναι ακριβώς;

Link, φώτο;

Είσαι Αθήνα;

Nice video..i think i saw it on youtube before when i was looking how to setup my rig..

I have a question though. Has anyone put all 13 AMD cards on this board? Will it run on 13 AMD cards cause asrock's guide has a mix of 7 AMD and 5 Nvidia.

I have 8 AMD cards hooked up on it and im waiting on a cable to plug 2 more. I recently bought another 2 RX580's though for a 2nd rig im planning but i thought in the meanwhile if i could put them all together.
But i want to ask first if anyone else has done it..

thanks

Is it true that ethOS gives you an extra 1-2mhs per card for ethereum?
How does it work with this board? Anyone tried that setup yet?

Έχουμε βρει την καραμέλα..

Πήρα κάρτες rx580 με 300 ή και λιγότερα..τις έλιωσα 6 μήνες στο mining και τώρα τις βάζω αγγελία προς 500+ έκαστη γιατί τόσο κάνει και στο σκρουτζ.

Αμα δε θέλεις πάρε απ το σκρουτζ σου λέει..

χαχα ελευθερη αγορά κι έτσι ))))

Κι εσυ πουλάς μεταχειρισμένες κάρτες σε τιμές καινουργιας δλδ;

Μια χαρά..αμα βρίσκεις κορόιδα γιατί οχι

Τρέχω παρόμοιο setup με 8 κάρτες εδώ και περίπου ένα μήνα.

Καταρχάς θέλω να σε ρωτήσω τι rating έχουν τα τροφοδοτικά σου;
Επίσης έχεις πολυ ψηλές θερμοκρασίες. Στο δικό μου δεν ξεπερνάνε τους 55c με τα fans να γυρνάνε στο 65%

Από την εμπειρία μου τα riser πρέπει να παίρνουν ρεύμα μαζί με την GPU το καθένα ανάλογα σε ποιο τροφοδοτικό έχεις συνδέσει την κάρτα. (GPU+riser μαζί δλδ)
Σημαντικό να έχεις μέχρι 2 riser σε κάθε καλώδιο.
Εγώ έχω 2 corsair 850w και σηκώνει το καθένα 4 κάρτες. Με το ένα να σηκώνει μαζί και όλο το υπολοιπο σύστημα. (mobo-cpu-ram-m.2)
Δοκίμασε να σετάρεις με μία κάρτα είτε παίρνωντας σήμα απ την onboard χρησιμοποιώντας τους 17.11.4 drivers και αφού το σετάρεις πρόσθεσε μετά τις υπόλοιπες.

Με το msi afterburner μπορείς να ρυθμίσεις τα core & mem clocks και να κατεβάσεις τα watt λίγο.

Δεν βλέπω το λόγο να αγοράσει κάποιος απο σένα την στιγμή που οι τιμές στο skroutz αλλά και σε άλλα ελληνικά καταστήματα είναι +10-20 ευρώ.

Πάνε όλοι για αρπαχτές μου φαίνεται..

With the latest updates there is no limitation in number of cards Windows supports. When you assemble your rig start with just ONE card. Install the drivers from scratch and then add the rest of your cards.
I used the 17.11.4 drivers version. Not sure if the same will work for you.

Μήπως πουλάς μόνο κάρτες;

I have this mobo running 8 cards.

It is true its a pain to setup and logic doesn't apply when configuring it to work with more than 7-8 cards.

What worked for me was using the blockchain drivers. Not the latest ones though. Or 17.11.4 AMD Drivers which will let you use MSI afterburner to change mem and core speed.

Also if you have connected 7-8-9 or 10 cards but it doesn't show some of them try changing the pciE slots. I plugged them in order from 1st to 8th skipping the main pciE.

Im about to connect 2 more cards at some point for a total of 10 but for now i can't tell which slots and in what order the mobo will detect. One thing sure is that you need to use DDU each time you change the drivers.

Also for me the latest version of drivers didn't work because although all cards where detected i COULDN'T use MSI afterburner to change clocks so i only got speeds up to 22-24 in claymores ETH miner.

I have read somewhere that you need a combination of cards for the mobo to run all 13 slots. Ie you need both AMD and Nvidia im not sure if it matters which you need more or if you need mining specific cards as well.

If anyone's got any questions or has any other info feel free to post. I ll keep this thread updated!

Αν μένεις στη Γεωργία ίσως θα ήταν καλύτερο να στήσεις την εταιρεία σου εκεί με "ελληνικό" κεφάλαιο αν μπορεις να βρεις.

Θα σου κοστίσει πολύ πιο φτηνά σε όλα. Και δεν ξέρω για την γραφειοκρατία εκεί (παλιά εκει με λίγο λάδωμα τα έκανες όλα) αλλά θα γλιτώσεις κι απο αυτό εκεί..

Είδα πρόσφατα ένα βίντεο στο youtube με έναν τύπο Γεωργιανό που μίλαγε άπταιστα αγγλικά να δείχνει την φάρμα που έχουν στήσει..

You can buy OEM windows keys from websites directly. No need for ebay. And they will even give you a second key if the one you bought doesn't work. I ve done this to both my main PC and my mining rig.

Google it and you ll find the site that sells these. Im not posting in case its not allowed or something. but if its ok ask the mods and i will share.

Update.

I re-built my setup from scratch. Re-installed windows on a new ssd .
Here is what works for me:

The Asrock mobo doesn't give me picture on my screen even when i clean installed everything and had my screen connected to a graphics card. Im using XFX RX580's.
In bios the default graphics is PCIE2 but if i have a card connected on it either directly or via riser it just gives me black screen and i cant even access bios.
So i used the onboard graphics to setup windows. Once i had windows i shut down and put ONE card on the main PCIE which is PCIE2.
Then at the first boot with ONE AMD card i installed the drivers Bakhtra kept mentioning 17.11.4.
Then i restart and switch the Global setting function to compute in the AMD settings. Shut down again.
After installing the first card i went ahead and connected 7 more cards. I did then ALL at once. Then i switched the setting for each card.
One thing i noticed with the 17.11.14 drives was that i could not get MSI afterburner to work. I could not change clock or mem Hz at all. Claymore gave me about 26Mh/s

So then i used DDU and after switching back to onboard graphics i installed the latest AMD blockchain drivers. This time after the restart all the cards were shown. One small detail. I have a card connected to the main PCIE but no card connected to the slot right before it. Havent tweaked anything in the bios either.
Windows now sees 8 cards and with the latest drivers i can use Afterburner and get some extra juice off of my cards.

Running Claymore at the moment at 29.9 - 30Mh's

Quick note: I had to up windows virtual memory cause claymore gave me a DAG error. After adding more virtual memory everything works as a charm!

Now waiting for the triple PSU cable to connect the other 2 cards remaining and have a 10x RX580's setup.

I ll try to help as much as i can if anyone else getting crap from that board..

Also it wont recognize Intel M.2 SSD's..

My mobo wont let me boot into bios with an AMD card. Nvidia card works but my RX580 doesn't. I tried both stock and modified bios.

I have to switch to onboard graphics. Install windows and then do the rest. Install drivers and then i get image from a card but NOT if it is plugged in the main PCIe.
Asrock is seriously crap so far!

Could someone else using this mobo post a picture of what your bios look like when running on 10 or more cards?

Bahktra

I was having the same issue with the motherboard seeing only 7 slots in bios and 7 cards in windows BEFORE i even installed ANY drivers. Firstly i installed the wrong drivers but then used DDU and after restart it still only showed SEVEN cards.
Now i managed to pinpoint another problem. When i have a card connected to the main pciE slot i get a black screen. Switching to the onboard graphics gives no image either and i CANNOT access bios.
I think the board is faulty. Going to return it today.

Will see what they tell me at the shop.

The problem is not in the drivers. Even before i installed the AMD blockchain drivers my system in Windows only detected 6x GPU's.

I went and changed the bios setting in the PCI configuration section from Auto to Gen1 for all 7x ports that show up and managed to get 7 out of 8 cards that i have connected now.

Again. My mining speed is very good 30Mh/s. The problem is that windows or motherboard or bios i dont know, wont show all of my cards.

I used the patcher too so no worries about that either.


Anyone else experiencing issues with this mobo?

Hello

Yes i am using the latest windows version. Updated and everything. Version 1709.
The drivers i am using are 17.30.1029 and there isn't anywhere that i can change the settings to compute as i have read elsewhere.

I have flashed all of my 6x cards that windows detected using AtiFlash and a modded bios version specifically for my card.
Windows wasn't detecting the 7th card with stock bios either.

https://i.imgur.com/QaeIxsq.jpg

this is what i see in the bios when i log in. btw i can only log in to bios when my screen is connected to the onboard graphics.

About the noob question above. No the mobo DOES NOT come with a heatsink for your cpu. You get the stock heatsink packaged with the cpu unless you buy a tray version.

My setup is :
Started building my first mining rig. I have read both this forum and reddit as well as random info all over the internet.

Decided to go with the 13 gpu Asrock mobo and because of availability issues i got 3x psu's instead of 2x more powerfull.
Anyways building and connecting everything wasn't that hard. You need to follow the basic instructions that come with the mobo. I also watched this guy's video on youtube when assembling my rig : https://www.youtube.com/watch?v=B6gB7GYkkiA

Points to watch out for. You have to connect the 2x extra molex connectors on the mobo, to the same PSU that gives power to the mobo+cpu.

Other than that everything else as in the video but here's where MY problem starts

Setup is:

Asrock H110 Pro btc+
8g Ram (2x 4g dimms)
Pentium 4560
10x XFX R580's
3x 850w PSU (platinum)

For now i have only connected 7 cards using 2 psu's. Im waiting for a cable to connect all 10 cards and the 3rd psu.

I setup windows and installed the wrong drivers first. So had to use DDU and reinstall the AMD crimson pack. Now gpu-z and windows device manager sees 6 cards.
I did a bios update but that didnt change anything.
Also when i have my display connected to one of the 580's i CANNOT access bios setting.
If i disconnect all cards and use onboard graphics i can access bios but i get oenly 7 pciE showing in bios.

what gives?

btw using 6x cards with modded bios and AMD mining drivers gives me 30Mh/s on claymore mining Ethereum but i have 10x cards and i need to use them all.

thanks for any help..much appreciated!