Search content
Sort by
Showing 20 of 143 results by Mister305
Re: [ANN][PRE-ICO]HoweyCoins: the only BitcoinTalk-endorsed ICO - GUARANTEED PROFIT
Thank you for shining the light on trash ICOs that water down the community with scams and trash ideas that dont go into fruition all in the hopes of destroying Bitcoin and crypto currencies.
Re: [ANN][MAP] Maple Coin, PoW, CryptoNight CPU/GPU Mining, Anonymity Cryptocurrency
May I know pls how much tokens were sold at the pre-ICO? - If that's allowed to disclose.
From what I gather , this is not an ICO.
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
Hi,
I'am facing a problem and don't know how to approach it correctly.
I'am running simplemining with 6 x XFX RX470 8GB Hynix, there are two thing happening:
1. After about 10 minutes of mining, hashrate of GPU3 goes down from 28mh/s to about 22.. 20mh/s and stays there, after some time eventually it will crash with
the following message in dmesg:
[ 1084.587016] amdgpu 0000:07:00.0: GPU fault detected: 147 0x05708801
[ 1084.587016] amdgpu 0000:07:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00E0983C
[ 1084.587016] amdgpu 0000:07:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x06088002
Lots of those messages.
2. Sometimes all GPU's hashrate drops to about 10mh/s and the CPU usage goes to 100% ( claymore process ), again, the same error appears into dmesg (the gpu fault).
Now, I did shut off GPU3 and identify the card that cooled down, the problem is that the dmesg errors are for PCI ID 03 not for PCI ID 04 ( card that drops in hashrate ), here is my lspci:
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev cf)
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev cf)
02:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev cf)
03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev cf)
04:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
05:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev cf)
05:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
06:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev cf)
06:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
Now, I believe claymore see GPU in order, right ? I mean, GPU0 is 01:00, GPU2 is 02:00, etc... is this correct ?
Because the card that is dropping in hashrate is GPU3 but the error in dmesg are for PCI ID: 03:00, which should be for GPU2 in claymore ( GPU0, 1, 2-- 3rd card ).
So, what card is faulty
? The one that drops in hashrate or the one that id refereed by dmesg error ?
Has anyone else encountered this type of problem ?
Thanks!
I'am facing a problem and don't know how to approach it correctly.
I'am running simplemining with 6 x XFX RX470 8GB Hynix, there are two thing happening:
1. After about 10 minutes of mining, hashrate of GPU3 goes down from 28mh/s to about 22.. 20mh/s and stays there, after some time eventually it will crash with
the following message in dmesg:
[ 1084.587016] amdgpu 0000:07:00.0: GPU fault detected: 147 0x05708801
[ 1084.587016] amdgpu 0000:07:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00E0983C
[ 1084.587016] amdgpu 0000:07:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x06088002
Lots of those messages.
2. Sometimes all GPU's hashrate drops to about 10mh/s and the CPU usage goes to 100% ( claymore process ), again, the same error appears into dmesg (the gpu fault).
Now, I did shut off GPU3 and identify the card that cooled down, the problem is that the dmesg errors are for PCI ID 03 not for PCI ID 04 ( card that drops in hashrate ), here is my lspci:
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev cf)
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev cf)
02:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev cf)
03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev cf)
04:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
05:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev cf)
05:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
06:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev cf)
06:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
Now, I believe claymore see GPU in order, right ? I mean, GPU0 is 01:00, GPU2 is 02:00, etc... is this correct ?
Because the card that is dropping in hashrate is GPU3 but the error in dmesg are for PCI ID: 03:00, which should be for GPU2 in claymore ( GPU0, 1, 2-- 3rd card ).
So, what card is faulty
? The one that drops in hashrate or the one that id refereed by dmesg error ?Has anyone else encountered this type of problem ?
Thanks!
I had this issue and had to lower my core and mem a little till it stopped.
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
Someone post a working command line to mine neoscrypt with rx 580s
I will tip the person, I am tired of trying to get it to hash right.
Done
I will tip the person, I am tired of trying to get it to hash right.
Done
you can use the recently added Gateless Gate miner.
AMD cards are very poor in Neoscrypt - you get better results with NVIDIA.
Anyways you can try this below - worked for my 470/480, no need tip
--kernel neoscrypt -o stratum+tcp://neoscrypt.hk.nicehash.com:3341 -u .$rigName -p x -T
TY that line with the -T makes my system crash.
-T I think is for text mode
you can omit this if you want but smos may not be able to format the console properly
if your miner is still crashing then most likely its your OC settings
reset them to stock by putting "0" / "zero" in me core and mem field and 800 or 900 undervoltage
I am getting 127 h/s total for 6 rx 580. I see I should be around 400-500 h/s each. Not 127h/s total. Any other settings to check? Recommendation anyone ?