Search content
Sort by
Showing 7 of 7 results by NexusPrime
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
For Eth-only, -dcri does nothing unless you are using -asm. From Claymore:
-dcri Decred/Siacoin/Lbry/Pascal intensity, or Ethereum fine-tuning value in ETH-only ASM mode. Default value is 30, you can adjust this value to get the best Decred/Siacoin/Lbry mining speed without reducing Ethereum mining speed.
You can also specify values for every card, for example "-dcri 30,100,50".
You can change the intensity in runtime with "+" and "-" keys and check current statistics with "s" key.
For example, by default (-dcri 30) 390 card shows 29MH/s for Ethereum and 440MH/s for Decred. Setting -dcri 70 causes 24MH/s for Ethereum and 850MH/s for Decred.
-asm (AMD cards only) enables assembler GPU kernels. In this mode some tuning is required even in ETH-only mode, use "-dcri" option or or "+/-" keys in runtime to set best speed.
Currently ETH-LBRY mode is not supported in assembler.
Specify "-asm 0" to disable this option. You can also specify values for every card, for example "-asm 0,1,0". Default value is "1".
If ASM mode is enabled, miner must show "GPU #x: algorithm ASM" at startup.
Check "FINE-TUNING" section below for additional notes.
NEW: added alternative assembler kernels for Tonga and Polaris cards for ETH-only mode. Use them if you get best speed at "-dcri 1" (i.e. you cannot find speed peak), use "-asm 2" option to enable this mode.
Feel free to experiment. Results will vary.
aha but im not dual minning when i use this dcri 5 it incresses the hashrate but should i remove it or use another number instead
-dcri Decred/Siacoin/Lbry/Pascal intensity, or Ethereum fine-tuning value in ETH-only ASM mode. Default value is 30, you can adjust this value to get the best Decred/Siacoin/Lbry mining speed without reducing Ethereum mining speed.
You can also specify values for every card, for example "-dcri 30,100,50".
You can change the intensity in runtime with "+" and "-" keys and check current statistics with "s" key.
For example, by default (-dcri 30) 390 card shows 29MH/s for Ethereum and 440MH/s for Decred. Setting -dcri 70 causes 24MH/s for Ethereum and 850MH/s for Decred.
-asm (AMD cards only) enables assembler GPU kernels. In this mode some tuning is required even in ETH-only mode, use "-dcri" option or or "+/-" keys in runtime to set best speed.
Currently ETH-LBRY mode is not supported in assembler.
Specify "-asm 0" to disable this option. You can also specify values for every card, for example "-asm 0,1,0". Default value is "1".
If ASM mode is enabled, miner must show "GPU #x: algorithm ASM" at startup.
Check "FINE-TUNING" section below for additional notes.
NEW: added alternative assembler kernels for Tonga and Polaris cards for ETH-only mode. Use them if you get best speed at "-dcri 1" (i.e. you cannot find speed peak), use "-asm 2" option to enable this mode.
Feel free to experiment. Results will vary.
You parameter [-dcri 5] is for dual mining. A ~1mh per GPU difference from windows to Linux is normal. Your hashrate is fine.
its same mate 180hash just when i started on simplemine it droped to 178hash
btw im minning only Ethereum Classic ETC atm no dual nothing
29.66mhs (ETH) per RX470 when dual mining is as good as it gets. What's your hash on eth only?
any expert can help me out with this please
hey guys im using this amazing simpleminning but im trying to get most of my rig so needed an advice for overclocing for fulll hashrate
i own 6 Saphire RX 470 8gb hynix memory
i managed to get it 178hash but is there possibility for more without any issue ofc.
my settings are
core mhz: 1150
mem mhz: 2150
Core Unvervolting: 900
powerstage 6
-epsw x -tstop 75 -dcri 5
i own 6 Saphire RX 470 8gb hynix memory
i managed to get it 178hash but is there possibility for more without any issue ofc.
my settings are
core mhz: 1150
mem mhz: 2150
Core Unvervolting: 900
powerstage 6
-epsw x -tstop 75 -dcri 5
any expert can help me out with this please
its same mate 180hash just when i started on simplemine it droped to 178hash
btw im minning only Ethereum Classic ETC atm no dual nothing
aha but im not dual minning when i use this dcri 5 it incresses the hashrate but should i remove it or use another number instead
aha i understand but what do you suggest me to set for my rig configurations
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
You parameter [-dcri 5] is for dual mining. A ~1mh per GPU difference from windows to Linux is normal. Your hashrate is fine.
its same mate 180hash just when i started on simplemine it droped to 178hash
btw im minning only Ethereum Classic ETC atm no dual nothing
29.66mhs (ETH) per RX470 when dual mining is as good as it gets. What's your hash on eth only?
any expert can help me out with this please
hey guys im using this amazing simpleminning but im trying to get most of my rig so needed an advice for overclocing for fulll hashrate
i own 6 Saphire RX 470 8gb hynix memory
i managed to get it 178hash but is there possibility for more without any issue ofc.
my settings are
core mhz: 1150
mem mhz: 2150
Core Unvervolting: 900
powerstage 6
-epsw x -tstop 75 -dcri 5
i own 6 Saphire RX 470 8gb hynix memory
i managed to get it 178hash but is there possibility for more without any issue ofc.
my settings are
core mhz: 1150
mem mhz: 2150
Core Unvervolting: 900
powerstage 6
-epsw x -tstop 75 -dcri 5
any expert can help me out with this please
its same mate 180hash just when i started on simplemine it droped to 178hash
btw im minning only Ethereum Classic ETC atm no dual nothing
aha but im not dual minning when i use this dcri 5 it incresses the hashrate but should i remove it or use another number instead
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
29.66mhs (ETH) per RX470 when dual mining is as good as it gets. What's your hash on eth only?
any expert can help me out with this please
hey guys im using this amazing simpleminning but im trying to get most of my rig so needed an advice for overclocing for fulll hashrate
i own 6 Saphire RX 470 8gb hynix memory
i managed to get it 178hash but is there possibility for more without any issue ofc.
my settings are
core mhz: 1150
mem mhz: 2150
Core Unvervolting: 900
powerstage 6
-epsw x -tstop 75 -dcri 5
i own 6 Saphire RX 470 8gb hynix memory
i managed to get it 178hash but is there possibility for more without any issue ofc.
my settings are
core mhz: 1150
mem mhz: 2150
Core Unvervolting: 900
powerstage 6
-epsw x -tstop 75 -dcri 5
any expert can help me out with this please
its same mate 180hash just when i started on simplemine it droped to 178hash
btw im minning only Ethereum Classic ETC atm no dual nothing
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
hey guys im using this amazing simpleminning but im trying to get most of my rig so needed an advice for overclocing for fulll hashrate
i own 6 Saphire RX 470 8gb hynix memory
i managed to get it 178hash but is there possibility for more without any issue ofc.
my settings are
core mhz: 1150
mem mhz: 2150
Core Unvervolting: 900
powerstage 6
-epsw x -tstop 75 -dcri 5
i own 6 Saphire RX 470 8gb hynix memory
i managed to get it 178hash but is there possibility for more without any issue ofc.
my settings are
core mhz: 1150
mem mhz: 2150
Core Unvervolting: 900
powerstage 6
-epsw x -tstop 75 -dcri 5
any expert can help me out with this please
Re: [Mining OS] SimpleMining.net - Easy to use GPU MINING Operating System
hey guys im using this amazing simpleminning but im trying to get most of my rig so needed an advice for overclocing for fulll hashrate
i own 6 Saphire RX 470 8gb hynix memory
i managed to get it 178hash but is there possibility for more without any issue ofc.
my settings are
core mhz: 1150
mem mhz: 2150
Core Unvervolting: 900
powerstage 6
-epsw x -tstop 75 -dcri 5
i own 6 Saphire RX 470 8gb hynix memory
i managed to get it 178hash but is there possibility for more without any issue ofc.
my settings are
core mhz: 1150
mem mhz: 2150
Core Unvervolting: 900
powerstage 6
-epsw x -tstop 75 -dcri 5
Re: [GUIDE][TUTORIAL][XMR,ETH]How To Mod Bios RX470/570/480/580 VEGA 56/64 Mining 💰
Greetings guys i really need help from miner experts i put all my investment on this only pc but having issues like drop hashrate also sometimes restarts.
i own a SAPPHIRE RX 470 8GB MINING EDITION WITH HYNIX i used this tutorial to get it to 30hz http://1stminingrig.com/best-bios-rom-for-sapphire-rx-470-8gb-mining-edition-with-hynix-memory-30-mhs/
but i managed to get it 180-181 hashrate but after few mins or hours hashrate drops to 160 or lower is there anyone can tell me what should i do or how to fix this issue also sometimes it restarts randomly no idea why
here is my email if anyone is willing to help me out denisjanuzi@gmail.com
i own a SAPPHIRE RX 470 8GB MINING EDITION WITH HYNIX i used this tutorial to get it to 30hz http://1stminingrig.com/best-bios-rom-for-sapphire-rx-470-8gb-mining-edition-with-hynix-memory-30-mhs/
but i managed to get it 180-181 hashrate but after few mins or hours hashrate drops to 160 or lower is there anyone can tell me what should i do or how to fix this issue also sometimes it restarts randomly no idea why
here is my email if anyone is willing to help me out denisjanuzi@gmail.com
There can be multiple reasons. what are temperatures on the card. Check for memory errors using HWInfo64. Hashrate drops for 1 particular card or the drop is spread across multiple cards?
yep it was 1 card had to many errors i replaced it also lowered abit mem and so far so good 180 hashrate without drop works like charm memclock was 2150 but had to lower since crashed my drivers now with 2140 works like charm... 470 8GB Hynix best thing ever !!
Re: [GUIDE][TUTORIAL][XMR,ETH]How To Mod Bios RX470/570/480/580 VEGA 56/64 Mining 💰
Greetings guys i really need help from miner experts i put all my investment on this only pc but having issues like drop hashrate also sometimes restarts.
i own a SAPPHIRE RX 470 8GB MINING EDITION WITH HYNIX i used this tutorial to get it to 30hz http://1stminingrig.com/best-bios-rom-for-sapphire-rx-470-8gb-mining-edition-with-hynix-memory-30-mhs/
but i managed to get it 180-181 hashrate but after few mins or hours hashrate drops to 160 or lower is there anyone can tell me what should i do or how to fix this issue also sometimes it restarts randomly no idea why
here is my email if anyone is willing to help me out denisjanuzi@gmail.com
i own a SAPPHIRE RX 470 8GB MINING EDITION WITH HYNIX i used this tutorial to get it to 30hz http://1stminingrig.com/best-bios-rom-for-sapphire-rx-470-8gb-mining-edition-with-hynix-memory-30-mhs/
but i managed to get it 180-181 hashrate but after few mins or hours hashrate drops to 160 or lower is there anyone can tell me what should i do or how to fix this issue also sometimes it restarts randomly no idea why
here is my email if anyone is willing to help me out denisjanuzi@gmail.com