Hello,

 i thought there was no changes in V 0.28.2 to 0.28.3 (in my case now specially for R9 290 cards) and just algo RVN i tired

on three Rigs i had no issues and memory errors with V 28.2, then switched to V 28.3 - on all Rigs no chance to get them work for more then 3 min!

Memory Errors , cards hangs, really bad hangings on all cards of a rig -tried lower all down - same!!

Switched back to V 28.2 and old ( higher tuning) all ok!

So on one side no problem, but.....?

AH ok, i will try

THX

OK, it was one Riser, it is always a riser in the end!!!

this config working now fine!

And another Question:

what do you take to remote monitor the miner?

eg: for Claymore and PM you can take Claymore RemoteManager.

maybe one good android app?

THX

Hello,

Cause now its cold outside and RVN makes some coins, i took out some of my old heater: R9 290 Sapphire Vapor

tested them all for days extra on Win 10 20H2 and AMD 20 with some higher power usage on WildRig 0.28.2--- all rock stabil!

now in Rig 6 of the best , newer AMD Driver 20.12.1 so that i can use also PM and SRB miner if necessary (and two HP Server 1200w PSUs)


---AFTER 1Hour: opencl driver ERROR and GPU 1-6 hangs

many times tried, next new windows installed :--exact the same again!

any ideas?

THX

Hello, i am sure this question was asked a lot of times - but i never needed it

i was just running PM miner since it exists with not much overtuned cards and it always worked without issues!

now i wantes to run it as an admin ,- in windows i am logged in as an admin, -but to run the bat file as an admin - after starting it says this is not an internal command?

what do i make wrong?

THX

you have to update PM to 5.2 c

its the driver

use 20.4.2 (and updated intel driver!- if you have) -all will work like a charme!

( i use since some days also win 10 20h2, working perfect)

THX for the good thoughts!

BUT IN THE END THIS DOES NOT SOLVE MY PROBLEM!

hello,

since some time i  am mining some XHV, made the windows wallet from XHV website.

first time now i wanted move some XHV, i wanted to copie address and payment ID, but this is disabled, i only can write it in!?? _ normal? -- to write about 200 letters and numbers each time i want to transfer? - sure i will never write right!

did i make something wrong?- maybe a good alternative for android?


THX

 !

OK- reall nice from tis community!!!

I am mining Pirl for a long time - i never sold Pirl!! - this means i am active supporting this project in a way, i can do! -
and when i have one time a question- maybe a stupid one - i do not get any answer!

THANKS  A LOT!

hello doctor8,

i am using your old miner cause i have older cards -amd 290s- with haven and working really perfect.

I wanted to disable some cards - say 2 and 3 -but not in console miner running- in bat file,


i added --cgpuid 0,1,4,5 but then miner asks for cgpuintensity. so i have to no for amd 290s intensity -or miner can check this automatically? do you now which intensity to start trying?

sorry for this question- sure it was asked 1000 times- but i could not find any answer.

THX

Hello,

need some help, i am little bit mining and holding pirl for  a longer time now, and wanted just to " make" my first masternode.....

i always checked my pril in blockchain explorer - now i opened my coinomy wallet - what the f..k, pirl not supported anymore,

- I am an engineer, not an edv master, i think i got my private keys for pirl "out of coinomi" wallet with "mnemonic code converter" now.

but i cannot find a pirl wallet to import the private key to get my pirl, - i always just can make a new wallet with new address!

also i cannot install pirlapp2.0 on my windows 10 ( i have intel cpu??)...? - program starts, pops uo and ciao...

THX

Hi,




"example on a 5 card machine -di 0145
I was disabling the 2nd GPU in claymore"

but this is 6 card machine!?! - 0 1 2 3 4 5

5 card machine, PH miner, disable second, write  -gpus 1345

Hello, just changend my rigs to this miner, awesome! -completly happy!!

on some rigs i have to disable one gpu, they are for some algos not ok, they are old...

but i cannot find out how to disable one, for example : i want disable my second gpu - what command i have to use in bat?

THX

you never can mine with an ASIC something else for what ALGO it was built!!!!!

Antminer S9 was built to mine algo sha-256 !!! (like btc, bsv, bch, ppc, lcc, ......)

Hello, wanted to give a try to mine QKC but i have some problems with the address.


PhoenixMiner working well for me for a long time and this is not my problem.

i took from binance a QKC address, write in miner, mining on qkc.ontopool.com. all was working without issues for hours.

So now the problem: qkc address from binance - and never had issues when i took for testing one address from them - looks like "xyz"


BUT ontopool "makes" from it "xyz000000" - all other mining adresses there also look like this! - so i have coins on "xyz00000" but cannot take them, ok its maybe 2$, so not worth


but what i make wrong?


THX

Hello, would need some help mining Quarkchain QKC

PhoenixMiner working well for me for a long time and this is not my problem.

i took from binance a QKC address, write in miner, mining on qkc.ontopool.com. all was working without issues for hours.

So now the problem: qkc address from binance - and never had issues when i took for testing one address from them - looks like "xyz" 


BUT ontopool "makes" from it "xyz000000" - all other mining adresses there also look like this! - so i have coins on "xyz00000" but cannot take them, ok its maybe 2$, so not worth


but what i make wrong?


THX

and i am completly new to linux - have MS infrastucture

so in my local network what would be the best remote software for hiveos access from windows desktop?

THX