Search content
Sort by
Showing 7 of 7 results by PuiuCS
Works amazing! thanks
STOP The thanks! You are making the thread going fast, unusable for support question and impossible to follow, even claympre wont be able to follow it. Just use it for problems, advises and suggestions!
Re: Claymore's Dual Ethereum+Decred/Siacoin GPU Miner v5.1 (Windows/Linux)
Anyone have received payment from nanpool on last 12 hours ?
yes, payments are working just fine.Re: Claymore's Dual Ethereum+Decred GPU Miner v4.7 (Windows/Linux)
Hello Claymore,
What could be the reason why effective and average hashrate is so much less than my reported hashrate?? The rig have been running at the same hashrate well over 48hrs so the data should be close for all. Please see screenshot.
maybe you are getting too many rejected shares. and maybe the pool you are using is having bad luck in those days. the effective hashrate does vary a lot from day to day.What could be the reason why effective and average hashrate is so much less than my reported hashrate?? The rig have been running at the same hashrate well over 48hrs so the data should be close for all. Please see screenshot.
Re: Claymore's Dual Ethereum+Decred GPU Miner v4.6 (Windows/Linux)
Hello,
I just built my first mining PC and i wanted to know if my results are good.
i have 4x 380x 1020/1475 default Mhz
EthDcrMiner64.exe -etha 0 -ethi 16,8,16,16 -mode 1 -esm 0 -mclock 1500,1475,1500,1500 -epool eu1.nanopool.org:9999 -ewal 0x -epsw x -eworker ethrig1
Total Speed: 84.508 Mh/s
GPU0 21.085 Mh/s, GPU1 21.109 Mh/s, GPU2 21.132 Mh/s, GPU3 21.183 Mh/s
GPU0 t=70C fan=72%, GPU1 t=74C fan=81%, GPU2 t=71C fan=74%, GPU3 t=65C fan=60%
Is this what other people are getting? Or can it be improved without OCing?
Hashrate is quite goodI just built my first mining PC and i wanted to know if my results are good.
i have 4x 380x 1020/1475 default Mhz
EthDcrMiner64.exe -etha 0 -ethi 16,8,16,16 -mode 1 -esm 0 -mclock 1500,1475,1500,1500 -epool eu1.nanopool.org:9999 -ewal 0x -epsw x -eworker ethrig1
Total Speed: 84.508 Mh/s
GPU0 21.085 Mh/s, GPU1 21.109 Mh/s, GPU2 21.132 Mh/s, GPU3 21.183 Mh/s
GPU0 t=70C fan=72%, GPU1 t=74C fan=81%, GPU2 t=71C fan=74%, GPU3 t=65C fan=60%
Is this what other people are getting? Or can it be improved without OCing?
I have about 3x20.1 on my rig on 380x (default clocks)
Is it working stable?
Re: Claymore's Dual Ethereum+Decred GPU Miner v4.6 (Windows/Linux)
TROUBLESHOOTING
1. Install Catalyst v15.12.
2. Disable overclocking.
3. Set environment variables as described above.
4. Set Virtual Memory 16 GB.
5. Reboot computer.
6. Check hardware.
7. Set some timeout in .bat file before starting miner at system startup (30sec or even a minute), and try "-ethi 4" to check if it is more stable. It can help if miner is not stable on some system.
just want to ask.. why you not allowing to overclock GPU ?
i get error, stopping after 2nd round, restarting claymore
That's just for troubleshooting in case you have problems. You can OC to your heart's content. 1. Install Catalyst v15.12.
2. Disable overclocking.
3. Set environment variables as described above.
4. Set Virtual Memory 16 GB.
5. Reboot computer.
6. Check hardware.
7. Set some timeout in .bat file before starting miner at system startup (30sec or even a minute), and try "-ethi 4" to check if it is more stable. It can help if miner is not stable on some system.
just want to ask.. why you not allowing to overclock GPU ?
i get error, stopping after 2nd round, restarting claymore
Re: Claymore's Dual Ethereum+Decred GPU Miner v4.6 (Windows/Linux)
Hello,
I just built my first mining PC and i wanted to know if my results are good.
i have 4x 380x 1020/1475 default Mhz
EthDcrMiner64.exe -etha 0 -ethi 16,8,16,16 -mode 1 -esm 0 -mclock 1500,1475,1500,1500 -epool eu1.nanopool.org:9999 -ewal 0x -epsw x -eworker ethrig1
Total Speed: 84.508 Mh/s
GPU0 21.085 Mh/s, GPU1 21.109 Mh/s, GPU2 21.132 Mh/s, GPU3 21.183 Mh/s
GPU0 t=70C fan=72%, GPU1 t=74C fan=81%, GPU2 t=71C fan=74%, GPU3 t=65C fan=60%
Is this what other people are getting? Or can it be improved without OCing?
I just built my first mining PC and i wanted to know if my results are good.
i have 4x 380x 1020/1475 default Mhz
EthDcrMiner64.exe -etha 0 -ethi 16,8,16,16 -mode 1 -esm 0 -mclock 1500,1475,1500,1500 -epool eu1.nanopool.org:9999 -ewal 0x -epsw x -eworker ethrig1
Total Speed: 84.508 Mh/s
GPU0 21.085 Mh/s, GPU1 21.109 Mh/s, GPU2 21.132 Mh/s, GPU3 21.183 Mh/s
GPU0 t=70C fan=72%, GPU1 t=74C fan=81%, GPU2 t=71C fan=74%, GPU3 t=65C fan=60%
Is this what other people are getting? Or can it be improved without OCing?