Hello JPMHIN,

Thank you very much for your share.

Have you tried running HWiNFO to check for memory errors?

I have the same GPUs, tried once running my BIOS like yours, but it was really impossible due to memory errors.
Going to try again with your settings.

Thanks!

Hi,

From the hashrate I calculated for a 4GB, you should go for Expanse or Musicoin + DCR, Dual Mining.
You should get using Claymore 9.7, with modded BIOS, something like 13.5 MH/s EXP + 350 MH/s DCR.

Sia coin is not very profitable on RX560.

Good luck.

Hello,

In MSI Afterburner it doesn't work. I had changed it all over PolarisBiosEditor and checked the running values with HWiNFO64.

Hello everyone,

I have been watching the progress of your analysis on the RX 560 4GB and I would like to share my findings, since I have 2 units of Sapphire RX 560 Pulse 4GB myself.

My stats are as follows:

Miner: Claymore 9.7 Dual Mining - ETH + DCR
Current hash rate per card: 13.7 MH/s (ETH) + 365 MH/s (DCR)

I'm running for more than a month already both GPUs with the following settings (BIOS Modded):

- 1500 Strap to 1625, 1750 and 2000.
- MemClock increased from 1750 Mhz to 2017 Mhz (maximum safe without memory errors - validate with HWiNFO64)
- Increased Max Power Limit to 85
- GPU Core timings - all decreased and last one is 1120Mhz (minimum GPU Core) [Could be lower I think, but decreases dual mining]
- Max GPU Freq. = 1400 Mhz
- Max Memory Freq. = 2200 Mhz
- Decreased Max. Temp in FAN and PowerTune to 82ºC and decreased the overall FAN + Temps settings so it maintains the temperatures down.

- This is a very stable reesult, running for many days.

I have also pushed the memory clocks up, until 2150Mhz, but after 2025 Mhz it gets unstable and crashes the miner. I managed to reach 14.9 MH/s (ETH) + 400 MH/s (DCR) in Dual minig but totally unstable after a few minutes.

I hope it helps you guys getting a few more MH/s from your cards.


For any donation or something, please reach me by PM.
Thank you!