Search content
Sort by
Showing 6 of 6 results by Riko87
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
@miningpoolhub
Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.
Has the site been having problems on the Baikal ports? My Baikal has been shutting down randomly and has to be reset, OR it goes to a fail-over pool. It never did this before the recent server move.
Server pool is restarted rarely time to time. Maybe this can affect for 1~5 minutes.
Today I restarted the pool few hours ago.
Also I would like to recommend you to upgrade your firmware if you didn't do it yet.
@miningpoolhub
Does anyone know how to set the difficulty in monero? they said to set the worker password at d = 0.01 but it seems not to change anything ..
It would seem that the minimum difficulty is 40k could you lower? my cpu can not reach that value
Version 5 is much better in performance in fact now uses 99% of all 1080i video cards compared to version 4 that used 99% only from the first and 90% from the others .. but after about 30 minutes of operation freezes without any message .. I was forced to put back the version 4 .. to anyone else from the same problem under Windows 10?
Maybe you can check your overclocked setting or cable connections?
I have experienced same issues with ewbf before. I fixed it by replacing my USB raiser cables. Usually freezing on high utilization is a sign of bad overclocking or unstable cable (USB raiser or power) connections.
BTW, could anyone tell me should I switch from ewbf to bminer or not? I have been using ewbf for a while. Is bminer faster?
mm I do not think depends on that since the version 4 works without problems for several days
Version 5 is much better in performance in fact now uses 99% of all 1080i video cards compared to version 4 that used 99% only from the first and 90% from the others .. but after about 30 minutes of operation freezes without any message .. I was forced to put back the version 4 .. to anyone else from the same problem under Windows 10?
Windows 10 Pro Version 1703 x64
Intel Celeron CPU G3900 @2.80GHz
NVIDIA Driver: 23.21.13.8813
Intel Celeron CPU G3900 @2.80GHz
NVIDIA Driver: 23.21.13.8813
Confirm that with DSTM Miner i have max GPU load: http://ibb.co/ni7RBb
Hi, i now testing compare with dstm, and it seems this miner is a few percent faster like others said. But on some rigs i have problem, that some GPUs are not load at full.
example, rig with 3x1070 with dstm all GPUs are on 99-100%, but with Bminer, only GPU 0 and 2 are on this. GPU1 is only 94% load
On rig with 4x1070 GPU 0,1 and 3 at full load, but GPU2 again only 94%
Like i said, with dstm or ewbf are all gpus at full load, no other change.
p.s. on 1070ti... this is awesome, where i had 480 with dstm, with bminer i have 500sols, awesome. But again, on rig with 4x1070ti+2x1060 I have problem, that some gpus are not at full load and all rig is slower compare with dstm wgich is ok.
I have no idea where can be problem.
example, rig with 3x1070 with dstm all GPUs are on 99-100%, but with Bminer, only GPU 0 and 2 are on this. GPU1 is only 94% load
On rig with 4x1070 GPU 0,1 and 3 at full load, but GPU2 again only 94%
Like i said, with dstm or ewbf are all gpus at full load, no other change.
p.s. on 1070ti... this is awesome, where i had 480 with dstm, with bminer i have 500sols, awesome. But again, on rig with 4x1070ti+2x1060 I have problem, that some gpus are not at full load and all rig is slower compare with dstm wgich is ok.
I have no idea where can be problem.
My guess is that the temperature might be too high --- can you please share some screenshots of the UI and the results of nvidia-smi?
I dont think there is a problem with temperature, because other miner havent this problem with same settings, here si screen.
https://ibb.co/g20shG
https://ibb.co/jiGnGb
and rig with 3x1070ti + 1x1070 + 2x1060 3GB
DSTM http://ibb.co/gaTqmb
Bminer http://ibb.co/khbMsG
Same problem with 3 1080ti
First GPU says 99% Utilization, other only 90%
Screen: https://ibb.co/ntmipw