Search content
Sort by

Showing 5 of 5 results by Roby1
Post
Topic
Board Mining (Altcoins)
Re: [ANN] Bminer: a fast Equihash miner for CUDA GPUs (5.5.0)
by
Roby1
on 26/03/2018, 11:28:12 UTC
Hi

I have been using bminer on 2x 12 1070ti rigs with no issue.
I have setup another rig with 9x 1080tis. The miner constantly restarts every 30mins or so. The last line in the console is "killed".
Previously when I had a riser fail while running bminer,  it stated exactly which gpu/riser it could not get temperature from.

The restarts do not happen with other softwares.

I am using simple mining and mining on nicehash.

Can anybody assist with the above

Can't assist you on how to solve the problem, but can report I am having the same problem or similar problem to yours also on a nine card rig. I am also using smos.

Mine is a 9x 1070ti rig. It took me a while to realise I had a problem. I was not paying attention to the console.

Whats happening with mine is that the rig loads up as normal on smos with the slow start from Bminer, then when all GPUs are running at full speed, GPU 8 starts dropping off slowly, the sol rate eventually drops down to zero, the rig keeps running for a while and but then I start getting the restarts about every 30 minutes or so. When I revert back to Bminer v5.5.0 the problem goes away, the rig runs normally. I tried dialing back the overclock on GPU 8 to see if this was the problem but that didn't work either. So for now just working v5.5.0. on this rig.

Funny thing is I have another 9 card rig with identical setup to the first, same mobo same power supply etc. Except this is a mixed card rig, 6x 1070 and 3x 1070t1 but this rig runs normally on Bminer v6.0.0.

I have a third 6x 1070ti card rig and this runs problem free as well with v6.0.0.

Just go back to v5.5.0 is my fix for the moment anyhow.











Thanks for feedback. Are you mining nicehash by any chance?
The restarts have somehow reduced to 1 per day.

I have now noticed that my rig shows offline on the pool as well as on simplemining monitor console but strangely the system is still drawing +750watts off power during this state, as per my energy meter. Full draw on this rig is - +2150watts. This would mean that my system is in some kind on halt state? Is some watchdog initiating?



No I am mining direct on Suprnova. No restarts on all three rigs since the initial problem, seems to be stable these past few days. still running 2 rigs on v6 and 1 rig on v5.5
Post
Topic
Board Mining (Altcoins)
Re: [ANN] Bminer: a fast Equihash miner for CUDA GPUs (5.5.0)
by
Roby1
on 25/03/2018, 21:41:31 UTC
Hi

I have been using bminer on 2x 12 1070ti rigs with no issue.
I have setup another rig with 9x 1080tis. The miner constantly restarts every 30mins or so. The last line in the console is "killed".
Previously when I had a riser fail while running bminer,  it stated exactly which gpu/riser it could not get temperature from.

The restarts do not happen with other softwares.

I am using simple mining and mining on nicehash.

Can anybody assist with the above

Can't assist you on how to solve the problem, but can report I am having the same problem or similar problem to yours also on a nine card rig. I am also using smos.

Mine is a 9x 1070ti rig. It took me a while to realise I had a problem. I was not paying attention to the console.

Whats happening with mine is that the rig loads up as normal on smos with the slow start from Bminer, then when all GPUs are running at full speed, GPU 8 starts dropping off slowly, the sol rate eventually drops down to zero, the rig keeps running for a while and but then I start getting the restarts about every 30 minutes or so. When I revert back to Bminer v5.5.0 the problem goes away, the rig runs normally. I tried dialing back the overclock on GPU 8 to see if this was the problem but that didn't work either. So for now just working v5.5.0. on this rig.

Funny thing is I have another 9 card rig with identical setup to the first, same mobo same power supply etc. Except this is a mixed card rig, 6x 1070 and 3x 1070t1 but this rig runs normally on Bminer v6.0.0.

I have a third 6x 1070ti card rig and this runs problem free as well with v6.0.0.

Just go back to v5.5.0 is my fix for the moment anyhow.









Post
Topic
Board Announcements (Altcoins)
Re: [ANN][ZEL] Zelcash : INNOVATIVE-INTELLIGENT-INSPIRING Cryptocurrency - zkSNARKs
by
Roby1
on 03/02/2018, 12:32:47 UTC

DON'T TRUST SOMEONE WHO LIES---3. We did not ban you from Discord (you stated that you hoped our project was successful and for real and we thanked you and you left the Discord
                                        community after I stated that hopefully you'd come back and realize all of the hard work that we put into the project)--- Please do not lie. We have screenshots.

4. We mentioned the use of both the Equihash/Ethash as a cross-chain approach and how the masternodes (which Zencash doesn't have) would be used as the POS for the Ethash chain.

5. Additionally, we mentioned that in regards to Zencash and other cryptocurrencies, we will be fundraising and donating back to the community of which we will have a vote on as a community (this donations page will be live any day now).


If anyone would like screenshots and proof of our conversation, please PM me and I will be happy to oblige.

Thank you and have a great day,


Mount Weather






Mount Weather, I sent message with wishing good luck if you doing a real project, but I didn`t even see this message, because I was kicked from your discord channel. If you didn`t kick me, then some one else kicked me.

So you have 2 devs, one of them a founder stated at your site as a businessman/trader/miner and a manager. So he have time for everything. Which mean he have no time for real developing. In addition he spending a lot of time in discord. Just to prove my point he is not developing atm and probably in the future. 

To everything else it`s just a shit talking. Ppls have to believe you, while I showed the facts and shady moves in this project. Honestly, every smart person should stay away from premined projects these days. Don`t want to spend more time for this scam.


To Mount Weather

3. No real names for founders and dev teams.......

Why is this this?? Why are you only using nicknames? It does not inspire confidence....AT ALL
Post
Topic
Board Mining (Altcoins)
Re: Which M2 adapter
by
Roby1
on 20/01/2018, 02:25:24 UTC
I have 3 Asus Prime Z270-A 9 card rigs, I use both spare slots on the boards with type A M2 adapters. I don't power them with the cable supplied. They work fine just plugging in and powered from the riser.

 
Post
Topic
Board Mining (Altcoins)
Re: Baikal Giant-B
by
Roby1
on 13/01/2018, 14:37:16 UTC
Interested