Search content
Sort by
Showing 20 of 25 results by Rough_R
Re: Gigabyte-GA-H110-D3A Mining board SUCKS! Can't get 6gpu up and running
The maximum here for this motherboard is 12 GPU using 8 pci-e adapter when I try with 13th GPU the motherboard don't boot, just power ON spinning fans and POWER OFF and then POWER ON again and repeat.
https://i.imgur.com/YnBtoZS.jpg
what model of adapter you use ? manufaturer ?https://i.imgur.com/YnBtoZS.jpg
Re: Gigabyte-GA-H110-D3A Mining board SUCKS! Can't get 6gpu up and running
My Board running 7 Nvidia GPU with 1x4 pcie adapter (5 gpu on MB and 2 gpu on adapter), sometimes my rig got BSOD (TDR failure) and the other times, everything look fine. But if only 6 GPU connected, it's running well without any issue (4 GPU on MB and 2 GPU on adapter or 6 GPU all in MB)
How much GPU can be run by this board smoothly, with 1 or 2 (1x4Pci-e adapter) ??
How much GPU can be run by this board smoothly, with 1 or 2 (1x4Pci-e adapter) ??
I made maximum to work 5+4 VGA ( RX580 Nitro+), 4 on 1x4 pcie adapter. But I have another adapter witch made me trouble, BSOD restarts blocks ... same model as first, probably bad product. Works few hours and then start to play with my nervs
Re: Gigabyte-GA-H110-D3A Mining board SUCKS! Can't get 6gpu up and running
Yes, works nice, managed to start 8 pieces of Rx-580. Only needed to reinstall drivers.
Right now you just using one adapter 1x to 4 pci-e and using 4x pci-e from the board or using two adapter 1x to 4x pci-e ? Any speed issues or have same speed like RX 580 are directly connected to the board ?
At this moment I have one 1x4 adapter with 3 GPU, dont see any substential difference from other 5 GPU connected on MB, they all are from 30-31 MH/s. I use adapter for 7-8 days, and it works nice , ordered only 1pt to see how it works
Re: Gigabyte-GA-H110-D3A Mining board SUCKS! Can't get 6gpu up and running
Anyone with this board running with 1 to 4 pci-e adapter with success ? I am waiting for the adapter arrive to give it a try.
Yes, works nice, managed to start 8 pieces of Rx-580. Only needed to reinstall drivers.
Re: if you live in the EU, watch your profit. I've already turned off my rigs.
Everybody who dont see any profit and dont believes must stop,
but every business have good times and bad times... its up to you :-)
For some this is a hobby... and they are wiling to loose a cup of coffee a day
but every business have good times and bad times... its up to you :-)
For some this is a hobby... and they are wiling to loose a cup of coffee a day
your coffee is very expensive then. my electricity cost per day on a 189,8mh/s 6 gpu mining rig (880W from the wall, so brutally nice) is about 3.8$ per day (0.18$ per kWh).
it's not a matter of good times or bad times. It's a matter of not knowing if there will ever be good times. And you cannot assure that. Or yes??
I own a little store for almost 20 years and it was good and bad years, sometimes you work only to pay bills but still we work....
Something we will earn, and difference for a a day is coffee
I believe .... in better times
you mean 0,12$ per kWh right?? not 0,012$. Guess that's with taxes included right??
Re: if you live in the EU, watch your profit. I've already turned off my rigs.
Everybody who dont see any profit and dont believes must stop,
but every business have good times and bad times... its up to you :-)
For some this is a hobby... and they are wiling to loose a cup of coffee a day
but every business have good times and bad times... its up to you :-)
For some this is a hobby... and they are wiling to loose a cup of coffee a day
your coffee is very expensive then. my electricity cost per day on a 189,8mh/s 6 gpu mining rig (880W from the wall, so brutally nice) is about 3.8$ per day (0.18$ per kWh).
it's not a matter of good times or bad times. It's a matter of not knowing if there will ever be good times. And you cannot assure that. Or yes??
I own a little store for almost 20 years and it was good and bad years, sometimes you work only to pay bills but still we work....
Something we will earn, and difference for a a day is coffee
I believe .... in better times
Re: if you live in the EU, watch your profit. I've already turned off my rigs.
Everybody who dont see any profit and dont believes must stop,
but every business have good times and bad times... its up to you :-)
For some this is a hobby... and they are willing to loose a cup of coffee a day
but every business have good times and bad times... its up to you :-)
For some this is a hobby... and they are willing to loose a cup of coffee a day
I am using the blockchain drivers, moded the bios to get the 29 MHs,
after little playing and fine adjusting the memory/core clock as well as the voltage I get from 30,5-31 mh/s. on ETH.
1150/2150/900mv . about 95-100 w from wall.
My Nitro+ has Samsung memory
after little playing and fine adjusting the memory/core clock as well as the voltage I get from 30,5-31 mh/s. on ETH.
1150/2150/900mv . about 95-100 w from wall.
My Nitro+ has Samsung memory
In my rig i have 6pcs Gigabyte 1070 G1 8gb
in Afterburner set 70% power,650+ mem and 50+core.
and have temp around 60C, 31,5-32,0 mh/s and about 110w from wall.
and main display card is int.Intel.
What is your VGA model?
in Afterburner set 70% power,650+ mem and 50+core.
and have temp around 60C, 31,5-32,0 mh/s and about 110w from wall.
and main display card is int.Intel.
What is your VGA model?
Re: My RX580 Benchmarking and Results: 30.5Mh/s @ 77.5W (+ 1130MH/s Dcr w/ 125W)
Hi,
I recently got few of sapphire rx 580 nitro+ 4gb Samsung memory,
moded bios with Polaris 1.67, applied UBERMIX 3.1,
moded TDP from 145 to 120W, and Max Power Limit from 175 to 140W.
Got about 29,5mh/s at ETH.
What can mod next to rise MH/s and lower W from wall ?
in Afterburner lowered Power limit -10 and control fan.
When rise mem to +100 got about 30.5mh/s but becomes unstable.
Regards
I recently got few of sapphire rx 580 nitro+ 4gb Samsung memory,
moded bios with Polaris 1.67, applied UBERMIX 3.1,
moded TDP from 145 to 120W, and Max Power Limit from 175 to 140W.
Got about 29,5mh/s at ETH.
What can mod next to rise MH/s and lower W from wall ?
in Afterburner lowered Power limit -10 and control fan.
When rise mem to +100 got about 30.5mh/s but becomes unstable.
Regards
Samsung micron?
Re: My RX580 Benchmarking and Results: 30.5Mh/s @ 77.5W (+ 1130MH/s Dcr w/ 125W)
Hi,
I recently got few of sapphire rx 580 nitro+ 4gb Samsung memory,
moded bios with Polaris 1.67, applied UBERMIX 3.1,
moded TDP from 145 to 120W, and Max Power Limit from 175 to 140W.
Got about 29,5mh/s at ETH.
What can mod next to rise MH/s and lower W from wall ?
in Afterburner lowered Power limit -10 and control fan.
When rise mem to +100 got about 30.5mh/s but becomes unstable.
Regards
I recently got few of sapphire rx 580 nitro+ 4gb Samsung memory,
moded bios with Polaris 1.67, applied UBERMIX 3.1,
moded TDP from 145 to 120W, and Max Power Limit from 175 to 140W.
Got about 29,5mh/s at ETH.
What can mod next to rise MH/s and lower W from wall ?
in Afterburner lowered Power limit -10 and control fan.
When rise mem to +100 got about 30.5mh/s but becomes unstable.
Regards
Re: Funakoshi Cuda miner is fast and clean from viruses (windows, ubuntu, fedora)
miner crashed 3 times in 24h, window just shut down. worked about 5-6 hours and ....
has a potential, but there is some bug, add log file
has a potential, but there is some bug, add log file
Have you re-downloaded the miner after I have uploaded the bug fix an hour ago?
I will add logfile soon.
New version works much better and faster, runs stable for more than 12h, no of shares is little less than Bminer and DSTM, Good work.
Re: Funakoshi Cuda miner is fast and clean from viruses (windows, ubuntu, fedora)
now started at first and took 4 mins till line " Authorised worker..." internet is fine, another rig works normally, and teamviewer is connected
slowly reads GPU-s and temperatures , as i said will let it go for 24h and then will post results, that should be representative
is there anyway to make logs ?
slowly reads GPU-s and temperatures , as i said will let it go for 24h and then will post results, that should be representative
is there anyway to make logs ?
I have the same problem on zcl.coinmine.pl, any combination of user name worker and password even that from their site not work...
miner is mining... but on my dashboard shows nothing, nor hashrate nor worker name... tried for hours :-(
miner is mining... but on my dashboard shows nothing, nor hashrate nor worker name... tried for hours :-(