Search content
Sort by
Showing 20 of 951 results by ShopemNL
For sale; Bought loads of crypto merchandise back in 2018, to display in our miner shop as a cool addition. But never got the change to finish it due lack in time.
I wanted to start selling it in the webshop cryptomerch.eu, but as always have alot of different projects i have my focus on.
The stock contains more than 100 tshirt, crypto coins, caps, cushions and crypto wallets. With a retail price over 5000€
Selling it for set price of € 1500,- excl VAT.
I wanted to start selling it in the webshop cryptomerch.eu, but as always have alot of different projects i have my focus on.
The stock contains more than 100 tshirt, crypto coins, caps, cushions and crypto wallets. With a retail price over 5000€
Selling it for set price of € 1500,- excl VAT.
Te koop aangeboden. CryptoMerch.eu
In 2018 heb ik ooit een sloot aan crypto merchandise gekocht om aan te bieden in mijn crypto winkel, echter is dit er nooit van gekomen en heb ik de webshop nooit afgemaakt. De productfotos waren wel al gemaakt en zijn dus beschikbaar.
Het betreft 100de tshirts, kussens, muntjes en wallets met een verkoop waarde van zon 5000 EUR
Zit jij in de crypto dan is dit een unieke kans om een leuke webshop te beginnen.
Vaste prijs € 1500,- excl BTW
In 2018 heb ik ooit een sloot aan crypto merchandise gekocht om aan te bieden in mijn crypto winkel, echter is dit er nooit van gekomen en heb ik de webshop nooit afgemaakt. De productfotos waren wel al gemaakt en zijn dus beschikbaar.
Het betreft 100de tshirts, kussens, muntjes en wallets met een verkoop waarde van zon 5000 EUR
Zit jij in de crypto dan is dit een unieke kans om een leuke webshop te beginnen.
Vaste prijs € 1500,- excl BTW
Re: BITBILL.eu -> Pay all your bills with Bitcoins! - INSTANT FULFILLMENT
@ShopemNL
I got a transaction done on 12. december that still shows "paid (but unconfirmed) in the orderstatus page. It has been confirmed some hours later so its "hanging" as pending payment for ten days now.
I already messaged your support but did not get an answer till now.
Please take a look at it.
I got a transaction done on 12. december that still shows "paid (but unconfirmed) in the orderstatus page. It has been confirmed some hours later so its "hanging" as pending payment for ten days now.
I already messaged your support but did not get an answer till now.
Please take a look at it.
Same here @ShopemNL
send mails and FB message, no response, unconfirmed status for 2 days
This was an old issue they had in their system. But this was fixed later! I remember this problem and can confirm the issue has been cleared. Contact their support and all will be fine!
Thanks for your support
For the fastest response please contact us trough the contact form or sent us a direct email to support@bitbill.eu
Re: BITBILL.eu -> Pay all your bills with Bitcoins! - INSTANT FULFILLMENT
Hi Guys,
Sorry for the delay in answer. We are currently experience heavy load / ddos attacks.
For the users that are having problems with current transactions please email us or sent me a PM here and i will look into this asap.
Sorry for the delay in answer. We are currently experience heavy load / ddos attacks.
For the users that are having problems with current transactions please email us or sent me a PM here and i will look into this asap.
[CRYPTO SERVICES] Crypto company for sale with 3 active services since 2015
[CRYPTO SERVICES] Crypto company for sale with 3 active services since 2015
Due to the fact that i want to place my focus on my other businesses i have my company for sale. You wont actually buy the company but you will buy the projects inside the company. There are currently 3 services running where two generating the income since 2015 and the last is an addition to. Since all three services work together i am selling them in one buy.
With one service users will be able to pay there bills with crypto, the other service is a crypto payment service provider for actually receiving the crypto currency and the last one is the user service, you can create an account and you will be able to use all services.
Customers are EU based, all products run in EUR.
Price low xxx.xxx EUR.
For more information please contact me trough PM.
Due to the fact that i want to place my focus on my other businesses i have my company for sale. You wont actually buy the company but you will buy the projects inside the company. There are currently 3 services running where two generating the income since 2015 and the last is an addition to. Since all three services work together i am selling them in one buy.
With one service users will be able to pay there bills with crypto, the other service is a crypto payment service provider for actually receiving the crypto currency and the last one is the user service, you can create an account and you will be able to use all services.
Customers are EU based, all products run in EUR.
Price low xxx.xxx EUR.
For more information please contact me trough PM.
First prototype cases, first batch coming soon.
Very nice - I see you're a fan of 8020 as well!
What material are you using for your sides? I use acrylic but primarily just because I have a laser cutter and it's one of the easiest materials to work with:
One suggestion you might consider - I experimented a fair bit with airflow, and if I'm interpreting things right you're pushing in on the bottom of the front and pulling out on the top of the back. I tried a similar approach, but it ended up being less efficient, and the best was actually making the push and pull parallel to eachother, and just putting vent slats above the front of the inlet fans, so hot air can't get trapped in there. If you put the vents above the exhaust, then it tends to short-circuit - but as you can see in my latest builds, I just opted for no back panels at all and use industrial tubeaxial fans.
What are these plugs in the gpus?
Do those work for remote access screen resolution issues? I notice that I have screen resolution issues when I remotely access the miner if I don't have a monitor plugged into at least one graphics card, and that is true for both RDP and teamviewer. Windows wants to default to something like 800x600 when it thinks it can't detect a monitor - also have display issues with MSI afterburner in remote access sessions which is what I think you are referring to. I can sometimes use DVI plugs for that purpose but they don't always work (depends on the card I guess).
Also where do you get those? I see some on amazon but they are pricey.
Also where do you get those? I see some on amazon but they are pricey.
Funny, someone just asked me about those yesterday!
I've used two different dummy plugs:
http://amzn.to/2doy7xV
and
http://www.ebay.com/itm/191567271934?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
TBH I really can't tell the difference between the two - I mostly use the eBay ones because if you buy 20 or more he'll do $11/each, but the Amazon one is Prime so if I f-up and need one I can get it from them fast.
It definitely solved the resolution for VNC, I don't use the other two, so can't speak to it or not. You really only need one in most cases, in your primary card - I just use the so I can see more stats.
Primary card i can understand to fix remote access resolution, but why the hell would you doend 6x 15 bucks when u dont need to, how can the shown temps be wrong?
link no work, maybe your official site ? nice case. more pix thx;)
Should work : https://www.ethereumminer.eu/product/Behuizingen/ETH-BEHUIZ-SIMPLEXX/The-SimpleXX-Stacker-open-frame-behuizing.html
btw, checkout this link from ShopemNL - for your open cage frame... https://www.ethereumminer.eu/product/Behuizingen/ETH-BEHUIZ-SIMPLEXX/The-SimpleXX-Stacker-open-frame-behuizing.html
If you are intrested in the frame please contact me by pm... Next week ill show pics of our miners build for our customers..
link no work, maybe your official site ? nice case. more pix thx;)
Should work : https://www.ethereumminer.eu/product/Behuizingen/ETH-BEHUIZ-SIMPLEXX/The-SimpleXX-Stacker-open-frame-behuizing.html
looking nice, nice site, nice work
Check out his list of new & used GPU rigs too... use Google translate to navigate the website
Working hard on english version of the website so you dont need to use google translate.
International shipping is no problem, as is payment in 12 different cryptocurrencies.
For more information just sent me a pm!
i see on picture is six gpu 
but you tell only 5 why
but you tell only 5 why
I cannot get the 6th GPU to be recognized by W8.1
Some tips to try fix it from fellow forum members which I will try this weekend.
Just use this mod : https://lbr.id.lv/6xgpu_mod/6xGPU_mod.html
i see on picture is six gpu
but you tell only 5 why
but you tell only 5 why
I cannot get the 6th GPU to be recognized by W8.1
Some tips to try fix it from fellow forum members which I will try this weekend.
Just use this mod : https://lbr.id.lv/6xgpu_mod/6xGPU_mod.html
Big thanks ShopemNL for the mod.
All 6 x MSI R9 390 GPUs are working on the ASrock H81 BTC board.
Currently averaging 160MHs without overclocking with qtminer.exe on ethermine.org pool.
Glad to send more members to visit your online shop.
Postnotes:
PSU1 (EVGA1300) = 1180w
PSU2 (EVGA1300) = 580w
Total both PSU = 1760w
This exceeds the EVGA1600 that I planned to do for the other 3 rigs!
Undervolt?
Thanks
No problem!You can try and set down power in crimson? Depending on how much you will clock you cards.
R9 390 should not take more then 275W so your power is correct.
160MH/s is not bad, but you can get 180/190 with ease. My R9 390 in my desktop is doing 32-35 on 24/h average.
i see on picture is six gpu
but you tell only 5 why
but you tell only 5 why
I cannot get the 6th GPU to be recognized by W8.1
Some tips to try fix it from fellow forum members which I will try this weekend.
Just use this mod : https://lbr.id.lv/6xgpu_mod/6xGPU_mod.html
Big thanks ShopemNL for the mod.
All 6 x MSI R9 390 GPUs are working on the ASrock H81 BTC board.
Currently averaging 160MHs without overclocking with qtminer.exe on ethermine.org pool.
Glad to send more members to visit your online shop.
Postnotes:
PSU1 (EVGA1300) = 1180w
PSU2 (EVGA1300) = 580w
Total both PSU = 1760w
This exceeds the EVGA1600 that I planned to do for the other 3 rigs!
Undervolt?
Thanks
No problem!You can try and set down power in crimson? Depending on how much you will clock you cards.
R9 390 should not take more then 275W so your power is correct.
160MH/s is not bad, but you can get 180/190 with ease. My R9 390 in my desktop is doing 32-35 on 24/h average.
Whats your overclocking advise? currently I am 1040mhz core clock and 1500mhz memory clock. Would love to get 32-35mhz for every card
PM me your settings
link no work, maybe your official site ? nice case. more pix thx;)
Should work : https://www.ethereumminer.eu/product/Behuizingen/ETH-BEHUIZ-SIMPLEXX/The-SimpleXX-Stacker-open-frame-behuizing.html
Changed language to english
New link : https://www.ethereumminer.eu/product/Cases-Frames/ETHEH-BEHUIZ-SIMPLEXX/The-SimpleXX-Stacker-open-frame-case.html
Working hard to complete some orders!
What's the total hashrate? and whats the model of the cards?90-110MH/s 6x R7 370 2GB
Yes,