Could you enable API access in the next release ( its a ccminer 2.2.5 fork you said, so you just enable it ), its really useful to monitor the miner remotely , right now if miner crash or so there is no fast way to understand that.

We willing to offer 75k for all , i'm asking for buyer, who has interest.

p.s: You can pm me for more info

What is the lowest price per unit you can accept ?

I know there are already posts about this problem , but did not found workaround , on mainboard with 12 polaris gpus win 10 1709, and claymore dual miner ( tested with 11.2 down to 10.6 ) ethman do not work when all 12 gpus are mining , lost connection immediately , when start just 8 gpus to mine ethman works without problem , it's not cpu problem , cpu load stays 20-30% , remote software is working good ( teamviewer , splashtop , tightvnc ) , i tryed phoenix miner 2.7c recently which works with ethman and with it there is no problem when 12gpus are mining , cpu stays the same load 20-30% , so the problem must be with claymore's miner socket implementation , web server or something like that when gpus are more than 8 , or some hardcoded setting remain from the times when driver and windows accept only 8 gpus . Can you check and fix this problem please .

p.s: I read through the posts and did not find workaround for this , so if there is one , my apologies.

It was saturday/sunday I think, takes time to fix , maybe about a day. Find the topic in miningpoolhub reddit page if you want.

Same thing happened last week or so , its just front end glitch , when pool operator fix it , everything mined is distributed accordingly , no losing anything , its just annoying that happen more frequent recently.

On the front pages shows zcoin pool found block few minutes ago , but zcoin pool dashboard , block , tranzactions and so is stucked after 69755 block , hope its just wrong front end web stats problem with pool specific webpage or so... and everything is working as it should...

Zcoin pool has problem , its stuck with this block 69788 --> 317,271 (done: 3172.51%) , has not found block for over 5 hours. Its stuck there... its not possible to not found block for so long with pools hashrate...

His screenshots was with cryptonight-light algoritm , mining aeon which using only 1mb size , not 2mb as xmr , so its hashrate is doubled , so 2k aeon is about 1k xmr ,nothing special about his screenshots , ver 11 support cryptonight-light now.

edit: for 4gb cards -h 928 is also good , ( 896+32 ) , 960 goes to high then , no free ram to work.

Ver 11 is a nice improvement over 10.2 , rx 470 4gb 1170/2000/875 was 845h/s in 10.2 ver. , in ver. 11 is 920h/s same settings, as much as sgminer and gatelessgate 896/8/2 , so a very good update.

Nvidia Inspector cli with parameter -setFanSpeed:0,80 ( 1st value is the number of the card 0,1,2,3... , second value is the fixed fan speed in percentage ) , you can use also -setTempTarget:0,0,70 , -setPowerTarget:0,70 if its working for your purpose.

example : nvidiaInspector.exe -setFanSpeed:0,80 -setFanSpeed:1,80 -setFanSpeed:2,80

This do the same as set fixed fan speed in MSI Afterburner , as for fan curve there is no such functionality for now.

Are you sure your elpida memory is running 2200mhz from 1750mhz stock , I do not see elpidas to go so high , you have to use some very loose timings. With eliovp elpida strap you get at 1150core/1950mem about 28.5+ mhs eth , higher clock the memory higher the hashrate.

On some 470/570 4gb elpida 1750 and 2000 straps are the same , using eliovp strap which is based on 1500 strap ( with some small changes ) on 1750/2000 straps will give you boost to go to about 30mhs depends of the lottary how much high your memory clock without errors.

XFX RX 470 4GB Elpida with eliovp's strap that's around the forum for long time with equal TRCDR/A fix, I make around 850h/s with claymore xmr 10.2 , and about 920h/s with gateless gate at 1170core/2000mem/875mv , at about 2-3-4 errors per hour. With claymore xmr 10.2 hashrate is stable with rare low fluctuations to 800-820 , with gateless gate 0.1.3-pre6b fluctuations are a bit more , but averages at about 920-925 , new gateless gate sharp gives me almost the same results , old gateless gate is based on sgminer , so hashrate is about the same as sgminer, for me a little bit more than sgminer-5.5.5-gm-nicehash-8.

edit: With the same strap, same 1170/2000/875 on ETH make 29.5mhs , eth and xmr are stable with these settings , memory can go up to 2050 before significant error rate , but stability goes down with it. Claymore xmr 10.2 settings -h 928 , gateless gate settings 896/8/2 , claymore eth 10.2 -dcri 8

NsGpuCNMiner.exe -xpool stratum+ssl://cryptonight.eu.nicehash.com:33355 -xwal btc-addr.rig1 -xpsw x -h 928 -dmem 1 -cclock 1167 -cvddc 875 -mclock 2000 -mvddc 875

btc-addr - is yours nicehash btc address
rig - is your rig name ( if you use it )
This is setup for 4GB vram card , if you have 8GB you can change -h 928 to -h 1800-1900 , just test it to find thah best fits to you , "-cclock 1167 -cvddc 875 -mclock 2000 -mvddc 875" - this is core and memory speed and voltage , edit it to fits for you or just delete it if you use other program to overclock/undervolt.

Thanks for the nicehash support update , its working as it should now , overall diff from 9.7 is about 4% same settings for me ( 9.7 - 754 , 10.2 - 784 ) at 1167/1940 core/mem 880mv on xfx rx 470 4gb elpida , eth bios settings edit , maybe if I loosen timings will get more , monero do not like tight timings as much as speed. Power consumption is reduces in 10.2 about 25% ( 9.7 - 64w , 10.2- 51w ). My settings for 10.2 are -h 928 , I'm with 32 gigs of ram , 1gb virtual , do not see ram consumption increase more , no errors about virtual memory , will try with 4gb virtual memory whether have difference or not.

Version 10 not compatible with nicehash , unsecure and ssl connection always reject shares with error "..invalid nonce ... is it nicehash comapatible.. " 9.7 was working fine ?

Hi , i have a problem with new one Vega 64 rig ( 6 x Vega 64 ) , when using official AMD driver 17.9.1 there are no problems , everything is working as is should , i can get 38mhs eth stable and 44 exp stable with core 900 / 1100 memory on 875mv both using OverdriveNTool . Try to test xmr with this setup and geting about 650 per card , which is expectable , try to set on HBCC on every card , but cannot success , I can enable it only on 4 of 6 cards , other 2 set it on , apply , drivers resets itself and stay off , tryed anything and on card 2 and 3 cannot enable it ? Any ideas ?
And another question I try 23 Aug Blockchain driver , clean install , ddu , driver installs OK , but machine stuck with artefacats/grey lines/ grey screen seconds after start miner no matter eth or xmr , stuck on default settings , stuck on downclock/downvolt settings too, so I returned to 17.9.1 , any ideas what can I do/try to make blockchain driver to work ?

edit: Rig is with 8 gigs of ram, intel celeron 1151, 6x vega 64 , I have HBCC slider on all 6 cards , but only on 4 I can enable it and move the slider , virtual memory is set to 32gb ?  Maybe this is the problem 4 x 8gb = 32 , will try with 64gb virtual memory whats gonna happen ?

Yeah , good stats , can you share a link with this bios image , i have 570 elpida too and would like to try it.

With blockchain drivers and XFX RX 470 elpida memory I get 28.7mhs , core-1167/mem-1940 @ 0.875v - core and 0.900v mem , about 66W power shown in MSI AB , Afterburner settings -96mv , core 1167 , mem 1940 , no mem errors , bios modded with same performance strap that is included in latest polaris editor 1.6 , I find it before here in forums and used it from then , that's max I can get memory overclock , when passed 1945-1950mhz everything stuck , black screen , blue screen or so on and need to force restart , tried many different straps before , even stocks can not get to pass 1950mhz mem, even tried to lower mem voltage but stuck here too , cannot lower voltage more than 0.875/0.900 , tried bios edit mem voltages from 1000 to 950/900 and no work , edit core pointer from 8 to 6 and above and no work , and in one moment stopped buzzing this card anymore , it's a very tricky card and I cant get it to pass this settings more.  If someone have any more success with xfx 470 elpidas and is willing to share, you are wellcome.