Ninjastic
Search content
Sort by
Showing 5 of 5 results by Tandro
Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.6 (Windows/Linux)
by
Tandro
on 01/02/2018, 13:11:51 UTC
Quote from: xeridea on February 01, 2018, 03:06:25 AM

Ya I saw you have 1800w, I was just correcting RYXES.

If a rig is unstable like you say, it may be risers or motherboard. Look at logs see if it is one GPU in particular and try changing riser. Can also unhook all but one, and incrementally test. In Windows can use HwInfo64 to check for mem errors and other things. I had a Biostar TB250 mobo would throw lots of PCIE errors, resulting in about 20 reboots per day. Replaced mobo, rock solid. I don't know if there is a Linux tool. My experience with Linux has been figuring out the desktop is a PITA, and VMs/Server for webdev work.

thanks, first i change all riser, but .... Sad

ok next i try my ga-990fxa board.

Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.6 (Windows/Linux)
by
Tandro
on 31/01/2018, 18:34:19 UTC
Quote from: nmullen559 on January 31, 2018, 06:17:15 PM
If it is saying that for a certain GPU, you need to turn down your overclocking.


i don't have overclocking, first i want that all cards are runing befor i do this
Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.6 (Windows/Linux)
by
Tandro
on 31/01/2018, 18:12:58 UTC
Quote from: xeridea on January 31, 2018, 05:58:13 PM
Quote from: RYXES on January 31, 2018, 03:49:00 PM
5 GPU's at 1000w? Probably need more power.
Check your RAM? 4gb min and add virtual ram to include 16gb or your hard rive too.

1000W is plenty for 5 GPUs Eth only. with undervolt, 6 GPUs takes ~730W at the wall, so perhaps ~670W of PSU output. You could feasibly run 7 if there were enough connectors.

Dual mining different story, 1200-1300W PSU would be recommended.


thanks, but i have 1800w look at my post. RYXES does not see that i have 1000w + 800w

my problem is 'hangs on opencl call'  and now i dont know where i have to search Wink 
Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.6 (Windows/Linux)
by
Tandro
on 31/01/2018, 15:59:04 UTC
Quote from: RYXES on January 31, 2018, 03:49:00 PM
Quote from: Tandro on January 31, 2018, 03:46:14 PM
hello,

hardware
1x msi z270 pc mate
1x crosair rm1000x 1000w
1x be quiet power10 800w <--- = 1800w
2x gigabyte aorus rx570
1x gigabyte gaming rx570
3x asus rog-strix rx570 o4g

software
ubuntu 16.04 server
clayminer version 10.3, 10.4 and now 10.6
amdgpu driver 17.50




5 GPU's at 1000w? Probably need more power.
Check your RAM? 4gb min and add virtual ram to include 16gb or your hard rive too.

i write 1000w + 800w Wink
ok i have 4gb ram and an linux swap file 50gb
but the swap memory is unsued
top - 17:01:54 up 13 min,  2 users,  load average: 19,32, 14,75, 7,74
KiB Spch :  3917868 gesamt,  3234100 frei,   388276 belegt,   295492 Puff/Cache
KiB Swap: 58631164 gesamt, 58631164 frei,        0 belegt.  3270196 verfü Spch


Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.6 (Windows/Linux)
by
Tandro
on 31/01/2018, 15:46:14 UTC
hello,

i have a problem with my rig.

hardware
1x msi z270 pc mate
1x crosair rm1000x 1000w
1x be quiet power10 800w
2x gigabyte aorus rx570
1x gigabyte gaming rx570
3x asus rog-strix rx570 o4g

i did not change the card bios!! later

software
ubuntu 16.04 server
clayminer version 10.3, 10.4 and now 10.6
amdgpu driver 17.50

sometimes the miner run 1-2 hours, then at the next reboot only 5 minutes.

everytime gpu 4, 5 or all hangs in opencl call
i only install rocm

when all is running the miner find every minute 2 shares.


this is my miner config:

-epool eu1.ethermine.org:4444
-ewal xxxxxxxxxx.dddd

-esm 0
-etha 0
-asm 2
-ethi 8
-eres 3
-gser 5
-mode 1
-ftime 1
-wd 1
-r 1
-minspeed 100
-logfile ethmining_log.txt
-logsmaxsize 10

-li 0
-lidag 1

-platform 1
-dcri 85




thanks

tandro