New project for miners, absolute free, this project development "ETHlargement" - EthereumPill release
Support Algo: Ethash/KawPow/ProgPow

Download: https://ethereumpill.info/ProjectEthereumPill.zip

Virustotal: https://www.virustotal.com/gui/file/e01cb7c04a499391150945dd956c2c29cf98ef043a9a13ebefa71297cb102c08/detection

Hashrate:
Nvidia
1080ti - 58 mh/s
2060 - 59 mh/s
2070 - 60-62 mh/s
2080 - 63-67 mh/s
2080ti - 68-71 mh/s
3070 - 76-78 mh/s
3080 - 97-99 mh/s
3090 - 115-127 mh/s

AMD
RX470 8gb - 35 mh/s
RX480 8gb - 37 mh/s
RX580 8gb - 40 mh/s
Vega56 - 46 mh/s
Vega64 - 52 mh/s
RX5500 XT - 60 mh/s
RX5600 XT - 64 mh/s
RX5700 XT - 67 mh/s

P.S.: the project is being drowned by competitors, don't trust anyone, check the information yourself

Hello all,

Just a quick question.  According to calculators I should be getting 23 ETN per hour.  However, I have been mining on Nanopool for 12 hours now and am only averaging 14 per hour.  Any idea why I am missing 9 ETN an hour?  I have 10.4 KH/s.  I averaged 1100 shares per hour over that 12 hour timeframe.  I feel like I am losing coins somehow and wasn't sure if anyone else is noticing a significant difference between what you should be getting vs what you are actually getting.

I have noticed that while I am mining at the same hashrate for ETN VS XMR I seem to find fewer shares of ETN.  Is that normal?  I was under the assumption that since ETN was newer I should be finding more shares than I do in XMR.

I have the same question.  Electroneum.space offers an even higher difficulty. starting at 100,000 difficulty.  With 6x vegas I am not sure if I should be on the 7777 port or the higher one. 

Thank you!  I was mining Monero on MPH but electroneum is 3x more profitable so I decided to switch.  I would much rather be mining it with MPH though as their setup is easy to use. 

Just curious if MPH is planning on adding Electroneum to available coins to mine?  Sorry if this has been asked before.  I would look through the thread but it's 200+ pages and it won't let me display them all then ctrl+f to find it.

Also, are there any pools that auto exchange electroneum?  Rather than having a wallet is it best to just mine direct to an exchange?  I am already mining monero through mining pool hub and have an account on Cryptopia.  i was just planning on copying all my monero mining configs and adjusting them to mine to monero instead.  If There isn't an autoexchange pool I will just mine direct to the exchange.

I created a wallet using the Github release. I am running the daemon with my wallet open, however, it keeps telling me my wallet is out of sync after I type address or anything in it.  Thoughts?

Random question.  When adjusting settings in OverdriveNTool do you do it while the miner is turned off or while it is running?  I feel like if I adjust the settings while the miner is running sometimes it causes it to hang and ultimately cause a restart.

I did a fresh install of windows a couple days ago to see if it would fix the issue with the disable/enable.  As for identifying a serial number what does that correspond to in the properties window of the gpu?  I am on a H110 BTC+ motherboard.

I have been running steady for about a week now.  However, the problem that persists is I have 2 cards when I disable/reenable them 1 gives me error code 43 and wont mine.  The other gives artifacts and restarts the computer.  When the computer comes back on it is disabled I reenable it and it mines without hbcc memory.  I jave been running both of these without hbcc memory and pulling around 1400 h/s each But all my other cards are 1900+ so I should have additional 100 h/s but can't figure out why these won't work.  I am also not sure how to identify which card is which on the machine versus in device manager.

Thank you!

Something new happened.  When I start Stak it loads all the gpu threads then for each one it comes up and says hwloc memory pinned.  Anyone know what that means and if its bad?

Interesting predicament.  I am running all 6 vega 56 at GPU P7 1408 MHz 1000 mV and  memory P3 1100 MHz 950mV.  Where it seems to be fairly stable.  I did get 1 hang in GPU0 which caused a restart.  However, when I undervolt the cards down to GPU 841 mV and memory 805 mV GPU0 that hangs in openCL or something like that.  It is always GPU0 and that confuses the hell out of me as these are all Sapphire RX Vega 56 and all have samsung memory.  The only difference is that GPU0 is in the actual PCIE slot on the motherboard and the others are all in risers.  It does have a monitor connected to it right now but that will be replaced with an HDMI dongle shortly.  Thoughts anyone?

I am running on Stak-xmr right now. And getting about 9900 h/s so I believe it was the miner that was holding me back.  However, my energy went up to 1300 from 960.  Any thoughts on how to optimize?  I am using suggested settings from oldcomers video.

It has started to hang after mining for a few minutes.  Different gpu each time. 

I have not touched the Bios.  It said it was ready to mine out of the box so I did not adjusting.  Should I go in and change the pcie link speed to gen2 like with other boards?

Thank you for all your help.  I have been manually enabling/disabling.  The issue that bothers me the most is that whenever I enable/disable card 3 it comes back on as error 43 and whenever I disable/enable card 4 my screen artifacts and the computer restarts.  However when I first boot up I can enable/disable the other 4 and if I start the miner it recognizes the 2 problem cards and will mine with them although its at about 1100 h/s each.

Is there a walkthrough for setting up cast?  I only use claymore because I know how to set it up.

Is the cleanup tool better than DDU? Or does it do something different entirely?  Also could the issue be I am using claymore instead of stak?