Search content
Sort by
Showing 20 of 83 results by WiWi
Ze zijn dus nog nieuw?
Kun je me een PM sturen wat het kost inclusief verzendkosten en wat foto's?
Prijzen zijn al wel iets gedaald intussen http://technobit.eu/index.php
Kun je me een PM sturen wat het kost inclusief verzendkosten en wat foto's?
Prijzen zijn al wel iets gedaald intussen http://technobit.eu/index.php
Re: TECHNOBIT support tread + customer feedback- 800 Ghs enclosed miner -399 EUR
Ok, my hex4M is working fine now.
I bought some new cooling past, i did work out fine
Thx, for the help Marto
Vesi: can you send me the details where to ship the defective board? I don't want the board to end at the local postoffice
I bought some new cooling past, i did work out fine
Thx, for the help Marto
Vesi: can you send me the details where to ship the defective board? I don't want the board to end at the local postoffice
Re: TECHNOBIT support tread + customer feedback- 800 Ghs enclosed miner -399 EUR
Hi,
For sure the board was tested.
you have to check coolers attachment.
use the whole set you had on your previous board.
Give me TW access or contact Martin on skype
Regards: Vesi
For sure the board was tested.
you have to check coolers attachment.
use the whole set you had on your previous board.
Give me TW access or contact Martin on skype
Regards: Vesi
Hi, vesi did indeed use the set on the previous board.
I am available now for TeamViewer connection, i'll send a PM in 2 minutes.
Ok, PM send
edit: tried 0_4_0, does not work at all. Switched back to version 0_3_9 again
thx to martin i know what to do now.
Re: TECHNOBIT support tread + customer feedback- 800 Ghs enclosed miner -399 EUR
mm, board goes zombie after 15 mins, hashrate at about 50 GH/s
what is the problem here?
with setting at 960 instead of 1024, it does about 200 GH/s, but still no stable hashrate
Going to try to use version 0_4_0
what is the problem here?
with setting at 960 instead of 1024, it does about 200 GH/s, but still no stable hashrate
Going to try to use version 0_4_0
Re: TECHNOBIT support tread + customer feedback- 800 Ghs enclosed miner -399 EUR
Hi,
just remove the whole set and mount it on your new board.
Regards : Vesi
just remove the whole set and mount it on your new board.
Regards : Vesi
Hi Vesi,
ok, thx. i'll work it out. Have already placed many coolers on cpu's was just wondering if there where any special things to think about in case of an hex4m
When i look at tracking & tracing of dpd, it will arrive tommorow
edit: 14-10-2014, it has arrived. today i'll swap the coolers.
Lot of errors, what could be the source of this? Vesi, are you Guys able to look into it with teamviewer? I cant find anything wrong.
[Firmware Version] => 20140817
cgminer: 4_5_0_52103f6
Reply was 'STATUS=S,When=1413363694,Code=70,Msg=CGMiner stats,Description=cgminer 4.5.0|STATS=0,ID=HEX80,Enabled=Y,Status=Alive,Elapsed=70,MHS 5s=215.9G,MHS av=229.5G,Hardware Errors=8,Hardware Errors%=0.2130,USB Read Errors=0,USB Write Errors=0,USB Reset Count=0,Miner Reset Count=0,Last Share Time=1413363687,Chip Count=8,Frequency=230,Core Voltage=860,PIC Voltage Readings=859,Chip1 Nonces=84,Chip1 Engines=32,Chip1 Dupes=0,Chip2 Nonces=76,Chip2 Engines=32,Chip2 Dupes=0,Chip3 Nonces=88,Chip3 Engines=32,Chip3 Dupes=0,Chip4 Nonces=80,Chip4 Engines=32,Chip4 Dupes=0,Chip5 Nonces=92,Chip5 Engines=32,Chip5 Dupes=0,Chip6 Nonces=96,Chip6 Engines=32,Chip6 Dupes=0,Chip7 Nonces=89,Chip7 Engines=32,Chip7 Dupes=0,Chip8 Nonces=83,Chip8 Engines=32,Chip8 Dupes=0|STATS=1,ID=HEXM0,Enabled=Y,Status=Alive,Elapsed=70,MHS 5s=88.10G,MHS av=57.68G,Hardware Errors=22,Hardware Errors%=2.2680,USB Read Errors=0,USB Write Errors=0,USB Reset Count=0,Miner Reset Count=79,Last Share Time=1413363683,Chip Count=4,Frequency=1024,Core Voltage=820,PIC Voltage Readings=817,Chip0 Nonces=198,Chip0 Dupes=5,Chip0 Timouts Reset=14,Chip0 HW Errors Reset=0,Chip1 Nonces=552,Chip1 Dupes=81,Chip1 Timouts Reset=18,Chip1 HW Errors Reset=0,Chip2 Nonces=36,Chip2 Dupes=45,Chip2 Timouts Reset=29,Chip2 HW Errors Reset=0,Chip3 Nonces=162,Chip3 Dupes=63,Chip3 Timouts Reset=18,Chip3 HW Errors Reset=0|STATS=2,ID=POOL0,Elapsed=70,Calls=0,Wait=0.000000,Max=0.000000,Min=99999999.000000,Pool Calls=0,Pool Attempts=0,Pool Wait=0.000000,Pool Max=0.000000,Pool Min=99999999.000000,Pool Av=0.000000,Work Had Roll Time=false,Work Can Roll=false,Work Had Expire=false,Work Roll Time=0,Work Diff=256.00000000,Min Diff=256.00000000,Max Diff=256.00000000,Min Diff Count=306,Max Diff Count=306,Times Sent=28,Bytes Sent=2915,Times Recv=39,Bytes Recv=8589,Net Bytes Sent=2915,Net Bytes Recv=8589|'
[STATUS] =>
(
[STATUS] => S
[When] => 1413363694
Code:
=> 70
[Msg] => CGMiner stats
[Description] => cgminer 4.5.0
)
[STATS0] =>
(
[STATS] => 0
[ID] => HEX80
[Enabled] => Y
[Status] => Alive
[Elapsed] => 70
[MHS 5s] => 215.9G
[MHS av] => 229.5G
[Hardware Errors] => 8
[Hardware Errors%] => 0.2130
[USB Read Errors] => 0
[USB Write Errors] => 0
[USB Reset Count] => 0
[Miner Reset Count] => 0
[Last Share Time] => 1413363687
[Chip Count] => 8
[Frequency] => 230
[Core Voltage] => 860
[PIC Voltage Readings] => 859
[Chip1 Nonces] => 84
[Chip1 Engines] => 32
[Chip1 Dupes] => 0
[Chip2 Nonces] => 76
[Chip2 Engines] => 32
[Chip2 Dupes] => 0
[Chip3 Nonces] => 88
[Chip3 Engines] => 32
[Chip3 Dupes] => 0
[Chip4 Nonces] => 80
[Chip4 Engines] => 32
[Chip4 Dupes] => 0
[Chip5 Nonces] => 92
[Chip5 Engines] => 32
[Chip5 Dupes] => 0
[Chip6 Nonces] => 96
[Chip6 Engines] => 32
[Chip6 Dupes] => 0
[Chip7 Nonces] => 89
[Chip7 Engines] => 32
[Chip7 Dupes] => 0
[Chip8 Nonces] => 83
[Chip8 Engines] => 32
[Chip8 Dupes] => 0
)
[STATS1] =>
(
[STATS] => 1
[ID] => HEXM0
[Enabled] => Y
[Status] => Alive
[Elapsed] => 70
[MHS 5s] => 88.10G
[MHS av] => 57.68G
[Hardware Errors] => 22
[Hardware Errors%] => 2.2680
[USB Read Errors] => 0
[USB Write Errors] => 0
[USB Reset Count] => 0
[Miner Reset Count] => 79
[Last Share Time] => 1413363683
[Chip Count] => 4
[Frequency] => 1024
[Core Voltage] => 820
[PIC Voltage Readings] => 817
[Chip0 Nonces] => 198
[Chip0 Dupes] => 5
[Chip0 Timouts Reset] => 14
[Chip0 HW Errors Reset] => 0
[Chip1 Nonces] => 552
[Chip1 Dupes] => 81
[Chip1 Timouts Reset] => 18
[Chip1 HW Errors Reset] => 0
[Chip2 Nonces] => 36
[Chip2 Dupes] => 45
[Chip2 Timouts Reset] => 29
[Chip2 HW Errors Reset] => 0
[Chip3 Nonces] => 162
[Chip3 Dupes] => 63
[Chip3 Timouts Reset] => 18
[Chip3 HW Errors Reset] => 0
)
[STATS2] =>
(
[STATS] => 2
[ID] => POOL0
[Elapsed] => 70
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 256.00000000
[Min Diff] => 256.00000000
[Max Diff] => 256.00000000
[Min Diff Count] => 306
[Max Diff Count] => 306
[Times Sent] => 28
[Bytes Sent] => 2915
[Times Recv] => 39
[Bytes Recv] => 8589
[Net Bytes Sent] => 2915
[Net Bytes Recv] => 8589
)
[Msg] => CGMiner stats
[Description] => cgminer 4.5.0
)
[STATS0] =>
(
[STATS] => 0
[ID] => HEX80
[Enabled] => Y
[Status] => Alive
[Elapsed] => 70
[MHS 5s] => 215.9G
[MHS av] => 229.5G
[Hardware Errors] => 8
[Hardware Errors%] => 0.2130
[USB Read Errors] => 0
[USB Write Errors] => 0
[USB Reset Count] => 0
[Miner Reset Count] => 0
[Last Share Time] => 1413363687
[Chip Count] => 8
[Frequency] => 230
[Core Voltage] => 860
[PIC Voltage Readings] => 859
[Chip1 Nonces] => 84
[Chip1 Engines] => 32
[Chip1 Dupes] => 0
[Chip2 Nonces] => 76
[Chip2 Engines] => 32
[Chip2 Dupes] => 0
[Chip3 Nonces] => 88
[Chip3 Engines] => 32
[Chip3 Dupes] => 0
[Chip4 Nonces] => 80
[Chip4 Engines] => 32
[Chip4 Dupes] => 0
[Chip5 Nonces] => 92
[Chip5 Engines] => 32
[Chip5 Dupes] => 0
[Chip6 Nonces] => 96
[Chip6 Engines] => 32
[Chip6 Dupes] => 0
[Chip7 Nonces] => 89
[Chip7 Engines] => 32
[Chip7 Dupes] => 0
[Chip8 Nonces] => 83
[Chip8 Engines] => 32
[Chip8 Dupes] => 0
)
[STATS1] =>
(
[STATS] => 1
[ID] => HEXM0
[Enabled] => Y
[Status] => Alive
[Elapsed] => 70
[MHS 5s] => 88.10G
[MHS av] => 57.68G
[Hardware Errors] => 22
[Hardware Errors%] => 2.2680
[USB Read Errors] => 0
[USB Write Errors] => 0
[USB Reset Count] => 0
[Miner Reset Count] => 79
[Last Share Time] => 1413363683
[Chip Count] => 4
[Frequency] => 1024
[Core Voltage] => 820
[PIC Voltage Readings] => 817
[Chip0 Nonces] => 198
[Chip0 Dupes] => 5
[Chip0 Timouts Reset] => 14
[Chip0 HW Errors Reset] => 0
[Chip1 Nonces] => 552
[Chip1 Dupes] => 81
[Chip1 Timouts Reset] => 18
[Chip1 HW Errors Reset] => 0
[Chip2 Nonces] => 36
[Chip2 Dupes] => 45
[Chip2 Timouts Reset] => 29
[Chip2 HW Errors Reset] => 0
[Chip3 Nonces] => 162
[Chip3 Dupes] => 63
[Chip3 Timouts Reset] => 18
[Chip3 HW Errors Reset] => 0
)
[STATS2] =>
(
[STATS] => 2
[ID] => POOL0
[Elapsed] => 70
[Calls] => 0
[Wait] => 0.000000
[Max] => 0.000000
[Min] => 99999999.000000
[Pool Calls] => 0
[Pool Attempts] => 0
[Pool Wait] => 0.000000
[Pool Max] => 0.000000
[Pool Min] => 99999999.000000
[Pool Av] => 0.000000
[Work Had Roll Time] => false
[Work Can Roll] => false
[Work Had Expire] => false
[Work Roll Time] => 0
[Work Diff] => 256.00000000
[Min Diff] => 256.00000000
[Max Diff] => 256.00000000
[Min Diff Count] => 306
[Max Diff Count] => 306
[Times Sent] => 28
[Bytes Sent] => 2915
[Times Recv] => 39
[Bytes Recv] => 8589
[Net Bytes Sent] => 2915
[Net Bytes Recv] => 8589
)
Re: TECHNOBIT support tread + customer feedback- 800 Ghs enclosed miner -399 EUR
Hi all,
When placing coolers on a HEX4M chips anything special to mind to? Or is it just the same as placing cooler on CPU?
Asking because in few days a new hex4m without coolers will arrive.
I've got standard cooling paste here, do i need special cooling paste, e.g. with extra silver in it, or can i use cooling pads instead of cooling paste?
Wilco
When placing coolers on a HEX4M chips anything special to mind to? Or is it just the same as placing cooler on CPU?
Asking because in few days a new hex4m without coolers will arrive.
I've got standard cooling paste here, do i need special cooling paste, e.g. with extra silver in it, or can i use cooling pads instead of cooling paste?
Wilco
Depends on the quality of your cooler blocks.
Some cheaper blocks (like mine) are not perfectly flat, giving rise to hotsposts on the die. this manifests as good hashing that goes bad after a little heat buildup, in this case you have two options:
[1] lap your cooler blocks to get them flat and use a good paste. best option but alot of work if you have many boards.
[2] use slim thermal pads with best conductivity you can get. this works better than paste because it has a little elasticity to it and always expands to fill voids.
regardless you should go for best thermal conduction you can get, for paste I use shin-etsu. for pads i use a thin thermal adhesive pad, the type used for sticking sinks on RAM etc (smeared with shin-etsu)
Ok, thx. i'll use pads then i've already got good quality right here.
I've got the artic coolers for the hex4M, they where delivered with the board
Re: TECHNOBIT support tread + customer feedback- 800 Ghs enclosed miner -399 EUR
Hi all,
When placing coolers on a HEX4M chips anything special to mind to? Or is it just the same as placing cooler on CPU?
Asking because in few days a new hex4m without coolers will arrive.
I've got standard cooling paste here, do i need special cooling paste, e.g. with extra silver in it, or can i use cooling pads instead of cooling paste?
Wilco
When placing coolers on a HEX4M chips anything special to mind to? Or is it just the same as placing cooler on CPU?
Asking because in few days a new hex4m without coolers will arrive.
I've got standard cooling paste here, do i need special cooling paste, e.g. with extra silver in it, or can i use cooling pads instead of cooling paste?
Wilco
Re: TECHNOBIT support tread + customer feedback- 800 Ghs enclosed miner -399 EUR
Hi Vesi,
Would be nice if i could receive the new HEX4M as soon as possible, the one i´ve got here is working on half speed since arrival 2 months ago.
If you guys could please send me the new one, i can return the defective one asap.
Its problem with controller chips as Martin explained to me
Regards
Wilco
Would be nice if i could receive the new HEX4M as soon as possible, the one i´ve got here is working on half speed since arrival 2 months ago.
If you guys could please send me the new one, i can return the defective one asap.
Its problem with controller chips as Martin explained to me
Regards
Wilco