using a last ver, mining with rx470 4G at simplemining OS at leafpool. Getting all incorrect shares. With and without OC.

 Trying RX470 4G with lolminer 1.01 on simplemining OS for Beam3, but getting "miner ended or crushed". Any help? Not enough memory or too old GPU?

Hello JCE!
I got issue with FX 8350. Got 2 fx8350 in different MB. One doing fine with this config

"cpu_threads_conf" :
[
     { "cpu_architecture" : "auto", "affine_to_cpu" : 1, "use_cache" : true },
     { "cpu_architecture" : "auto", "affine_to_cpu" : 2, "use_cache" : true },
     { "cpu_architecture" : "auto", "affine_to_cpu" : 3, "use_cache" : true },
     { "cpu_architecture" : "auto", "affine_to_cpu" : 4, "use_cache" : true },
     { "cpu_architecture" : "auto", "affine_to_cpu" : 5, "use_cache" : true },
     { "cpu_architecture" : "auto", "affine_to_cpu" : 6, "use_cache" : true },
     { "cpu_architecture" : "auto", "affine_to_cpu" : 7, "use_cache" : true },
]

 But second one gives me error "Failed to allocate 2MB Large Page Scratchpad Buffer, using normal memory (slower)."
Same configs. Same UPlexa coin. Only difference is failed system have 4G ram and OK system got 16G ram. Is it a case or something else? Large pages are unlocked for both systems. Hashrate at monero v8 a same(~350H/s).

 Here is a log.

              +--------------------------------------+
              | JC Expert Cryptonote CPU Miner 0.33n |
              +--------------------------------------+


For Windows 64-bits
Analyzing Processors topology...
AMD FX(tm)-8350 Eight-Core Processor
Assembly codename: bulldozer
  SSE2    : Yes
  SSE3    : Yes
  SSE4    : Yes
  AES     : Yes
  AVX     : Yes
  AVX2    : No

Found CPU 0, with:
  L1 Cache:    16 KB
  L2 Cache:  2048 KB, shared with CPU 1
  L3 Cache:  8192 KB, shared with CPU 1, 2, 3, 4, 5, 6, 7
Found CPU 1, with:
  L1 Cache:    16 KB
  L2 Cache:  2048 KB, shared with CPU 0
  L3 Cache:  8192 KB, shared with CPU 0, 2, 3, 4, 5, 6, 7
Found CPU 2, with:
  L1 Cache:    16 KB
  L2 Cache:  2048 KB, shared with CPU 3
  L3 Cache:  8192 KB, shared with CPU 0, 1, 3, 4, 5, 6, 7
Found CPU 3, with:
  L1 Cache:    16 KB
  L2 Cache:  2048 KB, shared with CPU 2
  L3 Cache:  8192 KB, shared with CPU 0, 1, 2, 4, 5, 6, 7
Found CPU 4, with:
  L1 Cache:    16 KB
  L2 Cache:  2048 KB, shared with CPU 5
  L3 Cache:  8192 KB, shared with CPU 0, 1, 2, 3, 5, 6, 7
Found CPU 5, with:
  L1 Cache:    16 KB
  L2 Cache:  2048 KB, shared with CPU 4
  L3 Cache:  8192 KB, shared with CPU 0, 1, 2, 3, 4, 6, 7
Found CPU 6, with:
  L1 Cache:    16 KB
  L2 Cache:  2048 KB, shared with CPU 7
  L3 Cache:  8192 KB, shared with CPU 0, 1, 2, 3, 4, 5, 7
Found CPU 7, with:
  L1 Cache:    16 KB
  L2 Cache:  2048 KB, shared with CPU 6
  L3 Cache:  8192 KB, shared with CPU 0, 1, 2, 3, 4, 5, 6

Preparing 7 Mining Threads...

+-- Thread 0 config ------------------------+
| Run on CPU:            1                  |
| Use cache:             yes                |
| Multi-hash:            no                 |
| Assembly module:       bulldozer          |
+-------------------------------------------+

+-- Thread 1 config ------------------------+
| Run on CPU:            2                  |
| Use cache:             yes                |
| Multi-hash:            no                 |
| Assembly module:       bulldozer          |
+-------------------------------------------+

+-- Thread 2 config ------------------------+
| Run on CPU:            3                  |
| Use cache:             yes                |
| Multi-hash:            no                 |
| Assembly module:       bulldozer          |
+-------------------------------------------+

+-- Thread 3 config ------------------------+
| Run on CPU:            4                  |
| Use cache:             yes                |
| Multi-hash:            no                 |
| Assembly module:       bulldozer          |
+-------------------------------------------+

+-- Thread 4 config ------------------------+
| Run on CPU:            5                  |
| Use cache:             yes                |
| Multi-hash:            no                 |
| Assembly module:       bulldozer          |
+-------------------------------------------+

+-- Thread 5 config ------------------------+
| Run on CPU:            6                  |
| Use cache:             yes                |
| Multi-hash:            no                 |
| Assembly module:       bulldozer          |
+-------------------------------------------+

+-- Thread 6 config ------------------------+
| Run on CPU:            7                  |
| Use cache:             yes                |
| Multi-hash:            no                 |
| Assembly module:       bulldozer          |
+-------------------------------------------+

Cryptonight Variation: Cryptolight-uPlexa fork of Dec-2018

Low intensity.

Starting CPU Thread 0, affinity: CPU 1
Thread 0 successfully bound to CPU 1
Allocated shared Large Page at: 00000225f2a00000
Allocated 2MB Cached Large Page Scratchpad Buffer for CPU 1 of NUMA node 0 at: 00000225f2c00000

Starting CPU Thread 1, affinity: CPU 2
Thread 1 successfully bound to CPU 2
Reuse part of 2MB Cached Large Page Scratchpad Buffer at: 00000225f2d00000

Starting CPU Thread 2, affinity: CPU 3
Thread 2 successfully bound to CPU 3
Failed to allocate 2MB Large Page Scratchpad Buffer, using normal memory (slower).

Starting CPU Thread 3, affinity: CPU 4
Thread 3 successfully bound to CPU 4
Failed to allocate 2MB Large Page Scratchpad Buffer, using normal memory (slower).

Starting CPU Thread 4, affinity: CPU 5
Thread 4 successfully bound to CPU 5
Failed to allocate 2MB Large Page Scratchpad Buffer, using normal memory (slower).

Starting CPU Thread 5, affinity: CPU 6
Thread 5 successfully bound to CPU 6
Failed to allocate 2MB Large Page Scratchpad Buffer, using normal memory (slower).

Starting CPU Thread 6, affinity: CPU 7
Thread 6 successfully bound to CPU 7
Failed to allocate 2MB Large Page Scratchpad Buffer, using normal memory (slower).
Devfee for CPU is 1.5%

04:07:27 | Uplexa (UPX) Mining session starts!

Hey JCE!

I`m mining with your CPU miner about 5 months. I got 2 AMD FX 8350. Picked v8 forks, as cryptonight heavy looks bad for my cpus.
I`m getting about 300-330h/s on 7 cores(keeping 1 core for GPUs). Do you think it`s better to switch CPUs on light or some other algo for better efficiency?

Thanks!

Does your fee include TX fee of the network?

Hello! How it`s going with monero v8-9 fork  with AMD fx-8350?

I`m doing 340-370h/s with criptonight v7 with 2.4.7 version, but with current 2.5.1 I`m getting error with a same configs. Here is an error screen http://prntscr.com/l7r0xx

Here is my cpu.txt config, using only 7 cores from 8. GPU mining turned off.

"cpu_threads_conf" :
[
{ "low_power_mode" : false, "no_prefetch" : false, "affine_to_cpu" : 0 },
{ "low_power_mode" : false, "no_prefetch" : false, "affine_to_cpu" : 1 },
{ "low_power_mode" : false, "no_prefetch" : false, "affine_to_cpu" : 2 },
{ "low_power_mode" : false, "no_prefetch" : false, "affine_to_cpu" : 3 },
{ "low_power_mode" : false, "no_prefetch" : false, "affine_to_cpu" : 4 },
{ "low_power_mode" : false, "no_prefetch" : false, "affine_to_cpu" : 5 },
{ "low_power_mode" : false, "no_prefetch" : false, "affine_to_cpu" : 6 },

],


It was working well at all previous algos.

 Also I have issue mining with AMD GPUs rx470/570 with this version. It shows me a same error with thread 0 config even if cpu mining turned off.

Any help?

@tytanick

Is it still support R9 280 cards? It was working great about a year, but 3 hours ago it looks like my power got down and when I come back rig can`t start. I see it`s offline in rig list. When attaching monitor it stuck at loading and saying something about SPA drive.

What should I check? WHat kind of OS should I load/update? I remember year ago there was a different image from RX and R9 series and now it`s only RX.

 Thanks!

Not working with gtx 970 4g and 1060 3g win10.
ERROR: Stratum authorization error
ERROR: CUDA driver version is insufficient for CUDA runtime version

Any chance to make it working?

Nevermind! With a last nvidia driver it`s working with gtx 970 8-10sol. Thik will work with 1060 as well, because a same driver.

Thanks a lot!

Claymore Dual 11.6 not working with R9 280 cards for mining ubiq.

11.5 did well. With 11.6 I`m stack with "see console" without able to see it. Same miner setup as for 11.5.

So I managed to connect to fairpool.
Some stats. For GPUs used claymore 11.2 and 11.3. For CPUs  xmr-stak

rig 7x 470 - highest reported by pool 5Khash, but mostly shows 2-3K. Claymore report 5555 hashs.
rig 3x570+480 - highest reported by pool 2Khash. Claymore report 3060 hashs.
rig 4xR9 280 - Claymore report 2150 hashs.

2x AMD FX8350 30-800 each. Miner reports 200-390 hash.

In total all these together reports 4-8K hashes by fairpool. And should be closer to 10-11K if follow miners reports.

Pretty strange.

Profits is a joke if fairpool calculation correct. Could get much more before the fork.

http://prntscr.com/j12jx3

Hello! Any alive pools?
https://pool.sumokoin.com are banning my IP or I get shares rejected.
xmr-stak for CPU mining just say my IP banned
xmr-stak for AMD says I`m rejected shares(low diff), but I`m using 5555 port for hi-end hardware(7x470).

Thank you! Looks interesting. Will test it later. But for now I want to get why it start crashing with ENT. Could be it the pool problem or network?

Hey folks!
I`m using 2x AMD FX8350 to mine ETN with xmr-stak cpu. It was fine a few months ago. Switched to mine sumokoin then and now I back to ETN mining. But my miner keep closing at 1st rig and closing with fatal error on 2nd rig. It can crash in 1 or 5 hours, but it crash at same time on both rigs and this rigs stays in a different cities. Claymore keeps mining eth without problem. And when I mine sumokoin with a same miner and setups(7 of 8 cores) it`s doing fine. Using easyhash.io pool. Any ideas why it`s crashing?

Mount Weather, I sent message with wishing good luck if you doing a real project, but I didn`t even see this message, because I was kicked from your discord channel. If you didn`t kick me, then some one else kicked me.

So you have 2 devs, one of them a founder stated at your site as a businessman/trader/miner and a manager. So he have time for everything. Which mean he have no time for real developing. In addition he spending a lot of time in discord. Just to prove my point he is not developing atm and probably in the future. 

To everything else it`s just a shit talking. Ppls have to believe you, while I showed the facts and shady moves in this project. Honestly, every smart person should stay away from premined projects these days. Don`t want to spend more time for this scam.

This post just to worn you about a scam project detected. But do your own research if you don`t want to loose your money or mining time.

Just to be clear I`m from a zencash community. I decide to check what is zelcash and why it looks like a copypast from zencach(ffs they only changed 1 sign in the name).

So I started from zel site.  Nothing better with a site - looks like a copy of https://zensystem.io/ A pretty same design, same fonts and even their logo looks a same(at least for me) - 3 attached cubic elements.

Then I looked at technology. And again a same things - private messages, masternodes and finally something original in whole project - crosschain. No real names in team, only nicknames. Good way to hide when you plagiarism something. And of course great for exit scam.

Entered to their discord. Started with simple question "Why it`s called zelcash and is there any hidden message behind it". Got funny kiddish answers from a founder and co-founder "because we like it" and "it easy to pronounce". Zero imagination.

Then asked what the difference with zencash. Got answer about a crosschain and this
 This info is not a true(same as info about zcash funding they`re spreading). Because ZEN doesn't actually have 8.5% in treasury. We forked off ZCL so first million coins and some more weren't taxed at all. Furthermore in % to total supply we have even way less; whereas premined coins get % of total supply. 1 761 000 * 0.085 = 149 685 / 21 000 000 = 0.7% of total supply

Then I saw info about zel have premine 6.2%. It`s not like zcash or zencash getting slow funding over time making devs to work hard all the time to push project forward. In zel case they will be able to cashout pretty fast when they`ll get a decent price after getting some exchanges.

So after all this info I called them a scam project and was kicked/banned from the discord. And as was mentioned at this thread before a founder/co-founder clearing/changing their messages all the time. Pretty shady moves.

And they have only one developer. So he must be better then Vitalik is to do all this stuff they imagine in whitepaper. Keep in mind they have nothing ready outside wallets(that was copied from zcash/zencash). Zcash/zencash have a pretty big teams working on projects and it`s moving slowly because developing takes a lot of time and testing things.

To summ this up.

1. A clone looking project to https://zensystem.io/
-changed only 1 sign in a project name
-a same site design
-a close looking logo
-a same ideas

2. Premine 6.2% to not wait long/get rich fast.

3. No real names for founders and dev teams. No penalties/law issue after exit a scam.

4. Only 1 developer.

5. Spreading incorrect info about zcash/zencash funding to look better.

6. Shady moves in discord - deleting/changing messages, kicking/banning ppls.

7. 210M coins supply.

I`m pretty sure there will be other issues. It`s up to you to risk or not. But giving them a hashpower or buying their shitcoins you will keep supporting crypto scams making your and humanity future unclear. Cheers to all a real projects!

Auto restarting the miner will be most efficient update!!! Maybe adding an option in bat file/config will be better then default option.

In general it`s doing 5-8% more hashrate(reported by the miner) at gtx 1060 3G(mixed brands) and gtx 970 4G. Plus it doing better power efficiency(about 5-8%) and cards stay cooler with a same or better hashrate. 
For 1060 3G 295-320 sol/s(core +100/+125Mhz and mem +200/+950Mhz).
For 970 4G 280-300 sol/s (core +125/+150Mhz)


P.S.: Great work! Keep it up!

I was asking about Storm Play mentioned in Weekly update in youtube, but did`nt got answer at your channel. So can you explain me how to get any zencash from Strom or at least try it. Wasn`t lucky to join Storm ICO also
Thank you! Great project and keep it rocking!

Thanks! I`m from Ukraine. I didn`t found my country in their ban list that`s why I`m wondering. Don`t see any other requirements for ICO.

Hey Stormtoken!

I tried twice to register to crowdsale, but failed. I can`t understand why I was canceled. I use myetherwallet with some eth, loaded legit passport photo and my selfie with passport, and other info.

Is there any country bans or what?

Can I still buy some tokens at nov.7?

Thank you.

Nevermind, I just found at github this

Hi,I think there is an issue with the blockchain db. Please delete folder C:\ProgramData\sumokoin and restart the wallet.Hope this would help.Regards,Bill Aue---- On Mon, 11 Sep 2017 03:47:59 +0700  Alejandur<notifications@github.com> wrote ----Hello, I created a wallet with SumoGUIWallet without problems. Now, when I start the GUIWallet, it remains "Waiting for network synchronization" but at the bottom of the screen I can read the following message in red "Network: Disconnected 0/47476 (0%)". What can I do to synchronize the wallet? Regards!  —You are receiving this because you are subscribed to this thread.Reply to this email directly, view it on GitHub, or mute the thread.