This will be awesome for my miner  , thanks in advance Patrike, meanwhile is there any command or c#script action that could i use?

Hi Patrike,

I have created 2 rules for my managed miner

1 each day at 11pm run managed template (to change to a custom miner and custom pool only comand line, no api)
2 each day at 8 am return again to managed miner, but the only way to make it work again is stopping the miner and manually (contextual menu "convert to managed miner")

Is there any other way to by time trigger switching between managed tamplate and managed miner profile?

Thanks

Hi, there will be an express delivery option for the cards? i have had bad experiences before with regular deliveries, it takes almost 6 monts, in my country, if delivery succesfull; thanks

Hi, mining-dutch.nl is also reporting excessive daily profit in nist5 algo

stratum+tcp://myrgro.mining-dutch.nl:9986, d=21
stratum+tcp://qubit.mining-dutch.nl:6662, d=15
stratum+tcp://skein.mining-dutch.nl:9998, d=15

For me working very well

Me... in Mining-dutch you have to stay for long, to see real profit, currently, the best option is myr-gr; I have set the diff at 21; d=21, best results for me, about 12 to 16 per day

Better you should keeping away mining-dutch, stats of this pool are very inacurate, especially for Skein, Qubit, Quark, and Myr-gr; way lower than expected, have tested too with scrypt, same bad results

Hi soothaa, thaks for your wonderfull work!!

I have some questions for you, if the plug in, have to be running all time 24/7 couldn´t be a good idea, to create a rule on AM to run the plug in? or, for check every n time if plug in is running/online?

Could you please help me with this rule creation?

Thanks in advance

Second this!!

Hi Patrike

I would like to ask you, Is there any way to create an additional rule, time based  (5 min for example) that searches within daily profit panel window (USD, EUR, BTC.. whatever were specified) and based in some kind of expected percent or threshold, triggers profit switching?

For example if daily profit estimated value, goes under 20USD (what ever we want to specify) activate profit switching and change to most profitable at the moment, if there is any

Thanks

I have good experience with AM (AntMiners, RIGS, Baikal, X10) But english is not my native language, i am spanish speaker, my english is poor, i have helped some people with the configuration of AM, via TeamViewer, I could help you if you want, obviously all by your sight, each TeamViewer movement, or configuration, you could be able to verify in real time, however... I recommend a threshold of 20 and for profit switching time not less than 30 min an max 3 pools for profit

Yes you can, set a coin, and a profit profile with baikal supported algos; if pools are not supported by AM, you have to asign a coin to use profit switch, otherwise, you will never see any mining reported value, to take in count to conditioned profit switch

Mmmm gonna try!

My X10, was failing like carnival shotgun, i had to dissamble it, and have noticed that the Orange Pi, wasn´t well attached to the hashing boards, i have pushed a little harder, and it finally fits totally, not any fail, 2 days after. hope it helps

Hello Patrike.

Is there any possibility to include Mining-Dutch.nl pool, in managed profit switching?

Same here

Awesome Miner is capable to switch between pools based in profitability at the moment, reboot AntMiners based in time, or HW errors, or Low hashrate, set default pools and more, just set privileged api and its done

What could be the relaton betwen Chip temp/wattage?

October batch at 537 Mhz default, before flashing your mod i have lowered my 3 D3 to 500 Mhz because had a lot of HW, indeed, flashing and tweaking with your mod, i haven't be able to correct the HW. Furthermore, the lowest temp of the chips i have had,  is 87-89º at 28º ambient, mine are too hot, i wil take a pic of the ammeter tomorrow, is the one of a clamp to test by cable, i have Bitmain's PSU in each one, at 220v, please a little patience with my poor english, thanks

Hi Blissz, could you please explain me why when running a D3 with your mod, at 220v triphase (500 Mhz in both cases, at 10th level Volt global) I get more AMP consumption (mesured with ammeter)

Your mod gives 5 AMP at 500Mhz, level 10 global
Default Bitmain's 4.6 AMP at 500MHZ

As far as i have read, A= W/V, so W=A*V? then, in my particular case, consumption should be higer with your mod or am i wrong?

I have flashed the mod in 1 AntD3, but after testing with an Ammeter i have noticed that AMPs has increased:

- Original's Bitmain Firmware: 4.6 AMP |  3 PCB 500MHz

- Blissz moded Firmware: 5.0 AMP | 3 PCB 500Mhz | set at 8 (Voltage)

Isn't it related a higher AMP to a higer power consumption?