The  new  version  is  finally  ready.  You  can  download  PhoenixMiner  5.8c  from  here:

PhoenixMiner_5.8c_Windows.zip Github
PhoenixMiner_5.8c_Linux.tar.gz Github


Changes in version 5.8c :

• Full LHR disable mode -lhrdis <n>  1 - yes (default), 0 - no
• Added lock core clock
• Fixed an issue causing crashing with some RTX 3060/3080/3090 cards
• Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will
  provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused
• Increased the maximum supported DAG epoch to 600 (i.e. until about Sep 2023)
• Implemented full hardware control for AMD RX6900/6800/6700 cards under Linux. Note that with these cards under Linux you need to specify relative core voltage: e.g. -
  cclock -50 will set the core voltage to be 50 mV under the default value
• Added ROCr kernels for Vega, Radeon VII and Navi cards. With these kernels you will be able to run these cards with Linux drivers 20.45 and later but the performance will
  be lower than with the older PAL drivers and kernels. We recommend using AMD Linux driver 20.30 for all cards except RX6900/6800/6700
• Fixed an issue causing crashing with some RX6900/6800/6700 cards under Linux (there is no need to run these cards with -clkernel 0 anymore)
• Added support for AMD Windows drivers up to 21.8.1. Note that Radeon VII cards will not work with drivers 21.6.1 or higher - you need to use older drivers for proper
  operation of these cards
• Added support for AMD Linux drivers up to 21.20 (use older drivers for Vega or Radeon VII cards as they will not work with 21.20). Note that the latest 21.30 drivers are
  not supported (and the initial testing shows that even the older Polars cards are not working properly with them, so avoid 21.30 for now)
• Numerous other fixes and small improvements

Please let us know if you have any problems or questions related to PhoenixMiner 5.8c

your now scammer stop paying for all

SCAM >>> ( weheartbitcoin.com )

So I have been using urlcash.me for several months now, I've just been experimenting with my website ()  and I have come to the conclusion that URL Shortening IS indeed profitable, with the platform that is provided, I've been able to make a steady income for some time now.
I personally recommend URL Cash because of the tools that they provide to make my site as profitable as possible and also were great when I used to own a faucet (PM me if you want to collaborate and make one again!). If you also need some additional guidance on how to use the platform, make sure to PM me!

Minimum Withdrawal Amount
PayPal   $5.00
Bitcoin   $5.00
FaucetHub (BTC)   $1.00
Flexy DZ   $1.00

اوافقك الراى فعلا كلو وهم وكذب واحتيال لابد من الصبر على ما هو لديك

مقترح جيد وصائب فعلا

انا مش عارف اقول ايه

انا اتفق تماما معك