The new beta version is ready. It is mostly a bugfix release, the more significant upgrades are coming next month. You can download PhoenixMiner 6.0a from here:

PhoenixMiner_6.0a_Windows.zip
PhoenixMiner_6.0a_Linux.tar.gz

The new features in this release are:

• Full LHR disable mode -lhrdis <n>  1 - yes (default), 0 - no
• Show the GPU vendor name in the list of GPUs to make it easier to identify the GPUs
• Added support for the latest AMD Linux drivers 21.40.1. There are some bugs in these drivers, particularly the clocks and voltages can't be set properly with older
  cards (RX4x0/RX5x0/Vega/RadeonVII)
• Validated support for the latest AMD Windows drivers up to 21.11.2
• Fixed issues with AMD RX6700XT cards with the latest AMD and Linux drivers
• Fixed issues with AMD Vega and Radeon VII cards on latest Windows and Linux drivers
• Fixed crash with very old Nvidia drivers (3xx.x)
• Other fixes and small improvements

The updated list of known issues (driver incompatibilities, etc.) and workarounds:
AMD Linux driver 21.40.1 has a bug preventing proper setting of clocks and voltages on older cards (RX4x0/RX5x0/Vega/RadeonVII). Given that these drivers are also
usually slower than the older drivers for these cards, we recommend using Linux drivers 20.30 for anything older than RX6000 series.
If you are using Linux drivers 21.40.1 with Radeon VII cards, you need to add the option -fpwm 1 in order to have proper fan control.
AMD Linux drivers 21.40.1 has finally removed the requirement of PCIe atomics but there are problems when you try to mix Polaris (RX4x0/5x0) cards and Vega or newer
cards on the same rig.
Some Nvidia cards will report a lot of stale shares under Windows 11. Using the same driver version under Windows 10 resolves the issue.

Hello, my herp is 532,529.6888275245
how much is that in satoshi? and how long do I need to reach a payout que/5460 satoshi?

I'm mining now at avg 27Gh/s

Believe me @sidehack, I did search to avoid such answer.

Now even after buying a good powered hub the 2pac keeps going OFF even after few days of running perfectly, with 2 fans directed on the single 2pac being used, I did try all sides of the voltage knob and yet I still get OFF issue!
Isn't there a more illustrated graphical guide to setting the correct voltage?

Or how do I detect the current-voltage needed for the 250Mhz or 150Mhz?

is there a way to revive the 2Pac in OFF mode without removing and putting it back?

Hello, I've been mining for the past few days now, but I do not see any progress on how much I'm making or any payouts anywhere on the status page? any advice?

OK, let's see the end of this, if does actually work I will order more Stickminers and wait for better ones!

So what USB Hub do you suggest?

I did adjust the voltage, even the Mac given error saying the USB device is drawing too much power, then after several adjustments the Stickminer a longer stable and no Mac USB Error.. but doesn't stay much and all of the sudden shows OFFSegment Fault: 11

is this a heat issue or am I doing something wrong?

After Unplug reset, the device is back to normal at 150MHz but again stops within 20-30 minutes of work showing it's active but disabled..
How do I adjust the pot meter?

I did unplug and power cycled the machine, still the same.

Which jack is overloaded, the Stickminer's or the Mac Pro itself?

After "brew reinstall cgminer" the Stick is showing with "OFF" (as in  OFF = Needs some physical attention.  Previously reported ZOMBIE state.)
What's meant by physical attention? Is it voltage up?

Note that it's directly plugged into Mac Pro which able to give up to 1.1 Amps.
Your help is much appreciated.

Turn up the voltage through the screw on the side?

And where do I request a warranty repair?

Thanks for the reply, it's listed but as inactive, it was running at 150 Mhz with cooling fan on it.. as shown in the screenshot

https://imgur.com/a/8aeO0

All of the sudden the is inactive, although it's listed as shown in the attached, how do I fix this?

https://imgur.com/a/8aeO0

I got the 2pac running on Mac Pro, usually, when it goes ZOMBIE I replug it and it's fine, but now it's absolutely not detected, any advice?

Any GI for monitoring?

Just got the stick, running cgminer v 4.4.3 on a Mac Pro Drum, but it doesn't pass the 1.5 Gh/s, is that normal?