The  new  version  is  finally  ready.  You  can  download  PhoenixMiner  5.8a  from  here:

PhoenixMiner_5.8a_Windows.zip
PhoenixMiner_5.8a_Linux.tar.gz


Changes in version 5.8a :

• LHR disable mode -lhrdis <n>  1 - yes (default), 0 - no
• Added lock core clock
• Fixed an issue causing crashing with some RTX 3060/3080/3090 cards
• Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will
  provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused
• Increased the maximum supported DAG epoch to 600 (i.e. until about Sep 2023)
• Implemented full hardware control for AMD RX6900/6800/6700 cards under Linux. Note that with these cards under Linux you need to specify relative core voltage: e.g. -
  cclock -50 will set the core voltage to be 50 mV under the default value
• Added ROCr kernels for Vega, Radeon VII and Navi cards. With these kernels you will be able to run these cards with Linux drivers 20.45 and later but the performance will
  be lower than with the older PAL drivers and kernels. We recommend using AMD Linux driver 20.30 for all cards except RX6900/6800/6700
• Fixed an issue causing crashing with some RX6900/6800/6700 cards under Linux (there is no need to run these cards with -clkernel 0 anymore)
• Added support for AMD Windows drivers up to 21.8.1. Note that Radeon VII cards will not work with drivers 21.6.1 or higher - you need to use older drivers for proper
  operation of these cards
• Added support for AMD Linux drivers up to 21.20 (use older drivers for Vega or Radeon VII cards as they will not work with 21.20). Note that the latest 21.30 drivers are
  not supported (and the initial testing shows that even the older Polars cards are not working properly with them, so avoid 21.30 for now)
• Numerous other fixes and small improvements

Please let us know if you have any problems or questions related to PhoenixMiner 5.8a

سلام دوستان
کسی تو سایت olymp trade کار کرده؟
مطمئن هست سایتش ؟

in other sites you can see about 20 or 30 rolls in your history but in this sit its just 10
 as i said befor if previous page was accessible , its just the same of this page
and it dont have anything to luck, i played about 2 years in many sites
i never seen such thing before
poker site have some places that they check their card generator program and give score to them to show people how much that program is near the reality in giving cards to people
this gambling sites need such thing
this provable fair isnt important thing and dont do this job

this sites are just waste of time
tnx for sharing good sites

http://uupload.ir/files/z345_snag-0007.jpg

i never sen such numbers in any site
unfortunately i cant take pictures from previous page but thats just the same
i wonder how could it be? with 80% win chance this looses are mean one thing: cheating
i think freebitco .in and freedogeco .in are worst hi lo game but this site surpass them
dont be fool by provable fair
if you like your money and your time dont play in this sites:

freebitco
freedogeco
allcoins.pw

you are absolutely right
the program that makes number is smart and create numbers on porpoise
for example when it says your win chance is 70 % when you bet low amount this win chance was right but when you raise your bets and make big bets ,
this smart program begin to cheat
then you can see in 1000 rolls you must win about 700 roll on 70% but you win only about 400 rolls
i try it many times and result was the same
then they show you provable fair link to see and check this number was realy yours and site dont change it , we know this number was realy but problem is that program that make numbers there must be some organization they check this programs like poker sites and give score to programs
this provable fair dont protect players right   

 its the same for freedogeco.in