Search content
Sort by
Showing 20 of 89 results by alrami
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
@miningpoolhub
I`m unable to cash out my coins.
amont and address fieds are gray. (any coin type)
what`s a reason?
thank you.
I`m unable to cash out my coins.
amont and address fieds are gray. (any coin type)
what`s a reason?
thank you.
Did you look on the left side under auto payout? That is where you enter the address and it will populate the right side after you save it. If you want to always manually cash out leave auto payment amount at zero.
thank you!
it`s a thin, i`m forgot about!
I'm not sure, but it can be due to old MOBO BIOS.
My old MOBO started with G1840 only after i'm change BIOS to a new version.
Also look at manual to be sure that DIMM 1 slot is really the #1
My old MOBO started with G1840 only after i'm change BIOS to a new version.
Also look at manual to be sure that DIMM 1 slot is really the #1
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.4 (Windows/Linux)
@Claymore
Win7x64, dual V. 9.3
gtx980 + 3xgtx1070
i'm able to use any 2 cards
it i'm try to mine with 3 cards, i'm see error like: "CUDA error. can't allocate large buffer"
virtual memory 16-32-64 = same problem
may be you can tell me how to resolve it
Thanks
try bigger RAM ( sometimes )Win7x64, dual V. 9.3
gtx980 + 3xgtx1070
i'm able to use any 2 cards
it i'm try to mine with 3 cards, i'm see error like: "CUDA error. can't allocate large buffer"
virtual memory 16-32-64 = same problem
may be you can tell me how to resolve it
Thanks
It's already 8Gb
think it must be 12-16Gb?
Thanks, i will try even system report about only 22% memory usage
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.4 (Windows/Linux)
@Claymore
Win7x64, dual V. 9.3
gtx980 + 3xgtx1070
i'm able to use any 2 cards
it i'm try to mine with 3 cards, i'm see error like: "CUDA error. can't allocate large buffer"
virtual memory 16-32-64 = same problem
may be you can tell me how to resolve it
Thanks
Win7x64, dual V. 9.3
gtx980 + 3xgtx1070
i'm able to use any 2 cards
it i'm try to mine with 3 cards, i'm see error like: "CUDA error. can't allocate large buffer"
virtual memory 16-32-64 = same problem
may be you can tell me how to resolve it
Thanks
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.4 (Windows/Linux)
Whats about "dual" mining on Nvidia and AMD cards at the same time? Is it possible?
And if anyone have GTX980, how much mh/s it has?
And if anyone have GTX980, how much mh/s it has?
MSI GTX980 Gaming = 22-23 at a stock bios
in most other algos gtx980 is near (+/-) to gtx1060 6G (except power usage, of case, he-he)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.4 (Windows/Linux)
New with RX480 cards...need some info/help.
I tried to mod rom, copied 1750 strap to 2000 strap. After reset I got the yellow exclamation on the card...so I must disable driver signature.
Is this the correct way to do it:
Card is XFX RX480 GTR 8GB, Samsung memory ( http://www.xfxforce.com/en-us/products/amd-radeon-rx-400-series/rx-480-gtr-8gb-dd-led-rx-480p8dfa6 )
I'm using WIN10 Pro X64 & latest AMD driver
Maybe someone wants to share already moded .rom for this card?
Thanks, cheers y'all
I tried to mod rom, copied 1750 strap to 2000 strap. After reset I got the yellow exclamation on the card...so I must disable driver signature.
Is this the correct way to do it:
Code:
bcdedit.exe /set nointegritychecks on
or:Code:
bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit.exe -set TESTSIGNING ON
bcdedit.exe -set TESTSIGNING ON
Card is XFX RX480 GTR 8GB, Samsung memory ( http://www.xfxforce.com/en-us/products/amd-radeon-rx-400-series/rx-480-gtr-8gb-dd-led-rx-480p8dfa6 )
I'm using WIN10 Pro X64 & latest AMD driver
Maybe someone wants to share already moded .rom for this card?
Thanks, cheers y'all
Try older drivers
16.11.5 works fine
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.4 (Windows/Linux)
Good time for all
What swap must be set for 1070 cards?
i have 4 card rig 980 + 3x1070
Dual miner can work with any 2 cards from a rig
if more, i see a mistake like "CUDA error, can't allocate big bufer for DAG"
Win7x64 Claymore 9.3
swap 16-32-64 = same
What swap must be set for 1070 cards?
i have 4 card rig 980 + 3x1070
Dual miner can work with any 2 cards from a rig
if more, i see a mistake like "CUDA error, can't allocate big bufer for DAG"
Win7x64 Claymore 9.3
swap 16-32-64 = same
dont know . can i use any one regarding this model 11260-01-20G ?
Try a BIOS from a following link: https://www.techpowerup.com/vgabios/185322/sapphire-rx480-8192-160713
Hi
i don't neet to setup from zero...
only a few problem
the most important it help with Bios on my GPU
thanks
i don't neet to setup from zero...
only a few problem
the most important it help with Bios on my GPU
thanks
Try to look Bios at: https://anorak.tech/t/anoraks-vbios-collection-optimized-settings-for-performance-power-saving/13
There you also can find Bios Editor and how to Flash your cards
but pls take in a mind that new AMD drivers don't recognize flashed cards (can see only stock bios)
so u will need old drivers, but think it will be no problem for EthOS, (ask support)
Re: What's the recommended PSU wattage per rx 480 in a GPU rig?
Just to be safe I would use 200W for each card (spikes..)
Think even 250W must be for a safety, case i saw up to 224W spikes in GPU-Z
You go for ubuntu my man. It's the best for your use
What you think about Linux Mint?
Looks it based on Ubuntu.
I use this: CHIEFTEC A80 750W PSU.
One card consumes 120w.
One card consumes 120w.
Check not average, but MAX power spending
You will be surprised when you will see 250W
Re: NiceHash EQM Zcash NVIDIA optimized miner [Maxwell/Pascal] + CPU mining v1.0.2d
I got 155 sols/s with Nvidia GTX 980 ref card / win 10 64bit / nvidia driver 375.63 and the latest Nicehash Miner v1.0.2d
Power draw at the wall 180 watts for the whole system.
Trying get cpu (i7-5960x) mining working on the same pc , i got a error , for each core : "Unable to alloc locked pages (err=1314)" , but hashing speed increasing with 30-35 sols/s using 8 cores... power draw at the wall going up to 258 watts / us 120volt
Power draw at the wall 180 watts for the whole system.
Trying get cpu (i7-5960x) mining working on the same pc , i got a error , for each core : "Unable to alloc locked pages (err=1314)" , but hashing speed increasing with 30-35 sols/s using 8 cores... power draw at the wall going up to 258 watts / us 120volt
So-so, but not bad for GTX 980
As for CPU, you got your 35 Sol/s
Error message: It's common issue, all, trying to use CPU, see it. But it's like just a message, no real problems follows. So Relax and Forgot. ;-)
I have built a good number of these, but I have one brand new board I can't get to even boot to the setup screen.
When I start it up the PSU stutters twice then on the third go it runs. CPU fan turns, I hear the HD click, but no lights on internet connection, not video.
I just pulled the PSU off a working rig so it's good.
I have changed out the memory and currently have just one stick in.
Unplugged keyboard and mouse.
Reconnected CPU power.
Have tried onboard video and GPU's, but I can't get a light on the board at all so I don't think that matters. Currently no GPU's connected, just onboard chipset.
Monitor, PSU and memory are all off a Z77 Extreme 6 I was using and I just wanted to replace the MB. Brand new cpu. But I did take it out and examined all the pins. Reseated it. Appears fine.
Been through this already :
http://www.tomshardware.com/faq/id-1893016/post-system-boot-video-output-troubleshooting-checklist.html
Any suggestions - bad board?
EDIT - only message on the monitor is "HDMI in Power Saving mode"
When I start it up the PSU stutters twice then on the third go it runs. CPU fan turns, I hear the HD click, but no lights on internet connection, not video.
I just pulled the PSU off a working rig so it's good.
I have changed out the memory and currently have just one stick in.
Unplugged keyboard and mouse.
Reconnected CPU power.
Have tried onboard video and GPU's, but I can't get a light on the board at all so I don't think that matters. Currently no GPU's connected, just onboard chipset.
Monitor, PSU and memory are all off a Z77 Extreme 6 I was using and I just wanted to replace the MB. Brand new cpu. But I did take it out and examined all the pins. Reseated it. Appears fine.
Been through this already :
http://www.tomshardware.com/faq/id-1893016/post-system-boot-video-output-troubleshooting-checklist.html
Any suggestions - bad board?
EDIT - only message on the monitor is "HDMI in Power Saving mode"
Try to clear a MB BIOS. Once upon a time it helps me..
In another way better to change a MB, if it can be easily done.
edit: message - mean monitor see no signal
Hello 
I have 5 gpu rx480 with motherboard asrock btc.
I plugged 4 card on pci-1 with riser xsource (powered)
It works very well.
Waiting to receive my 5th riser, I wanted to connect my 5th gpu directly on the pci-16 of the motherboard.
But that if is not recognized by wattman or claymore.
You have an idea why my gpu is not detected?
thank you in advance
I have 5 gpu rx480 with motherboard asrock btc.
I plugged 4 card on pci-1 with riser xsource (powered)
It works very well.
Waiting to receive my 5th riser, I wanted to connect my 5th gpu directly on the pci-16 of the motherboard.
But that if is not recognized by wattman or claymore.
You have an idea why my gpu is not detected?
thank you in advance
At some Asrock MBs pci-e x16 must be connected with pci-e x16 raser, not with pci-e x1
it can be powered or not - no diff, a cheap one will be ok
edit:
you can check even without a riser - just put a GPU in PCI-E x16 directly
if problem will be solved, so - use x16 to x16 riser to connect
As i see, you forgot to disable CPU graphics!
Disable it in a BIOS
Also, if CPU graphics set to "Auto", so use x16-x16 riser in a first slot (meet same at my Asrock Anniversary)
I'm use the cheapest non-powered one case MB supports one card freely
P.S. Asrock noted that in multi GPU system user need to install first card in x16 slot and only than install other cards (may be not need, but i'm follow a note)