Search content
Sort by
Showing 20 of 41 results by amitim
Re: [ANN][POOL] ZERGPOOL.com - Multialgo, autoexchange, 0.5% fee, 250+ coins
WTF???
the pool stopped showing mining on algorithm 144. The miner shows confirmed share, but nothing comes to the balance on the pool:
Two or three days ago, the SAFE coin abruptly disappeared from mining. The entire balance that was mined but has not yet been confirmed is gone.
what's happening?
the pool stopped showing mining on algorithm 144. The miner shows confirmed share, but nothing comes to the balance on the pool:
Code:
Type: NVIDIA
Type Miner Algorithm Coin Pool Speed mBTC/Day BTC/Day BTC/GH/Day
---- ----- --------- ---- ---- ----- -------- ------- ----------
NVIDIA miniZ Equihash144 LTZ zergpoolplus 62.86 H/s 0.127 0.000 2 013.65058
NVIDIA trex Mtp FIRO zergpoolplus 2.70 MH/s 0.098 0.000 0.03647
NVIDIA miniZ Equihash192 YEC zergpoolplus 36.53 H/s 0.076 0.000 2 074.40712
NVIDIA CryptoDredge CryptonightGpu XEQ zergpoolplus 1.60 KH/s 0.076 0.000 47.63322
Type Miner Algorithm Coin Pool Speed mBTC/Day BTC/Day BTC/GH/Day
---- ----- --------- ---- ---- ----- -------- ------- ----------
NVIDIA miniZ Equihash144 LTZ zergpoolplus 62.86 H/s 0.127 0.000 2 013.65058
NVIDIA trex Mtp FIRO zergpoolplus 2.70 MH/s 0.098 0.000 0.03647
NVIDIA miniZ Equihash192 YEC zergpoolplus 36.53 H/s 0.076 0.000 2 074.40712
NVIDIA CryptoDredge CryptonightGpu XEQ zergpoolplus 1.60 KH/s 0.076 0.000 47.63322
Code:
[ 0d 0h13m10s] 0>GTX 1070 Ti ` 100% [69°C/51%]*33.19 I/s 67.11(65.40)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 224ms
[ 0d 0h13m20s] 0>GTX 1070 Ti ` 100% [69°C/51%]*33.22 I/s 67.17(65.45)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 169ms
[ 0d 0h13m30s] 0>GTX 1070 Ti ` 100% [69°C/51%]*33.25 I/s 67.34(65.52)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 169ms
[ 0d 0h13m40s] 0>GTX 1070 Ti ` 100% [69°C/51%]*33.27 I/s 67.87(65.68)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 153ms
[ 0d 0h13m50s] 0>GTX 1070 Ti ` 100% [69°C/51%] 33.29 I/s 67.75(65.69)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 153ms
[ 0d 0h14m00s] 0>GTX 1070 Ti ` 100% [69°C/51%]*33.33 I/s 67.90(65.81)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 141ms
[ 0d 0h14m10s] 0>GTX 1070 Ti ` 100% [69°C/51%]*33.34 I/s 67.94(65.85)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 147ms
[ 0d 0h14m20s] 0>GTX 1070 Ti ` 100% [69°C/51%] 33.36 I/s 67.92(65.89)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 147ms
[ 0d 0h14m30s] 0>GTX 1070 Ti ` 100% [69°C/51%] 33.38 I/s 68.04(65.95)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 147ms
[ 0d 0h14m40s] 0>GTX 1070 Ti ` 100% [69°C/51%]*33.39 I/s 67.54(65.88)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 125ms
[ 0d 0h14m50s] 0>GTX 1070 Ti ` 100% [69°C/51%] 33.42 I/s 67.18(65.86)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=in
[ 0d 0h13m20s] 0>GTX 1070 Ti ` 100% [69°C/51%]*33.22 I/s 67.17(65.45)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 169ms
[ 0d 0h13m30s] 0>GTX 1070 Ti ` 100% [69°C/51%]*33.25 I/s 67.34(65.52)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 169ms
[ 0d 0h13m40s] 0>GTX 1070 Ti ` 100% [69°C/51%]*33.27 I/s 67.87(65.68)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 153ms
[ 0d 0h13m50s] 0>GTX 1070 Ti ` 100% [69°C/51%] 33.29 I/s 67.75(65.69)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 153ms
[ 0d 0h14m00s] 0>GTX 1070 Ti ` 100% [69°C/51%]*33.33 I/s 67.90(65.81)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 141ms
[ 0d 0h14m10s] 0>GTX 1070 Ti ` 100% [69°C/51%]*33.34 I/s 67.94(65.85)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 147ms
[ 0d 0h14m20s] 0>GTX 1070 Ti ` 100% [69°C/51%] 33.36 I/s 67.92(65.89)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 147ms
[ 0d 0h14m30s] 0>GTX 1070 Ti ` 100% [69°C/51%] 33.38 I/s 68.04(65.95)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 147ms
[ 0d 0h14m40s] 0>GTX 1070 Ti ` 100% [69°C/51%]*33.39 I/s 67.54(65.88)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=inf- 125ms
[ 0d 0h14m50s] 0>GTX 1070 Ti ` 100% [69°C/51%] 33.42 I/s 67.18(65.86)Sol/s 0( 0.0)W clk=1683MHz mclk=4004MHz Sol/W=in
Code:
Arrow Arrow (equihash192) 0 0.1831% 0.061 - -
GlobalBoost GlobalBoost (yescrypt) 0 0.0005% 0.0001 - -
Ravencoin Ravencoin (kawpow) 0 0.0134% 0.6706 - -
Ethereum Ethereum (ethash) 1 4.1727% 0.2191 15 Mh/s 7 months -
Lux Lux (rx2) 12 0% 0 - 9.1 kh/s 8 hours
Firo Firo (mtp) 1 1.9423% 0.1214 2.3 Mh/s 5 hours -
Total workers: 16
GlobalBoost GlobalBoost (yescrypt) 0 0.0005% 0.0001 - -
Ravencoin Ravencoin (kawpow) 0 0.0134% 0.6706 - -
Ethereum Ethereum (ethash) 1 4.1727% 0.2191 15 Mh/s 7 months -
Lux Lux (rx2) 12 0% 0 - 9.1 kh/s 8 hours
Firo Firo (mtp) 1 1.9423% 0.1214 2.3 Mh/s 5 hours -
Total workers: 16
Two or three days ago, the SAFE coin abruptly disappeared from mining. The entire balance that was mined but has not yet been confirmed is gone.
what's happening?
Re: [ANN][POOL] ZERGPOOL.com - Multialgo, autoexchange, 0.5% fee, 250+ coins
Hi! explain it to me. the miner (NPlusMiner 7.8.
automatically selects the most profitable algorithm on the pool. But if you look at the profitability of this algorithm and the coins on the site https://whattomine.com/, then this algorithm is not so profitable at this moment. How do I understand this?
https://ibb.co/vqXSBkX
https://ibb.co/yWxNF7v
automatically selects the most profitable algorithm on the pool. But if you look at the profitability of this algorithm and the coins on the site https://whattomine.com/, then this algorithm is not so profitable at this moment. How do I understand this?Code:
Type Miner Algorithm Coin Pool Speed mBTC/Day BTC/Day BTC/GH/Day
---- ----- --------- ---- ---- ----- -------- ------- ----------
NVIDIA NBMiner Kawpow RVN zergpoolplus 13.91 MH/s 0.077 0.000 0.00555
NVIDIA NBMinerEthash Ethash ETH zergpoolplus 26.97 MH/s 0.039 0.000 0.00144
NVIDIA miniZ Equihash192 YEC zergpoolplus 27.60 H/s 0.031 0.000 1 119.89964
---- ----- --------- ---- ---- ----- -------- ------- ----------
NVIDIA NBMiner Kawpow RVN zergpoolplus 13.91 MH/s 0.077 0.000 0.00555
NVIDIA NBMinerEthash Ethash ETH zergpoolplus 26.97 MH/s 0.039 0.000 0.00144
NVIDIA miniZ Equihash192 YEC zergpoolplus 27.60 H/s 0.031 0.000 1 119.89964
https://ibb.co/vqXSBkX
https://ibb.co/yWxNF7v
Re: BlockMasters.co 130+ Coins | Solo & Party l US | EU & AS stratum's
Do you have any updates about my problem with Yescrypt algo on EU servers? Earlier (may be about 1 or 2 month) it`s worked normally. On US servers mining with same config working fine.
Re: BlockMasters.co 130+ Coins | Solo & Party l US | EU & AS stratum's
Hi!
Does not receive data from eu.blockmasters.co. It works with US, but the pings are big. The Yescrypt Algorithm. Am I the only one with a problem?
Does not receive data from eu.blockmasters.co. It works with US, but the pings are big. The Yescrypt Algorithm. Am I the only one with a problem?
Code:
[2020-11-19 13:59:30] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-19 13:59:30] ...retry after 10 seconds
[2020-11-19 13:59:42] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-19 13:59:42] ...retry after 10 seconds
[2020-11-19 13:59:30] ...retry after 10 seconds
[2020-11-19 13:59:42] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-19 13:59:42] ...retry after 10 seconds
Having the same issue lately.
Code:
[2020-11-30 22:36:07] 2 miner threads started, using 'yescrypt' algorithm.
[2020-11-30 22:36:07] Starting Stratum on stratum+tcp://eu.blockmasters.co:6233
[2020-11-30 22:36:08] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:36:08] ...retry after 10 seconds
[2020-11-30 22:36:20] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:36:20] ...retry after 10 seconds
[2020-11-30 22:36:31] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:36:31] ...retry after 10 seconds
[2020-11-30 22:36:42] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:36:42] ...retry after 10 seconds
[2020-11-30 22:36:53] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:36:53] ...retry after 10 seconds
[2020-11-30 22:37:05] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:37:05] ...retry after 10 seconds
[2020-11-30 22:37:16] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:37:16] ...retry after 10 seconds
compiled by nemosminer@github.com
[2020-11-30 22:36:05] CPU priority: high
[2020-11-30 22:36:05] Starting Stratum on stratum+tcp://eu.blockmasters.co:6233
[2020-11-30 22:36:05] NVML GPU monitoring enabled.
[2020-11-30 22:36:05] NVAPI GPU monitoring enabled.
[2020-11-30 22:36:05] 1 miner thread started, using 'yescrypt' algorithm.
[2020-11-30 22:36:06] Stratum connect failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:36:06] ...retry after 1 seconds
[2020-11-30 22:36:08] GPU #0: waiting for data
[2020-11-30 22:36:09] Stratum connect failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:36:09] ...retry after 1 seconds
[2020-11-30 22:36:11] Stratum connect failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:36:11] ...retry after 1 seconds
[2020-11-30 22:36:11] GPU #0: waiting for data
[2020-11-30 22:36:13] Stratum connect failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:36:13] ...retry after 1 seconds
[2020-11-30 22:36:14] GPU #0: waiting for data
[2020-11-30 22:36:07] Starting Stratum on stratum+tcp://eu.blockmasters.co:6233
[2020-11-30 22:36:08] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:36:08] ...retry after 10 seconds
[2020-11-30 22:36:20] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:36:20] ...retry after 10 seconds
[2020-11-30 22:36:31] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:36:31] ...retry after 10 seconds
[2020-11-30 22:36:42] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:36:42] ...retry after 10 seconds
[2020-11-30 22:36:53] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:36:53] ...retry after 10 seconds
[2020-11-30 22:37:05] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:37:05] ...retry after 10 seconds
[2020-11-30 22:37:16] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:37:16] ...retry after 10 seconds
compiled by nemosminer@github.com
[2020-11-30 22:36:05] CPU priority: high
[2020-11-30 22:36:05] Starting Stratum on stratum+tcp://eu.blockmasters.co:6233
[2020-11-30 22:36:05] NVML GPU monitoring enabled.
[2020-11-30 22:36:05] NVAPI GPU monitoring enabled.
[2020-11-30 22:36:05] 1 miner thread started, using 'yescrypt' algorithm.
[2020-11-30 22:36:06] Stratum connect failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:36:06] ...retry after 1 seconds
[2020-11-30 22:36:08] GPU #0: waiting for data
[2020-11-30 22:36:09] Stratum connect failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:36:09] ...retry after 1 seconds
[2020-11-30 22:36:11] Stratum connect failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:36:11] ...retry after 1 seconds
[2020-11-30 22:36:11] GPU #0: waiting for data
[2020-11-30 22:36:13] Stratum connect failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-30 22:36:13] ...retry after 1 seconds
[2020-11-30 22:36:14] GPU #0: waiting for data
Re: BlockMasters.co 130+ Coins | Solo & Party l US | EU & AS stratum's
Hi!
Does not receive data from eu.blockmasters.co. It works with US, but the pings are big. The Yescrypt Algorithm. Am I the only one with a problem?
Does not receive data from eu.blockmasters.co. It works with US, but the pings are big. The Yescrypt Algorithm. Am I the only one with a problem?
Code:
[2020-11-19 13:59:30] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-19 13:59:30] ...retry after 10 seconds
[2020-11-19 13:59:42] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-19 13:59:42] ...retry after 10 seconds
[2020-11-19 13:59:30] ...retry after 10 seconds
[2020-11-19 13:59:42] Stratum connection failed: Failed to connect to eu.blockmasters.co port 6233: Connection refused
[2020-11-19 13:59:42] ...retry after 10 seconds
Re: NPlusMiner - | NVIDIA/CPU miner | Autoupdate | Auto Pool/Algo switching
Hi MrPlus!
Why for BCD in blockmasters.ps1 active this strings:
In this case for 1x1070 I have (currently)
I think this is a mistake.
These lines are active from old versions and I have to turn them off every time after update
Secondly: I have to manually correct line $HostSuffix = "blockmasters.co" to $HostSuffix = "eu.blockmasters.co" after each update. Is it possible to have this automatically?
WBR...
Why for BCD in blockmasters.ps1 active this strings:
Code:
switch ($PoolAlgorithm) {
"bcd" {$Divisor /= 10}
}#temp fix
"bcd" {$Divisor /= 10}
}#temp fix
In this case for 1x1070 I have (currently)
Code:
Miner Algorithm Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool
----- --------- ----- -------- ------- ------- ---------- ----
trex BCD 20,33 MH/s 0,975 0,00098 3,505 0,04798 blockmasters-
CryptoDredge BCD 18,55 MH/s 0,890 0,00089 3,199 0,04798 blockmasters-
trex X16R 17,48 MH/s 0,137 0,00014 0,492 0,00783 blockmasters-
trex X22i 10,66 MH/s 0,129 0,00013 0,463 0,01208 blockmasters-
CryptoDredge X16R 16,36 MH/s 0,128 0,00013 0,460 0,00783 blockmasters-
----- --------- ----- -------- ------- ------- ---------- ----
trex BCD 20,33 MH/s 0,975 0,00098 3,505 0,04798 blockmasters-
CryptoDredge BCD 18,55 MH/s 0,890 0,00089 3,199 0,04798 blockmasters-
trex X16R 17,48 MH/s 0,137 0,00014 0,492 0,00783 blockmasters-
trex X22i 10,66 MH/s 0,129 0,00013 0,463 0,01208 blockmasters-
CryptoDredge X16R 16,36 MH/s 0,128 0,00013 0,460 0,00783 blockmasters-
I think this is a mistake.
These lines are active from old versions and I have to turn them off every time after update
Secondly: I have to manually correct line $HostSuffix = "blockmasters.co" to $HostSuffix = "eu.blockmasters.co" after each update. Is it possible to have this automatically?
WBR...
Re: BlockMasters.co-210+ Coins. BTC,LTC,DOGE Payout! [1500+ Miners] BCD Now UP!
Today for BCD
It's normal for one GTX-1070?! On zpool I see less then $1. This picture same for all my workers. NemosMiner 3.5.2.
for 5 cards:
ЧЯДHT - what am I doing wrong?
UPD: NM 3.5.2 have wrong blokmasters.ps1. From 3.5.1 - OK
Code:
Type: NVIDIA
Miner Algorithm Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool
----- --------- ----- -------- ------- ------- ---------- ----
trex BCD 17,21 MH/s 1,322 0,00132 8,395 0,07681 blockmasters-
enemyzealotx32 BCD 15,63 MH/s 1,201 0,00120 7,628 0,07681 blockmasters-
trex SHA256t 616,49 MH/s 0,162 0,00016 1,031 0,00026 blockmasters-
ccminerTpruvot23 SHA256t 526,78 MH/s 0,139 0,00014 0,881 0,00026 blockmasters-
trex X22i 6,56 MH/s 0,136 0,00014 0,865 0,02077 blockmasters-
enemyzealotx64 X16R 15,05 MH/s 0,120 0,00012 0,761 0,00796 blockmasters-
trex X16R 14,66 MH/s 0,117 0,00012 0,741 0,00796 blockmasters-
enemyzealotx32 Hex 9,94 MH/s 0,099 0,00010 0,626 0,00992 blockmasters-
enemyzealotx32 X17 14,39 MH/s 0,095 0,00010 0,606 0,00663 blockmasters-
Zjazz-CUDA X22i 4,50 MH/s 0,094 0,00009 0,594 0,02077 blockmasters-
Miner Algorithm Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool
----- --------- ----- -------- ------- ------- ---------- ----
trex BCD 17,21 MH/s 1,322 0,00132 8,395 0,07681 blockmasters-
enemyzealotx32 BCD 15,63 MH/s 1,201 0,00120 7,628 0,07681 blockmasters-
trex SHA256t 616,49 MH/s 0,162 0,00016 1,031 0,00026 blockmasters-
ccminerTpruvot23 SHA256t 526,78 MH/s 0,139 0,00014 0,881 0,00026 blockmasters-
trex X22i 6,56 MH/s 0,136 0,00014 0,865 0,02077 blockmasters-
enemyzealotx64 X16R 15,05 MH/s 0,120 0,00012 0,761 0,00796 blockmasters-
trex X16R 14,66 MH/s 0,117 0,00012 0,741 0,00796 blockmasters-
enemyzealotx32 Hex 9,94 MH/s 0,099 0,00010 0,626 0,00992 blockmasters-
enemyzealotx32 X17 14,39 MH/s 0,095 0,00010 0,606 0,00663 blockmasters-
Zjazz-CUDA X22i 4,50 MH/s 0,094 0,00009 0,594 0,02077 blockmasters-
It's normal for one GTX-1070?! On zpool I see less then $1. This picture same for all my workers. NemosMiner 3.5.2.
for 5 cards:
Code:
Miner Algorithm Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool
----- --------- ----- -------- ------- ------- ---------- ----
trex BCD 93,81 MH/s 6,401 0,00640 40,620 0,06823 blockmasters-
enemyzealotx32 BCD 87,58 MH/s 5,975 0,00598 37,919 0,06823 blockmasters-
trex X22i 35,81 MH/s 0,710 0,00071 4,504 0,01982 blockmasters-
trex X16R 81,41 MH/s 0,644 0,00064 4,087 0,00791 blockmasters-
enemyzealotx64 X16R 76,11 MH/s 0,602 0,00060 3,821 0,00791 blockmasters-
CryptoDredge92 Lyra2z 18,53 MH/s 0,524 0,00052 3,328 0,02831 blockmasters-
----- --------- ----- -------- ------- ------- ---------- ----
trex BCD 93,81 MH/s 6,401 0,00640 40,620 0,06823 blockmasters-
enemyzealotx32 BCD 87,58 MH/s 5,975 0,00598 37,919 0,06823 blockmasters-
trex X22i 35,81 MH/s 0,710 0,00071 4,504 0,01982 blockmasters-
trex X16R 81,41 MH/s 0,644 0,00064 4,087 0,00791 blockmasters-
enemyzealotx64 X16R 76,11 MH/s 0,602 0,00060 3,821 0,00791 blockmasters-
CryptoDredge92 Lyra2z 18,53 MH/s 0,524 0,00052 3,328 0,02831 blockmasters-
ЧЯДHT - what am I doing wrong?
UPD: NM 3.5.2 have wrong blokmasters.ps1. From 3.5.1 - OK
профи тот, кто В ЛЮБОЙ ситуации (в нашем случае падает ли крипта, растет ли) старается и извлекает из этого пользу. А все инсинуации на предмет "ща попрет и я всё-таки в нули выйду...", "ща упадётЬ и я закуплюсЯ по самое небалуй, а пАтом возьму хахаля XXL..." - палата №6
Чтобы быть в профите нужно ЗНАТЬ основы и ИЗУЧАТЬ рынки. А не ванговать на "тритышшшы" страниц форума, причем не прочитав даже предыдущую страничку пред последней
"Лень читать весь терЭд, скажитЯ, пАдскажитЯ, чтобы вот сразу..."
Чтобы быть в профите нужно ЗНАТЬ основы и ИЗУЧАТЬ рынки. А не ванговать на "тритышшшы" страниц форума, причем не прочитав даже предыдущую страничку пред последней
"Лень читать весь терЭд, скажитЯ, пАдскажитЯ, чтобы вот сразу..."Похоже тенденция на запрет рекламы крипты набирает обороты.
А нужна эта реклама тому, кто копает (мне например)
Да и хрен с ней, с рекламой. Пусть вошкаются в своих запреторазрешениях. А я пока просто покопаю. Не напряжно так... в своё удовольствие. Так сказать без фанатизма. Ну и на качельках биржевых поиграю. Буду в плюсе - ой какой я молодец, так сказать аххх..й! Буду в минусе - во я лошара, так сказать еб....й!
В любом случае - САМ СЕБЕ ЗЛОБНЫЙ БУРАТИНКО! PS. развели тут ромашки, паимаишь....
Пpoшy пoмoчь в нacтpoйкe msi 1070 Armor*6 нacтpoйки в afterburner для nemosminer
Извинитe мoй pyccкий нe oчeнь xopoшo (heres тo, чтo я мoг cдeлaть, этo: ) «Cпpocить пoмoщь в нacтpoйкe msi 1070 бpoни * 6 пapaмeтpoв в фopcaжe для nemosminer «id пpeдлoжить для 1070 пapaмeтp влacти oгpaничить 70% / ядpo 75 MГц / пaмяти 505 MГц aнглийcкий пoжaлyйcтa в бyдyщeм
sorry my Russian is not very good (heres what i could make of that:) "Ask help in Customizing msi 1070 Armor * 6 settings in afterburner for nemosminer"
id suggest for 1070 setting power limit 70% / core + 75mhz / memory +505mhz
English please in future
Лyчшими пoжeлaниями Heмo
Best Regards Nemo
Nemo, excellent!!!
Very correct answer. Respect!
Hi minerx117
It would be absolutely cool feature if before launching the switched miner, the afterburner with the command line option for loading one of the five overclock profiles would start.
For example
"C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe" -Profile1
ccminer.exe -a -lyra2RE2 ...
or
"C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe" -Profile2
ccminer.exe -a -tribus ...
It would be a bomb...
It would be absolutely cool feature if before launching the switched miner, the afterburner with the command line option for loading one of the five overclock profiles would start.
For example
"C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe" -Profile1
ccminer.exe -a -lyra2RE2 ...
or
"C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe" -Profile2
ccminer.exe -a -tribus ...
It would be a bomb...
yip i'll get onto that will add to next version 2.3
best Regards
Nemo
WOW! it's very good news
Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™][SegWit] The miners multipool >-░▒▓█
Hi!
My cards:
1x1080
2x1070
Really? Or this is wrong benchmark?
My cards:
1x1080
Code:
Type: NVIDIA
Miner Algorithm Speed BTC/Day USD/Day BTC/GH/Day Pool
----- --------- ----- ------- ------- ---------- ----
CcminerTpruvotcuda9 Phi 26,11 MH/s 0,00059 7,419 0,02263 zpool-
ccminerAlexis78 Sib 15,92 MH/s 0,00048 6,055 0,03030 zpool-
CcminerTpruvot NeoScrypt 1,12 MH/s 0,00047 5,956 0,42361 zpool-
Miner Algorithm Speed BTC/Day USD/Day BTC/GH/Day Pool
----- --------- ----- ------- ------- ---------- ----
CcminerTpruvotcuda9 Phi 26,11 MH/s 0,00059 7,419 0,02263 zpool-
ccminerAlexis78 Sib 15,92 MH/s 0,00048 6,055 0,03030 zpool-
CcminerTpruvot NeoScrypt 1,12 MH/s 0,00047 5,956 0,42361 zpool-
2x1070
Code:
1BTC = 12555.92234809 USD
Type: NVIDIA
Miner Algorithm Speed BTC/Day USD/Day BTC/GH/Day Pool
----- --------- ----- ------- ------- ---------- ----
CcminerKlaust NeoScrypt 2,48 MH/s 0,00105 13,173 0,42361 zpool-
CcminerTpruvotcuda9 Phi 40,88 MH/s 0,00093 11,617 0,02263 zpool-
ccminerAlexis78 Sib 25,70 MH/s 0,00078 9,778 0,03030 zpool-
Type: NVIDIA
Miner Algorithm Speed BTC/Day USD/Day BTC/GH/Day Pool
----- --------- ----- ------- ------- ---------- ----
CcminerKlaust NeoScrypt 2,48 MH/s 0,00105 13,173 0,42361 zpool-
CcminerTpruvotcuda9 Phi 40,88 MH/s 0,00093 11,617 0,02263 zpool-
ccminerAlexis78 Sib 25,70 MH/s 0,00078 9,778 0,03030 zpool-
Really? Or this is wrong benchmark?
Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™][SegWit] The miners multipool >-░▒▓█
Hi!
I do not mining lyra2z algo, but on statistics i see
https://screenshots.firefoxusercontent.com/images/6f916a4f-19bf-47c2-a3f2-b0171984bf92.png
Why?
my wallet is 153jhJMkgCMt5X8hoyQg8MawegeCibaBnZ
I do not mining lyra2z algo, but on statistics i see
https://screenshots.firefoxusercontent.com/images/6f916a4f-19bf-47c2-a3f2-b0171984bf92.png
Why?
my wallet is 153jhJMkgCMt5X8hoyQg8MawegeCibaBnZ
NemosMiner-v2.2 Zpool / NiceHash / ahashpool / hashrefinery / MiningPoolHub
https://github.com/nemosminer/NemosMiner-v2.2/archive/master.zip
v2.2 (tested with 1060's , 1070's and 1080ti's)
Best Regards
Nemo
could you number the versions when making any corrections? https://github.com/nemosminer/NemosMiner-v2.2/archive/master.zip
v2.2 (tested with 1060's , 1070's and 1080ti's)
Best Regards
Nemo
For example "v2.2.xxx"
факт в том, что ВСС (в некоторых источниках BCH) почти в 2 раза за сутки подскочил в цене.
https://screenshots.firefoxusercontent.com/images/ac2f0a89-e89f-459c-a7ee-1c9cedc009ce.png
Ждем 15-18 ноября 2017.
Кто вложился - держат кулаки. Кто не вложился - не менее держат кулаки. Ну, а там как пойдет.
Я из категории "не скажу, куда вложился"
https://screenshots.firefoxusercontent.com/images/ac2f0a89-e89f-459c-a7ee-1c9cedc009ce.png
Ждем 15-18 ноября 2017.
Кто вложился - держат кулаки. Кто не вложился - не менее держат кулаки. Ну, а там как пойдет.
Я из категории "не скажу, куда вложился"
Re: █▓▒░-< [ZPOOL.CA][HashTap™][FlexFee™][SegWit] The miners multipool >-░▒▓█
Hi, guru of mining
I have some questions:
1. Is there a version same of a nemosminer for Linux? Even if in a deep alpha version.
2. Is there a generally available description (preferably detailed) of the algorithm for determining the pool's performance and the profitability of the coin algorithms. There is a desire to use all this in Linux and strain my brains, trying to customize for myself.
if there is no version for Linux, then:
3. is it possible to manage overclocking from the command line with the graphics cards GTX 1070, 1080 as in Linux?
I want for each algorithm to have their own, the maximum settings for overclocking (in Linux, management from the command line is perfectly implemented)
Tnx
I have some questions:
1. Is there a version same of a nemosminer for Linux? Even if in a deep alpha version.
2. Is there a generally available description (preferably detailed) of the algorithm for determining the pool's performance and the profitability of the coin algorithms. There is a desire to use all this in Linux and strain my brains, trying to customize for myself.
if there is no version for Linux, then:
3. is it possible to manage overclocking from the command line with the graphics cards GTX 1070, 1080 as in Linux?
I want for each algorithm to have their own, the maximum settings for overclocking (in Linux, management from the command line is perfectly implemented)
Tnx
WTF?
2x1070 GTX, NemosMiner-v2.2, zpool.ca
When I set to mining lyra2re2 the speed detecting incorrect
but
wrong definition of speed and therefore I mining ONLY lyra2re2.
And after some time I see that
What I do wrong?
2x1070 GTX, NemosMiner-v2.2, zpool.ca
When I set to mining lyra2re2 the speed detecting incorrect
Code:
Type: NVIDIA
Miner Algorithm Speed BTC/Day BTC/GH/Day Pool
----- --------- ----- ------- ---------- ----
ccminerAlexis78 Lyra2RE2 518,26 MH/s 0,00539 0,01040 zpoollive-
ccminerAlexis78 C11 36,06 MH/s 0,00102 0,02842 zpoollive-
CcminerTpruvot Tribus 79,49 MH/s 0,00097 0,01222 zpoollive-
...
...
Miner Algorithm Speed BTC/Day BTC/GH/Day Pool
----- --------- ----- ------- ---------- ----
ccminerAlexis78 Lyra2RE2 518,26 MH/s 0,00539 0,01040 zpoollive-
ccminerAlexis78 C11 36,06 MH/s 0,00102 0,02842 zpoollive-
CcminerTpruvot Tribus 79,49 MH/s 0,00097 0,01222 zpoollive-
...
...
but
Code:
[2017-10-06 18:14:13] [S/A/T]: 0/21/21, diff: 0.318, 85.52MH/s yes!
[2017-10-06 18:14:18] [S/A/T]: 0/22/22, diff: 2.573, 85.64MH/s yes!
[2017-10-06 18:14:26] [S/A/T]: 0/23/23, diff: 0.641, 85.56MH/s yes!
[2017-10-06 18:14:32] [S/A/T]: 0/24/24, diff: 0.502, 85.53MH/s yes!
[2017-10-06 18:15:10] GPU#1:GeForce GTX 1070, 44.07MH/s
[2017-10-06 18:15:19] GPU#0:GeForce GTX 1070, 43.45MH/s
[2017-10-06 18:14:18] [S/A/T]: 0/22/22, diff: 2.573, 85.64MH/s yes!
[2017-10-06 18:14:26] [S/A/T]: 0/23/23, diff: 0.641, 85.56MH/s yes!
[2017-10-06 18:14:32] [S/A/T]: 0/24/24, diff: 0.502, 85.53MH/s yes!
[2017-10-06 18:15:10] GPU#1:GeForce GTX 1070, 44.07MH/s
[2017-10-06 18:15:19] GPU#0:GeForce GTX 1070, 43.45MH/s
wrong definition of speed and therefore I mining ONLY lyra2re2.
And after some time I see that
Code:
[2017-10-06 18:28:47] GPU#1:an illegal memory access was encountered
[2017-10-06 18:28:47] GPU#0:an illegal memory access was encountered
[2017-10-06 18:28:47] GPU#1:an illegal memory access was encountered
[2017-10-06 18:28:47] GPU#0:an illegal memory access was encountered
[2017-10-06 18:28:47] GPU#1:an illegal memory access was encountered
[2017-10-06 18:28:47] GPU#1:an illegal memory access was encountered
[2017-10-06 18:28:47] GPU#0:an illegal memory access was encountered
[2017-10-06 18:28:47] GPU#1:an illegal memory access was encountered
[2017-10-06 18:28:47] GPU#0:an illegal memory access was encountered
[2017-10-06 18:28:47] GPU#1:an illegal memory access was encountered
[2017-10-06 18:28:47] GPU#1:an illegal memory access was encountered
What I do wrong?