.

For those w/ 1080/1080ti's

https://bitcointalk.org/index.php?topic=3370685.0

http://cryptomining-blog.com/9757-get-up-to-about-50-mhs-on-eth-with-gtx-1080-ti-and-ohgodanethlargementpill/

It's a tool that injects modified gddr5x memory timings during runtime. Kicks the ethash up another notch

I have a friend w/ that card. I've seen hynix(AJR), elpida, and samsung. Whatever they have on hand at the time is what goes into these cards.

@vg54dett
This may or may not help but here's the original vbios' for Sapphire 470 4GB blower (samsung,elpida,hynix(ajr))
https://transfer.sh/ti9bP/Sapphire-470-4GB-blower.7z

edit: thanks tadeus1 for spotting my error
looks like the hynix rom isn't the original. At the time I just did the basic mod for a friend. It looks like the hynix rom is slightly modified with 1500 memory strap copied over 1625/1750/2000 strap. I'd have to get the original from him, but I'm sure this will be fine for now

If it has a dual vbios (assuming that hasn't been flashed as well). Flip the switch, boot up and see what memory it has. If no dual vbios, you may have to pull the heatsink to be 100% sure.

Claymore 5.2 crashes for me anytime I send epool.txt or config.txt from ethman v1.5 Windows 10

With debug enabled last line is:


File gets downloaded just fine

Alright, got it going. Did it just like you suggested. Thank you!

It's in the same directory as the other 30 extracted files. I'll give that a shot

Hi,
   I can't seem to run "Install_DblClick_RunInTerminal.py" on raspbian from armory_0.91.2-rc1_rpi_bundle.tar.gz downloaded through armory secure downloader.

Trying to to install an updated offline armory wallet so I don't have to have an additional armory install on my main pc just to sign a tx from an earlier armory version on the pi.

Any ideas? Or just go the cross compiling route?